[Fri Sep 23 02:29:01 2011] Detection parameters:
  Position = (474.2, 401.0) = 12 48 56.69 -41 17 18.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 261.6 +/- 32.8
  Background counts = 236.3
  Rate = 0.006 +/- 0.0008

[Fri Sep 23 02:29:01 2011] Off-axis axis estimate = 14.76'
[Fri Sep 23 05:55:28 2011] Using EEF radius (= 13.81 ")to estimate initial spatial extent for simple fitting
[Fri Sep 23 05:55:28 2011] Initial guess for spatial extent in simple fitting = 13.81"
[Fri Sep 23 05:55:28 2011] source mask rpix=3.2, npix_max = 53, mask sum = 56, frac = 1.037
[Fri Sep 23 05:55:28 2011] Giving source the simple spatial ID 4 for pass 0, mean size = 13.81"
[Fri Sep 23 07:14:15 2011] fullrun_mos2_xmm0504360101_pi300-10000_cl_pass0_src4.ximg exists
[Fri Sep 23 07:14:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504360101_pi300-10000_cl_pass0_src4.csv
[Fri Sep 23 07:14:15 2011] fullrun_mos2_xmm0504360101_pi300-10000_cl_pass0_src4_1.ximg exists
[Fri Sep 23 07:14:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504360101_pi300-10000_cl_pass0_src4.csv
[Fri Sep 23 07:14:15 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504360101_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504360101_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 23 07:14:15 2011] fullrun_mos2_xmm0504360101_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Fri Sep 23 07:14:15 2011] fullrun_mos2_xmm0504360101_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Fri Sep 23 07:14:15 2011] Fit fullrun_mos2_xmm0504360101_pi300-10000_cl_pass0_tfrozen_src4 appears to have run properly
[Fri Sep 23 07:14:30 2011] Warning: source 4 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 10.308805 pixels away
[Fri Sep 23 07:14:30 2011] Spatial fit model total counts = 3844.870000, observed total counts = 3838.000000
[Fri Sep 23 07:14:30 2011] Offset between fit and detection position for source 4 = 8.411998 pixels
[Fri Sep 23 07:14:30 2011] Warning, changing simple spatial fit ID from 4 to 15
[Fri Sep 23 07:14:30 2011] 3656.375000 total counts/ 3254.320000 bgd. counts: snr = 7.047829
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 8.411998 pixels
  Position = (479.4, 394.4) = 12 48 54.70 -41 17 48.5
  Extent = 27.4 (27.4-27.4)", rotation angle = 0
  Source counts = 402.1 +/- 60.5
  Background counts = 3254.3
  Rate = 0.01 +/- 0.002
[Fri Sep 23 07:14:30 2011] Vigneting correction estimate = 1.000000
[Fri Sep 23 07:14:30 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 23 07:14:30 2011] Assessing source extent using major axis lower bound
[Fri Sep 23 07:14:30 2011] Source does appear to be extended
[Fri Sep 23 07:14:30 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 23 07:14:31 2011] Source is confused with source 2
[Fri Sep 23 11:37:52 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Sep 23 11:37:52 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Sep 23 11:37:52 2011] Initial guess for spatial extent in simple fitting = 27.37"
[Fri Sep 23 11:37:52 2011] source mask rpix=6.3, npix_max = 184, mask sum = 147, frac = 0.797
[Fri Sep 23 11:37:52 2011] Giving source the simple spatial ID 4 for pass 1, mean size = 27.37"
[Fri Sep 23 12:41:10 2011] fullrun_mos2_xmm0504360101_pi300-10000_cl_pass1_src4.ximg exists
[Fri Sep 23 12:41:10 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504360101_pi300-10000_cl_pass1_src4.csv
[Fri Sep 23 12:41:10 2011] fullrun_mos2_xmm0504360101_pi300-10000_cl_pass1_src4_1.ximg exists
[Fri Sep 23 12:41:10 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504360101_pi300-10000_cl_pass1_src4.csv
[Fri Sep 23 12:41:10 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504360101_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504360101_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 23 12:41:10 2011] fullrun_mos2_xmm0504360101_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Fri Sep 23 12:41:10 2011] fullrun_mos2_xmm0504360101_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Fri Sep 23 12:41:10 2011] Fit fullrun_mos2_xmm0504360101_pi300-10000_cl_pass1_tfrozen_src4 appears to have run properly
[Fri Sep 23 12:41:21 2011] Warning, spatial fit 4 centroid is now closest to src. 2
[Fri Sep 23 12:41:21 2011] Vigneting correction estimate = 1.000000
[Fri Sep 23 12:41:21 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 23 12:41:21 2011] Assessing source extent using major axis lower bound
[Fri Sep 23 12:41:21 2011] Source does appear to be extended
[Fri Sep 23 12:41:21 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 23 14:38:18 2011] XMMSAS src. selection expression = ellipse(41657.054000, 34260.548000, 1641.990047, 1641.990047, 0.000000, X, Y)
[Fri Sep 23 14:38:18 2011] Writing source region out to fullrun_mos2_xmm0504360101_pi300-10000_pass1_cl_src4_src.reg
[Fri Sep 23 14:38:18 2011] Extracting stamp from image fullrun_mos2_xmm0504360101_pi300-10000_cl_sm2.00.img.gz, (385, 300) - (574, 489)
[Fri Sep 23 14:38:18 2011] XMMSAS bgd. selection expression = annulus(41657.054000, 34260.548000, 2736.650079, 5473.300157, X, Y) && !ellipse(41927.608000, 33257.886000, 5734.560165, 5734.560165, 0.000000, X, Y) && !ellipse(42668.667267, 30674.957397, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40603.785400, 31635.726800, 591.048017, 591.048017, 0.000000, X, Y) && !ellipse(39046.155914, 34175.472809, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41309.435638, 35580.400146, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40948.236000, 35330.120000, 2118.496061, 2118.496061, 0.000000, X, Y) && !ellipse(40318.692871, 32653.830383, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40983.640000, 30516.686000, 1272.936037, 1272.936037, 0.000000, X, Y) && !ellipse(42764.290000, 30365.079800, 1896.648055, 1896.648055, 0.000000, X, Y)
[Fri Sep 23 14:38:18 2011] Writing fullrun_mos2_xmm0504360101_pi300-10000_pass1_cl_src4.gif
[Fri Sep 23 14:44:37 2011] Mean detx,y = (-16247.64, -2515.27) 
[Fri Sep 23 14:44:38 2011] Setting backscal keywords in source and bgd. spectrum
[Fri Sep 23 14:44:52 2011] Binned source spectrum to 10 counts/bin
[Fri Sep 23 14:44:52 2011] Setting source spectrum file to fullrun_mos2_xmm0504360101_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Fri Sep 23 14:44:52 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0504360101_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Fri Sep 23 15:26:55 2011] Updating aperture counts using extracted products
[Fri Sep 23 15:26:55 2011] Error reading totcts from fullrun_mos2_xmm0504360101_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Fri Sep 23 15:26:55 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 23 15:26:55 2011] Using photon index=1.80, rate=0.0113, arf fullrun_mos2_xmm0504360101_pi300-10000_pass1_cl_src4.arf
[Fri Sep 23 15:26:55 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Sep 23 15:26:55 2011] Updating source flux to 2.9e-13
[Fri Sep 23 15:27:31 2011] Flag c found in src. 4 procflags, skipping spectral fitting