[Wed May 23 04:19:09 2012] Detection parameters:
  Position = (257.3, 344.3) = 7 21 33.83 55 48 23.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 122.2 +/- 28.7
  Background counts = 384.7
  Rate = 0.004 +/- 0.001

[Wed May 23 04:19:10 2012] Off-axis axis estimate = 4.47'
[Wed May 23 04:26:29 2012] Using EEF radius (= 8.66 ")to estimate initial spatial extent for simple fitting
[Wed May 23 04:26:29 2012] Initial guess for spatial extent in simple fitting = 8.66"
[Wed May 23 04:26:29 2012] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.007
[Wed May 23 04:26:29 2012] Giving source the simple spatial ID 35 for pass 0, mean size = 8.66"
[Wed May 23 07:29:06 2012] fullrun_pn_xmm0504320201_pi300-10000_cl_pass0_src35.ximg exists
[Wed May 23 07:29:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504320201_pi300-10000_cl_pass0_src35.csv
[Wed May 23 07:29:06 2012] fullrun_pn_xmm0504320201_pi300-10000_cl_pass0_src35_1.ximg exists
[Wed May 23 07:29:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504320201_pi300-10000_cl_pass0_src35.csv
[Wed May 23 07:29:06 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0504320201_pi300-10000_cl_pass0_src35_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0504320201_pi300-10000_cl_pass0_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 23 07:29:07 2012] fullrun_pn_xmm0504320201_pi300-10000_cl_pass0_tfrozen_src35.ximg exists
[Wed May 23 07:29:07 2012] fullrun_pn_xmm0504320201_pi300-10000_cl_pass0_tfrozen_src35_1.ximg exists
[Wed May 23 07:29:07 2012] Fit fullrun_pn_xmm0504320201_pi300-10000_cl_pass0_tfrozen_src35 appears to have run properly
[Wed May 23 09:33:25 2012] Spatial fit model total counts = 4335.200000, observed total counts = 4136.000000
[Wed May 23 09:33:25 2012] Offset between fit and detection position for source 39 = 7.469849 pixels
[Wed May 23 09:33:25 2012] 4311.865000 total counts/ 4098.440000 bgd. counts: snr = 3.333773
Spatial fit parameters:
  Offset between fit and detection position for source 39 = 7.469849 pixels
  Position = (250.0, 345.8) = 7 21 37.62 55 48 26.0
  Extent = 17.3 (17.3-34.6)", rotation angle = 0
  Source counts = 213.4 +/- 65.7
  Background counts = 4098.4
  Rate = 0.007 +/- 0.002
[Wed May 23 09:33:25 2012] Vigneting correction estimate = 1.000000
[Wed May 23 09:33:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 23 09:33:25 2012] Assessing source extent using major axis lower bound
[Wed May 23 09:33:25 2012] Source does appear to be extended
[Wed May 23 09:33:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 23 09:33:25 2012] Source is confused with source 42
[Wed May 23 09:33:57 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed May 23 09:33:57 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed May 23 09:33:57 2012] Initial guess for spatial extent in simple fitting = 17.32"
[Wed May 23 09:33:57 2012] source mask rpix=4.0, npix_max = 80, mask sum = 40, frac = 0.498
[Wed May 23 09:33:57 2012] Skipping simple spatial due to low active detector fraction
[Wed May 23 14:07:19 2012] Vigneting correction estimate = 1.000000
[Wed May 23 14:07:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 23 14:07:19 2012] Assessing source extent using major axis lower bound
[Wed May 23 14:07:19 2012] Source does appear to be extended
[Wed May 23 14:07:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 23 14:07:49 2012] XMMSAS src. selection expression = ellipse(21702.940000, 30032.290200, 1039.386030, 1039.386030, 0.000000, X, Y)
[Wed May 23 14:07:49 2012] Writing source region out to fullrun_pn_xmm0504320201_pi300-10000_pass1_cl_src39_src.reg
[Wed May 23 14:07:49 2012] Extracting stamp from image fullrun_pn_xmm0504320201_pi300-10000_cl_sm2.00.img.gz, (190, 286) - (310, 405)
[Wed May 23 14:07:49 2012] XMMSAS bgd. selection expression = annulus(21702.940000, 30032.290200, 1732.310050, 3464.620100, X, Y) && !ellipse(23464.864000, 27070.118200, 1171.192034, 1171.192034, 0.000000, X, Y) && !ellipse(22860.800400, 25752.964000, 1234.440036, 1234.440036, 0.000000, X, Y) && !ellipse(24411.119580, 30324.241400, 631.434418, 631.434418, 0.000000, X, Y) && !ellipse(22910.794540, 29004.314400, 685.252020, 685.252020, 0.000000, X, Y) && !ellipse(22072.565567, 28658.300690, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22893.693115, 28571.486542, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21748.560394, 28231.000275, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23873.640533, 28048.533386, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21117.517014, 27284.909790, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24601.867279, 26494.786346, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22759.430939, 30042.901123, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23982.042725, 29781.170990, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22928.798200, 29200.488000, 1296.784037, 1296.784037, 0.000000, X, Y) && !ellipse(22212.660843, 29524.283630, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23662.940000, 29263.094000, 1316.720038, 1316.720038, 0.000000, X, Y) && !ellipse(24135.383942, 29178.731567, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23351.717529, 28836.957611, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24706.215240, 27876.625549, 870.000000, 870.000000, 0.000000, X, Y)
[Wed May 23 14:07:49 2012] Writing fullrun_pn_xmm0504320201_pi300-10000_pass1_cl_src39.gif
[Wed May 23 14:37:52 2012] Mean detx,y = (2775.72, 5692.41) 
[Wed May 23 14:37:58 2012] Setting backscal keywords in source and bgd. spectrum
[Wed May 23 14:38:39 2012] Binned source spectrum to 10 counts/bin
[Wed May 23 14:38:40 2012] Setting source spectrum file to fullrun_pn_xmm0504320201_pi300-10000_pass1_cl_src39_src_b10.pi.gz
[Wed May 23 14:38:40 2012] Setting bgd. spectrum file to fullrun_pn_xmm0504320201_pi300-10000_pass1_cl_src39_bgd.pi.gz
[Wed May 23 18:28:21 2012] Updating aperture counts using extracted products
[Wed May 23 18:28:21 2012] Error reading totcts from fullrun_pn_xmm0504320201_pi300-10000_pass1_cl_src39_src_b10.pi.gz
[Wed May 23 18:28:23 2012] Calculating source flux in energy range 0.30-8.00
[Wed May 23 18:28:23 2012] Using photon index=1.80, rate=0.00748, arf fullrun_pn_xmm0504320201_pi300-10000_pass1_cl_src39.arf
[Wed May 23 18:28:23 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 23 18:28:24 2012] Updating source flux to 5.1e-14
[Wed May 23 18:32:27 2012] Flag c found in src. 39 procflags, skipping spectral fitting