[Fri Sep 23 02:28:39 2011] Detection parameters:
  Position = (325.0, 408.5) = 12 49 54.28 -41 16 48.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 139.1 +/- 21.0
  Background counts = 141.0
  Rate = 0.004 +/- 0.0007

[Fri Sep 23 02:28:39 2011] Off-axis axis estimate = 8.21'
[Fri Sep 23 05:06:59 2011] Using EEF radius (= 10.53 ")to estimate initial spatial extent for simple fitting
[Fri Sep 23 05:06:59 2011] Initial guess for spatial extent in simple fitting = 10.53"
[Fri Sep 23 05:06:59 2011] source mask rpix=2.4, npix_max = 34, mask sum = 30, frac = 0.879
[Fri Sep 23 05:06:59 2011] Giving source the simple spatial ID 10 for pass 0, mean size = 10.53"
[Fri Sep 23 05:55:28 2011] fullrun_mos1_xmm0504360101_pi300-10000_cl_pass0_src10.ximg exists
[Fri Sep 23 05:55:28 2011] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0504360101_pi300-10000_cl_pass0_src10.csv
[Fri Sep 23 05:55:28 2011] fullrun_mos1_xmm0504360101_pi300-10000_cl_pass0_src10_1.ximg exists
[Fri Sep 23 05:55:28 2011] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0504360101_pi300-10000_cl_pass0_src10.csv
[Fri Sep 23 05:55:28 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0504360101_pi300-10000_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0504360101_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 23 05:55:28 2011] fullrun_mos1_xmm0504360101_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Fri Sep 23 05:55:28 2011] fullrun_mos1_xmm0504360101_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Fri Sep 23 05:55:28 2011] Fit fullrun_mos1_xmm0504360101_pi300-10000_cl_pass0_tfrozen_src10 appears to have run properly
[Fri Sep 23 07:14:26 2011] Spatial fit model total counts = 1063.780000, observed total counts = 1063.000000
[Fri Sep 23 07:14:26 2011] Offset between fit and detection position for source 18 = 0.330703 pixels
[Fri Sep 23 07:14:26 2011] 1057.773000 total counts/ 922.719000 bgd. counts: snr = 4.446033
Spatial fit parameters:
  Offset between fit and detection position for source 18 = 0.330703 pixels
  Position = (324.8, 408.8) = 12 49 54.37 -41 16 47.2
  Extent = 7.2 (4.6-10.1)", rotation angle = 0
  Source counts = 135.1 +/- 32.5
  Background counts = 922.7
  Rate = 0.004 +/- 0.0009
[Fri Sep 23 07:14:26 2011] Vigneting correction estimate = 1.000000
[Fri Sep 23 07:14:26 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 23 07:14:26 2011] Assessing source extent using major axis lower bound
[Fri Sep 23 07:14:26 2011] Source does appear to be extended
[Fri Sep 23 07:14:26 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 23 10:36:53 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Sep 23 10:36:53 2011] Initial guess for spatial extent in simple fitting = 7.23"
[Fri Sep 23 10:36:53 2011] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.856
[Fri Sep 23 10:36:53 2011] Giving source the simple spatial ID 10 for pass 1, mean size = 7.23"
[Fri Sep 23 11:37:51 2011] fullrun_mos1_xmm0504360101_pi300-10000_cl_pass1_src10.ximg exists
[Fri Sep 23 11:37:51 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504360101_pi300-10000_cl_pass1_src10.csv
[Fri Sep 23 11:37:51 2011] fullrun_mos1_xmm0504360101_pi300-10000_cl_pass1_src10_1.ximg exists
[Fri Sep 23 11:37:51 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504360101_pi300-10000_cl_pass1_src10.csv
[Fri Sep 23 11:37:51 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0504360101_pi300-10000_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0504360101_pi300-10000_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 23 11:37:52 2011] fullrun_mos1_xmm0504360101_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Fri Sep 23 11:37:52 2011] fullrun_mos1_xmm0504360101_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Fri Sep 23 11:37:52 2011] Fit fullrun_mos1_xmm0504360101_pi300-10000_cl_pass1_tfrozen_src10 appears to have run properly
[Fri Sep 23 12:41:18 2011] Spatial fit model total counts = 1068.000000, observed total counts = 1068.000000
[Fri Sep 23 12:41:18 2011] Offset between fit and detection position for source 18 = 0.037468 pixels
[Fri Sep 23 12:41:18 2011] 1059.261000 total counts/ 933.770000 bgd. counts: snr = 4.106697
Spatial fit parameters:
  Offset between fit and detection position for source 18 = 0.037468 pixels
  Position = (324.8, 408.8) = 12 49 54.37 -41 16 47.1
  Extent = 6.9 (4.1-9.4)", rotation angle = 0
  Source counts = 125.5 +/- 32.5
  Background counts = 933.8
  Rate = 0.004 +/- 0.0009
[Fri Sep 23 12:41:18 2011] Vigneting correction estimate = 1.000000
[Fri Sep 23 12:41:18 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 23 12:41:18 2011] Assessing source extent using major axis lower bound
[Fri Sep 23 12:41:18 2011] Source does appear to be extended
[Fri Sep 23 12:41:18 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 23 14:18:21 2011] XMMSAS src. selection expression = ellipse(28207.505200, 35515.923520, 414.991212, 414.991212, 0.000000, X, Y)
[Fri Sep 23 14:18:21 2011] Writing source region out to fullrun_mos1_xmm0504360101_pi300-10000_pass1_cl_src18_src.reg
[Fri Sep 23 14:18:21 2011] Extracting stamp from image fullrun_mos1_xmm0504360101_pi300-10000_cl_sm2.00.img.gz, (301, 385) - (349, 433)
[Fri Sep 23 14:18:21 2011] XMMSAS bgd. selection expression = annulus(28207.505200, 35515.923520, 691.652020, 1383.304040, X, Y)
[Fri Sep 23 14:18:21 2011] Writing fullrun_mos1_xmm0504360101_pi300-10000_pass1_cl_src18.gif
[Fri Sep 23 14:21:37 2011] Mean detx,y = (5778.17, 5390.20) 
[Fri Sep 23 14:21:38 2011] Setting backscal keywords in source and bgd. spectrum
[Fri Sep 23 14:21:51 2011] Binned source spectrum to 10 counts/bin
[Fri Sep 23 14:21:51 2011] Setting source spectrum file to fullrun_mos1_xmm0504360101_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Fri Sep 23 14:21:51 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0504360101_pi300-10000_pass1_cl_src18_bgd.pi.gz
[Fri Sep 23 15:26:54 2011] Updating aperture counts using extracted products
[Fri Sep 23 15:26:54 2011] Error reading totcts from fullrun_mos1_xmm0504360101_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Fri Sep 23 15:26:55 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 23 15:26:55 2011] Using photon index=1.80, rate=0.00354, arf fullrun_mos1_xmm0504360101_pi300-10000_pass1_cl_src18.arf
[Fri Sep 23 15:26:55 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Sep 23 15:26:55 2011] Updating source flux to 5.3e-14