[Fri Sep 23 02:28:39 2011] Detection parameters:
  Position = (486.2, 381.9) = 12 48 52.03 -41 18 43.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 3704.5 +/- 78.3
  Background counts = 217.8
  Rate = 0.09 +/- 0.002

[Fri Sep 23 02:28:39 2011] Off-axis axis estimate = 14.90'
[Fri Sep 23 05:06:59 2011] Using EEF radius (= 13.88 ")to estimate initial spatial extent for simple fitting
[Fri Sep 23 05:06:59 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Sep 23 05:06:59 2011] Initial guess for spatial extent in simple fitting = 13.88"
[Fri Sep 23 05:06:59 2011] source mask rpix=3.2, npix_max = 54, mask sum = 50, frac = 0.918
[Fri Sep 23 05:06:59 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 13.88"
[Fri Sep 23 05:55:28 2011] fullrun_mos1_xmm0504360101_pi300-10000_cl_pass0_src1.ximg exists
[Fri Sep 23 05:55:28 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504360101_pi300-10000_cl_pass0_src1.csv
[Fri Sep 23 05:55:28 2011] fullrun_mos1_xmm0504360101_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri Sep 23 05:55:28 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504360101_pi300-10000_cl_pass0_src1.csv
[Fri Sep 23 05:55:28 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0504360101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0504360101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 23 05:55:28 2011] fullrun_mos1_xmm0504360101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri Sep 23 05:55:28 2011] fullrun_mos1_xmm0504360101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Sep 23 05:55:28 2011] Fit fullrun_mos1_xmm0504360101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Sep 23 07:14:26 2011] Warning, spatial fit 1 centroid is now closest to src. 12
[Fri Sep 23 07:14:26 2011] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 10.738676 pixels away
[Fri Sep 23 07:14:26 2011] Warning: source 9 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 10.936015 pixels away
[Fri Sep 23 07:14:26 2011] Vigneting correction estimate = 1.000000
[Fri Sep 23 07:14:26 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 23 07:14:26 2011] Assessing source extent using major
[Fri Sep 23 07:14:26 2011] Source does appear to be extended
[Fri Sep 23 07:14:26 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 23 07:14:26 2011] Source is confused with source 2
[Fri Sep 23 10:36:53 2011] Using EEF radius (= 13.88 ")to estimate initial spatial extent for simple fitting
[Fri Sep 23 10:36:53 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Sep 23 10:36:53 2011] Initial guess for spatial extent in simple fitting = 13.88"
[Fri Sep 23 10:36:53 2011] source mask rpix=3.2, npix_max = 54, mask sum = 50, frac = 0.918
[Fri Sep 23 10:36:53 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 13.88"
[Fri Sep 23 11:37:51 2011] fullrun_mos1_xmm0504360101_pi300-10000_cl_pass1_src1.ximg exists
[Fri Sep 23 11:37:51 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504360101_pi300-10000_cl_pass1_src1.csv
[Fri Sep 23 11:37:51 2011] fullrun_mos1_xmm0504360101_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Sep 23 11:37:51 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504360101_pi300-10000_cl_pass1_src1.csv
[Fri Sep 23 11:37:51 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0504360101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0504360101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 23 11:37:52 2011] fullrun_mos1_xmm0504360101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Sep 23 11:37:52 2011] fullrun_mos1_xmm0504360101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Sep 23 11:37:52 2011] Fit fullrun_mos1_xmm0504360101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Sep 23 12:41:18 2011] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 17.954608 pixels away
[Fri Sep 23 12:41:18 2011] Warning: source 9 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 10.944012 pixels away
[Fri Sep 23 12:41:18 2011] Vigneting correction estimate = 1.000000
[Fri Sep 23 12:41:18 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 23 12:41:18 2011] Assessing source extent using major
[Fri Sep 23 12:41:18 2011] Source does appear to be extended
[Fri Sep 23 12:41:18 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 23 14:18:20 2011] Counts = 3704.494873, rescaling region sizes by 2.000000
[Fri Sep 23 14:18:20 2011] XMMSAS src. selection expression = ellipse(42254.033997, 33179.419983, 1305.000000, 1305.000000, 0.000000, X, Y)
[Fri Sep 23 14:18:20 2011] Writing source region out to fullrun_mos1_xmm0504360101_pi300-10000_pass1_cl_src1_src.reg
[Fri Sep 23 14:18:20 2011] Extracting stamp from image fullrun_mos1_xmm0504360101_pi300-10000_cl_sm2.00.img.gz, (411, 307) - (561, 457)
[Fri Sep 23 14:18:20 2011] XMMSAS bgd. selection expression = annulus(42254.033997, 33179.419983, 4350.000000, 8700.000000, X, Y) && !ellipse(42058.066000, 32182.006000, 1702.016049, 1702.016049, 0.000000, X, Y) && !ellipse(39043.707977, 34220.034821, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41881.628967, 31202.663055, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41406.545990, 35171.106140, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40703.714600, 33262.386993, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40884.984070, 34459.340576, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40463.543800, 31904.401200, 881.152025, 881.152025, 0.000000, X, Y) && !ellipse(42325.496765, 30590.240723, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40264.886047, 32925.397400, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39500.394257, 33229.586761, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40271.714783, 33639.855164, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41442.710144, 31026.815155, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Sep 23 14:18:20 2011] Writing fullrun_mos1_xmm0504360101_pi300-10000_pass1_cl_src1.gif
[Fri Sep 23 14:18:26 2011] Mean detx,y = (-3149.60, 16102.41) 
[Fri Sep 23 14:18:27 2011] Setting backscal keywords in source and bgd. spectrum
[Fri Sep 23 14:19:19 2011] Binned source spectrum to 10 counts/bin
[Fri Sep 23 14:19:19 2011] Setting source spectrum file to fullrun_mos1_xmm0504360101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Sep 23 14:19:19 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0504360101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Fri Sep 23 14:23:53 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Sep 23 14:23:53 2011] rmf not generated due to insufficient counts
[Fri Sep 23 15:26:54 2011] Updating aperture counts using extracted products
[Fri Sep 23 15:26:54 2011] Error reading totcts from fullrun_mos1_xmm0504360101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Sep 23 15:26:54 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 23 15:26:54 2011] Using photon index=1.80, rate=0.0878, arf fullrun_mos1_xmm0504360101_pi300-10000_pass1_cl_src1.arf
[Fri Sep 23 15:26:54 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Sep 23 15:26:54 2011] Updating source flux to 2.4e-12
[Fri Sep 23 15:26:56 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri Sep 23 15:27:31 2011] xmm0504360101/analysis//spectral/fullrun_mos1_xmm0504360101_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete