[Wed May 23 04:19:09 2012] Detection parameters:
  Position = (267.9, 256.9) = 7 21 28.34 55 41 59.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 268.7 +/- 30.9
  Background counts = 270.8
  Rate = 0.008 +/- 0.0009

[Wed May 23 04:19:10 2012] Off-axis axis estimate = 3.74'
[Wed May 23 04:26:29 2012] Using EEF radius (= 8.30 ")to estimate initial spatial extent for simple fitting
[Wed May 23 04:26:29 2012] Initial guess for spatial extent in simple fitting = 8.30"
[Wed May 23 04:26:29 2012] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.078
[Wed May 23 04:26:29 2012] Giving source the simple spatial ID 26 for pass 0, mean size = 8.30"
[Wed May 23 07:29:06 2012] fullrun_pn_xmm0504320201_pi300-10000_cl_pass0_src26.ximg exists
[Wed May 23 07:29:06 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0504320201_pi300-10000_cl_pass0_src26.csv
[Wed May 23 07:29:06 2012] fullrun_pn_xmm0504320201_pi300-10000_cl_pass0_src26_1.ximg exists
[Wed May 23 07:29:06 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0504320201_pi300-10000_cl_pass0_src26.csv
[Wed May 23 07:29:06 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0504320201_pi300-10000_cl_pass0_src26_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0504320201_pi300-10000_cl_pass0_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 23 07:29:07 2012] fullrun_pn_xmm0504320201_pi300-10000_cl_pass0_tfrozen_src26.ximg exists
[Wed May 23 07:29:07 2012] fullrun_pn_xmm0504320201_pi300-10000_cl_pass0_tfrozen_src26_1.ximg exists
[Wed May 23 07:29:07 2012] Fit fullrun_pn_xmm0504320201_pi300-10000_cl_pass0_tfrozen_src26 appears to have run properly
[Wed May 23 09:33:25 2012] Spatial fit model total counts = 3000.370000, observed total counts = 2990.000000
[Wed May 23 09:33:25 2012] Offset between fit and detection position for source 29 = 0.166922 pixels
[Wed May 23 09:33:25 2012] 3046.644000 total counts/ 2837.440000 bgd. counts: snr = 3.927414
Spatial fit parameters:
  Offset between fit and detection position for source 29 = 0.166922 pixels
  Position = (267.8, 256.8) = 7 21 28.42 55 41 59.2
  Extent = 6.8 (5.4-9.0)", rotation angle = 0
  Source counts = 209.2 +/- 55.2
  Background counts = 2837.4
  Rate = 0.007 +/- 0.002
[Wed May 23 09:33:25 2012] Vigneting correction estimate = 1.000000
[Wed May 23 09:33:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 23 09:33:25 2012] Assessing source extent using major axis lower bound
[Wed May 23 09:33:25 2012] Source does appear to be extended
[Wed May 23 09:33:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 23 09:33:57 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed May 23 09:33:57 2012] Initial guess for spatial extent in simple fitting = 6.81"
[Wed May 23 09:33:57 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.938
[Wed May 23 09:33:57 2012] Giving source the simple spatial ID 21 for pass 1, mean size = 6.81"
[Wed May 23 11:59:20 2012] fullrun_pn_xmm0504320201_pi300-10000_cl_pass1_src21.ximg exists
[Wed May 23 11:59:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504320201_pi300-10000_cl_pass1_src21.csv
[Wed May 23 11:59:20 2012] fullrun_pn_xmm0504320201_pi300-10000_cl_pass1_src21_1.ximg exists
[Wed May 23 11:59:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504320201_pi300-10000_cl_pass1_src21.csv
[Wed May 23 11:59:20 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0504320201_pi300-10000_cl_pass1_src21_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0504320201_pi300-10000_cl_pass1_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 23 11:59:20 2012] fullrun_pn_xmm0504320201_pi300-10000_cl_pass1_tfrozen_src21.ximg exists
[Wed May 23 11:59:20 2012] fullrun_pn_xmm0504320201_pi300-10000_cl_pass1_tfrozen_src21_1.ximg exists
[Wed May 23 11:59:20 2012] Fit fullrun_pn_xmm0504320201_pi300-10000_cl_pass1_tfrozen_src21 appears to have run properly
[Wed May 23 14:07:18 2012] Spatial fit model total counts = 3000.420000, observed total counts = 2990.000000
[Wed May 23 14:07:18 2012] Offset between fit and detection position for source 29 = 0.006222 pixels
[Wed May 23 14:07:18 2012] 3046.720000 total counts/ 2840.170000 bgd. counts: snr = 3.875726
Spatial fit parameters:
  Offset between fit and detection position for source 29 = 0.006222 pixels
  Position = (267.8, 256.8) = 7 21 28.42 55 41 59.2
  Extent = 6.7 (5.4-9.0)", rotation angle = 0
  Source counts = 206.6 +/- 55.2
  Background counts = 2840.2
  Rate = 0.007 +/- 0.002
[Wed May 23 14:07:19 2012] Vigneting correction estimate = 1.000000
[Wed May 23 14:07:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 23 14:07:19 2012] Assessing source extent using major axis lower bound
[Wed May 23 14:07:19 2012] Source does appear to be extended
[Wed May 23 14:07:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 23 14:07:48 2012] XMMSAS src. selection expression = ellipse(23246.390200, 22294.005400, 403.226412, 403.226412, 0.000000, X, Y)
[Wed May 23 14:07:48 2012] Writing source region out to fullrun_pn_xmm0504320201_pi300-10000_pass1_cl_src29_src.reg
[Wed May 23 14:07:48 2012] Extracting stamp from image fullrun_pn_xmm0504320201_pi300-10000_cl_sm2.00.img.gz, (245, 234) - (291, 280)
[Wed May 23 14:07:49 2012] XMMSAS bgd. selection expression = annulus(23246.390200, 22294.005400, 672.044019, 1344.088039, X, Y) && !ellipse(22789.793854, 23726.429779, 870.000000, 870.000000, 0.000000, X, Y)
[Wed May 23 14:07:49 2012] Writing fullrun_pn_xmm0504320201_pi300-10000_pass1_cl_src29.gif
[Wed May 23 14:32:31 2012] Mean detx,y = (1750.58, -2021.33) 
[Wed May 23 14:32:38 2012] Setting backscal keywords in source and bgd. spectrum
[Wed May 23 14:33:01 2012] Binned source spectrum to 10 counts/bin
[Wed May 23 14:33:01 2012] Setting source spectrum file to fullrun_pn_xmm0504320201_pi300-10000_pass1_cl_src29_src_b10.pi.gz
[Wed May 23 14:33:01 2012] Setting bgd. spectrum file to fullrun_pn_xmm0504320201_pi300-10000_pass1_cl_src29_bgd.pi.gz
[Wed May 23 18:28:21 2012] Updating aperture counts using extracted products
[Wed May 23 18:28:21 2012] Error reading totcts from fullrun_pn_xmm0504320201_pi300-10000_pass1_cl_src29_src_b10.pi.gz
[Wed May 23 18:28:23 2012] Calculating source flux in energy range 0.30-8.00
[Wed May 23 18:28:23 2012] Using photon index=1.80, rate=0.00724, arf fullrun_pn_xmm0504320201_pi300-10000_pass1_cl_src29.arf
[Wed May 23 18:28:23 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 23 18:28:23 2012] Updating source flux to 2.2e-14