[Wed May 23 04:19:08 2012] Detection parameters:
  Position = (254.3, 330.0) = 7 21 35.41 55 47 18.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 231.9 +/- 34.2
  Background counts = 438.6
  Rate = 0.007 +/- 0.001

[Wed May 23 04:19:10 2012] Off-axis axis estimate = 3.93'
[Wed May 23 04:26:29 2012] Using EEF radius (= 8.40 ")to estimate initial spatial extent for simple fitting
[Wed May 23 04:26:29 2012] Initial guess for spatial extent in simple fitting = 8.40"
[Wed May 23 04:26:29 2012] source mask rpix=1.9, npix_max = 23, mask sum = 20, frac = 0.847
[Wed May 23 04:26:29 2012] Giving source the simple spatial ID 15 for pass 0, mean size = 8.40"
[Wed May 23 07:29:06 2012] fullrun_pn_xmm0504320201_pi300-10000_cl_pass0_src15.ximg exists
[Wed May 23 07:29:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504320201_pi300-10000_cl_pass0_src15.csv
[Wed May 23 07:29:06 2012] fullrun_pn_xmm0504320201_pi300-10000_cl_pass0_src15_1.ximg exists
[Wed May 23 07:29:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504320201_pi300-10000_cl_pass0_src15.csv
[Wed May 23 07:29:06 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0504320201_pi300-10000_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0504320201_pi300-10000_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 23 07:29:06 2012] fullrun_pn_xmm0504320201_pi300-10000_cl_pass0_tfrozen_src15.ximg exists
[Wed May 23 07:29:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504320201_pi300-10000_cl_pass0_tfrozen_src15.csv
[Wed May 23 07:29:06 2012] fullrun_pn_xmm0504320201_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists
[Wed May 23 07:29:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504320201_pi300-10000_cl_pass0_tfrozen_src15.csv
[Wed May 23 07:29:06 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0504320201_pi300-10000_cl_pass0_tfrozen_src15_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0504320201_pi300-10000_cl_pass0_tfrozen_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 23 09:33:25 2012] Warning, spatial fit 15 centroid is now closest to src. 41
[Wed May 23 09:33:25 2012] Vigneting correction estimate = 1.000000
[Wed May 23 09:33:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 23 09:33:25 2012] Assessing source extent using major
[Wed May 23 09:33:25 2012] Source does appear to be extended
[Wed May 23 09:33:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 23 09:33:25 2012] Source is confused with source 19
[Wed May 23 09:33:57 2012] Using EEF radius (= 8.40 ")to estimate initial spatial extent for simple fitting
[Wed May 23 09:33:57 2012] Initial guess for spatial extent in simple fitting = 8.40"
[Wed May 23 09:33:57 2012] source mask rpix=1.9, npix_max = 23, mask sum = 20, frac = 0.847
[Wed May 23 09:33:57 2012] Giving source the simple spatial ID 13 for pass 1, mean size = 8.40"
[Wed May 23 11:59:19 2012] fullrun_pn_xmm0504320201_pi300-10000_cl_pass1_src13.ximg exists
[Wed May 23 11:59:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504320201_pi300-10000_cl_pass1_src13.csv
[Wed May 23 11:59:19 2012] fullrun_pn_xmm0504320201_pi300-10000_cl_pass1_src13_1.ximg exists
[Wed May 23 11:59:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504320201_pi300-10000_cl_pass1_src13.csv
[Wed May 23 11:59:19 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0504320201_pi300-10000_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0504320201_pi300-10000_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 23 11:59:20 2012] fullrun_pn_xmm0504320201_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Wed May 23 11:59:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504320201_pi300-10000_cl_pass1_tfrozen_src13.csv
[Wed May 23 11:59:20 2012] fullrun_pn_xmm0504320201_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Wed May 23 11:59:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504320201_pi300-10000_cl_pass1_tfrozen_src13.csv
[Wed May 23 11:59:20 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0504320201_pi300-10000_cl_pass1_tfrozen_src13_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0504320201_pi300-10000_cl_pass1_tfrozen_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 23 14:07:18 2012] Source 16 is offset by -0.858511 and 2.447893 pixels which is larger than
2 X fitted extent = 1.095310 x 1.095310, not incorporating fit results
[Wed May 23 14:07:18 2012] Spatial fit model total counts = 5368.170000, observed total counts = 4548.000000
[Wed May 23 14:07:18 2012] Poor agreement between spatial fit and data for source 16
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed May 23 14:07:18 2012] Spatial fit model total counts = 4771.670000, observed total counts = 3971.000000
[Wed May 23 14:07:18 2012] Poor agreement between spatial fit and data for source 16
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed May 23 14:07:19 2012] Vigneting correction estimate = 1.000000
[Wed May 23 14:07:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 23 14:07:19 2012] Assessing source extent using major
[Wed May 23 14:07:19 2012] Source does appear to be extended
[Wed May 23 14:07:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 23 14:07:48 2012] XMMSAS src. selection expression = ellipse(22072.565567, 28658.300690, 652.500000, 652.500000, 0.000000, X, Y)
[Wed May 23 14:07:48 2012] Writing source region out to fullrun_pn_xmm0504320201_pi300-10000_pass1_cl_src16_src.reg
[Wed May 23 14:07:48 2012] Extracting stamp from image fullrun_pn_xmm0504320201_pi300-10000_cl_sm2.00.img.gz, (217, 292) - (292, 367)
[Wed May 23 14:07:48 2012] XMMSAS bgd. selection expression = annulus(22072.565567, 28658.300690, 1087.500000, 2175.000000, X, Y) && !ellipse(23464.864000, 27070.118200, 1171.192034, 1171.192034, 0.000000, X, Y) && !ellipse(22860.800400, 25752.964000, 1234.440036, 1234.440036, 0.000000, X, Y) && !ellipse(24411.119580, 30324.241400, 631.434418, 631.434418, 0.000000, X, Y) && !ellipse(22910.794540, 29004.314400, 685.252020, 685.252020, 0.000000, X, Y) && !ellipse(22893.693115, 28571.486542, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21748.560394, 28231.000275, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23873.640533, 28048.533386, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21117.517014, 27284.909790, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24601.867279, 26494.786346, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22759.430939, 30042.901123, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21702.940000, 30032.290200, 1385.848040, 1385.848040, 0.000000, X, Y) && !ellipse(23982.042725, 29781.170990, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22928.798200, 29200.488000, 1296.784037, 1296.784037, 0.000000, X, Y) && !ellipse(22212.660843, 29524.283630, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23662.940000, 29263.094000, 1316.720038, 1316.720038, 0.000000, X, Y) && !ellipse(24135.383942, 29178.731567, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23351.717529, 28836.957611, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24706.215240, 27876.625549, 870.000000, 870.000000, 0.000000, X, Y)
[Wed May 23 14:07:48 2012] Writing fullrun_pn_xmm0504320201_pi300-10000_pass1_cl_src16.gif
[Wed May 23 14:21:20 2012] Mean detx,y = (2579.09, 4336.91) 
[Wed May 23 14:21:25 2012] Setting backscal keywords in source and bgd. spectrum
[Wed May 23 14:21:56 2012] Binned source spectrum to 10 counts/bin
[Wed May 23 14:21:57 2012] Setting source spectrum file to fullrun_pn_xmm0504320201_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Wed May 23 14:21:57 2012] Setting bgd. spectrum file to fullrun_pn_xmm0504320201_pi300-10000_pass1_cl_src16_bgd.pi.gz
[Wed May 23 15:31:32 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed May 23 15:31:32 2012] rmf not generated due to insufficient counts
[Wed May 23 18:28:20 2012] Updating aperture counts using extracted products
[Wed May 23 18:28:20 2012] Error reading totcts from fullrun_pn_xmm0504320201_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Wed May 23 18:28:22 2012] Calculating source flux in energy range 0.30-8.00
[Wed May 23 18:28:22 2012] Using photon index=1.80, rate=0.00746, arf fullrun_pn_xmm0504320201_pi300-10000_pass1_cl_src16.arf
[Wed May 23 18:28:22 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 23 18:28:22 2012] Updating source flux to 2.4e-14
[Wed May 23 18:32:27 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting