[Fri Sep 23 02:28:39 2011] Detection parameters:
  Position = (476.5, 404.8) = 12 48 55.82 -41 17 1.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 201.5 +/- 28.3
  Background counts = 212.1
  Rate = 0.005 +/- 0.0007

[Fri Sep 23 02:28:39 2011] Off-axis axis estimate = 15.04'
[Fri Sep 23 05:06:59 2011] Using EEF radius (= 13.95 ")to estimate initial spatial extent for simple fitting
[Fri Sep 23 05:06:59 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Sep 23 05:06:59 2011] Initial guess for spatial extent in simple fitting = 13.95"
[Fri Sep 23 05:06:59 2011] source mask rpix=3.2, npix_max = 54, mask sum = 52, frac = 0.946
[Fri Sep 23 05:06:59 2011] Giving source the simple spatial ID 7 for pass 0, mean size = 13.95"
[Fri Sep 23 05:55:28 2011] fullrun_mos1_xmm0504360101_pi300-10000_cl_pass0_src7.ximg exists
[Fri Sep 23 05:55:28 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504360101_pi300-10000_cl_pass0_src7.csv
[Fri Sep 23 05:55:28 2011] fullrun_mos1_xmm0504360101_pi300-10000_cl_pass0_src7_1.ximg exists
[Fri Sep 23 05:55:28 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504360101_pi300-10000_cl_pass0_src7.csv
[Fri Sep 23 05:55:28 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0504360101_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0504360101_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 23 05:55:28 2011] fullrun_mos1_xmm0504360101_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Fri Sep 23 05:55:28 2011] fullrun_mos1_xmm0504360101_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Fri Sep 23 05:55:28 2011] Fit fullrun_mos1_xmm0504360101_pi300-10000_cl_pass0_tfrozen_src7 appears to have run properly
[Fri Sep 23 07:14:26 2011] Warning: source 7 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 17 at 18.657572 pixels away
[Fri Sep 23 07:14:26 2011] Source 17 is offset by 1.337333 and 4.665611 pixels which is larger than
2 X fitted extent = 1.519678 x 1.519678, not incorporating fit results
[Fri Sep 23 07:14:26 2011] Vigneting correction estimate = 1.000000
[Fri Sep 23 07:14:26 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 23 07:14:26 2011] Assessing source extent using major
[Fri Sep 23 07:14:26 2011] Source does appear to be extended
[Fri Sep 23 07:14:26 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 23 10:36:53 2011] Using EEF radius (= 13.95 ")to estimate initial spatial extent for simple fitting
[Fri Sep 23 10:36:53 2011] Initial guess for spatial extent in simple fitting = 13.95"
[Fri Sep 23 10:36:53 2011] source mask rpix=3.2, npix_max = 54, mask sum = 52, frac = 0.946
[Fri Sep 23 10:36:53 2011] Giving source the simple spatial ID 7 for pass 1, mean size = 13.95"
[Fri Sep 23 11:37:51 2011] fullrun_mos1_xmm0504360101_pi300-10000_cl_pass1_src7.ximg exists
[Fri Sep 23 11:37:51 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504360101_pi300-10000_cl_pass1_src7.csv
[Fri Sep 23 11:37:51 2011] fullrun_mos1_xmm0504360101_pi300-10000_cl_pass1_src7_1.ximg exists
[Fri Sep 23 11:37:51 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504360101_pi300-10000_cl_pass1_src7.csv
[Fri Sep 23 11:37:51 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0504360101_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0504360101_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 23 11:37:52 2011] fullrun_mos1_xmm0504360101_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Fri Sep 23 11:37:52 2011] fullrun_mos1_xmm0504360101_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Fri Sep 23 11:37:52 2011] Fit fullrun_mos1_xmm0504360101_pi300-10000_cl_pass1_tfrozen_src7 appears to have run properly
[Fri Sep 23 12:41:18 2011] Warning: source 7 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 17 at 19.325835 pixels away
[Fri Sep 23 12:41:18 2011] Vigneting correction estimate = 1.000000
[Fri Sep 23 12:41:18 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 23 12:41:18 2011] Assessing source extent using major
[Fri Sep 23 12:41:18 2011] Source does appear to be extended
[Fri Sep 23 12:41:18 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 23 14:18:21 2011] XMMSAS src. selection expression = ellipse(41406.545990, 35171.106140, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Sep 23 14:18:21 2011] Writing source region out to fullrun_mos1_xmm0504360101_pi300-10000_pass1_cl_src17_src.reg
[Fri Sep 23 14:18:21 2011] Extracting stamp from image fullrun_mos1_xmm0504360101_pi300-10000_cl_sm2.00.img.gz, (439, 367) - (514, 442)
[Fri Sep 23 14:18:21 2011] XMMSAS bgd. selection expression = annulus(41406.545990, 35171.106140, 1087.500000, 2175.000000, X, Y) && !ellipse(42254.033997, 33179.419983, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(42058.066000, 32182.006000, 1702.016049, 1702.016049, 0.000000, X, Y) && !ellipse(39043.707977, 34220.034821, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40703.714600, 33262.386993, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40884.984070, 34459.340576, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40264.886047, 32925.397400, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39500.394257, 33229.586761, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40271.714783, 33639.855164, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Sep 23 14:18:21 2011] Writing fullrun_mos1_xmm0504360101_pi300-10000_pass1_cl_src17.gif
[Fri Sep 23 14:20:45 2011] Mean detx,y = (-1099.47, 16489.64) 
[Fri Sep 23 14:20:46 2011] Setting backscal keywords in source and bgd. spectrum
[Fri Sep 23 14:21:02 2011] Binned source spectrum to 10 counts/bin
[Fri Sep 23 14:21:02 2011] Setting source spectrum file to fullrun_mos1_xmm0504360101_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Fri Sep 23 14:21:02 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0504360101_pi300-10000_pass1_cl_src17_bgd.pi.gz
[Fri Sep 23 14:31:46 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Sep 23 14:31:46 2011] rmf not generated due to insufficient counts
[Fri Sep 23 15:26:54 2011] Updating aperture counts using extracted products
[Fri Sep 23 15:26:54 2011] Error reading totcts from fullrun_mos1_xmm0504360101_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Fri Sep 23 15:26:54 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 23 15:26:54 2011] Using photon index=1.80, rate=0.00477, arf fullrun_mos1_xmm0504360101_pi300-10000_pass1_cl_src17.arf
[Fri Sep 23 15:26:54 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Sep 23 15:26:54 2011] Updating source flux to 1.4e-13
[Fri Sep 23 15:26:56 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting