[Wed May 23 04:19:08 2012] Detection parameters:
  Position = (281.6, 349.0) = 7 21 21.31 55 48 39.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 299.1 +/- 32.7
  Background counts = 369.8
  Rate = 0.01 +/- 0.001

[Wed May 23 04:19:10 2012] Off-axis axis estimate = 3.86'
[Wed May 23 04:26:29 2012] Using EEF radius (= 8.36 ")to estimate initial spatial extent for simple fitting
[Wed May 23 04:26:29 2012] Initial guess for spatial extent in simple fitting = 8.36"
[Wed May 23 04:26:29 2012] source mask rpix=1.9, npix_max = 23, mask sum = 20, frac = 0.853
[Wed May 23 04:26:29 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 8.36"
[Wed May 23 07:29:05 2012] fullrun_pn_xmm0504320201_pi300-10000_cl_pass0_src11.ximg exists
[Wed May 23 07:29:05 2012] fullrun_pn_xmm0504320201_pi300-10000_cl_pass0_src11_1.ximg exists
[Wed May 23 07:29:05 2012] Fit fullrun_pn_xmm0504320201_pi300-10000_cl_pass0_src11 appears to have run properly
[Wed May 23 07:29:06 2012] fullrun_pn_xmm0504320201_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Wed May 23 07:29:06 2012] fullrun_pn_xmm0504320201_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Wed May 23 07:29:06 2012] Fit fullrun_pn_xmm0504320201_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly
[Wed May 23 09:33:25 2012] Spatial fit model total counts = 4039.950000, observed total counts = 4038.000000
[Wed May 23 09:33:25 2012] Offset between fit and detection position for source 12 = 0.461127 pixels
[Wed May 23 09:33:25 2012] 3936.985000 total counts/ 3714.450000 bgd. counts: snr = 3.651330
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 0.461127 pixels
  Position = (281.2, 349.1) = 7 21 21.54 55 48 40.6
  Extent = 7.7 (2.8-11.0)", rotation angle = 0
  Source counts = 222.5 +/- 62.7
  Background counts = 3714.4
  Rate = 0.008 +/- 0.002
[Wed May 23 09:33:25 2012] Vigneting correction estimate = 1.000000
[Wed May 23 09:33:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 23 09:33:25 2012] Assessing source extent using major axis lower bound
[Wed May 23 09:33:25 2012] Source does appear to be extended
[Wed May 23 09:33:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 23 09:33:57 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed May 23 09:33:57 2012] Initial guess for spatial extent in simple fitting = 7.66"
[Wed May 23 09:33:57 2012] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.782
[Wed May 23 09:33:57 2012] Giving source the simple spatial ID 9 for pass 1, mean size = 7.66"
[Wed May 23 11:59:19 2012] fullrun_pn_xmm0504320201_pi300-10000_cl_pass1_src9.ximg exists
[Wed May 23 11:59:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504320201_pi300-10000_cl_pass1_src9.csv
[Wed May 23 11:59:19 2012] fullrun_pn_xmm0504320201_pi300-10000_cl_pass1_src9_1.ximg exists
[Wed May 23 11:59:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504320201_pi300-10000_cl_pass1_src9.csv
[Wed May 23 11:59:19 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0504320201_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0504320201_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 23 11:59:20 2012] fullrun_pn_xmm0504320201_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Wed May 23 11:59:20 2012] fullrun_pn_xmm0504320201_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Wed May 23 11:59:20 2012] Fit fullrun_pn_xmm0504320201_pi300-10000_cl_pass1_tfrozen_src9 appears to have run properly
[Wed May 23 14:07:18 2012] Spatial fit model total counts = 4037.830000, observed total counts = 4038.000000
[Wed May 23 14:07:18 2012] Offset between fit and detection position for source 12 = 0.031376 pixels
[Wed May 23 14:07:18 2012] 3934.310000 total counts/ 3703.440000 bgd. counts: snr = 3.793716
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 0.031376 pixels
  Position = (281.1, 349.1) = 7 21 21.55 55 48 40.7
  Extent = 7.9 (4.8-11.0)", rotation angle = 0
  Source counts = 230.9 +/- 62.7
  Background counts = 3703.4
  Rate = 0.008 +/- 0.002
[Wed May 23 14:07:19 2012] Vigneting correction estimate = 1.000000
[Wed May 23 14:07:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 23 14:07:19 2012] Assessing source extent using major axis lower bound
[Wed May 23 14:07:19 2012] Source does appear to be extended
[Wed May 23 14:07:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 23 14:07:48 2012] XMMSAS src. selection expression = ellipse(24411.119580, 30324.241400, 473.575814, 473.575814, 0.000000, X, Y)
[Wed May 23 14:07:48 2012] Writing source region out to fullrun_pn_xmm0504320201_pi300-10000_pass1_cl_src12_src.reg
[Wed May 23 14:07:48 2012] Extracting stamp from image fullrun_pn_xmm0504320201_pi300-10000_cl_sm2.00.img.gz, (254, 322) - (308, 376)
[Wed May 23 14:07:48 2012] XMMSAS bgd. selection expression = annulus(24411.119580, 30324.241400, 789.293023, 1578.586045, X, Y) && !ellipse(26791.039825, 30880.488525, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22910.794540, 29004.314400, 685.252020, 685.252020, 0.000000, X, Y) && !ellipse(22072.565567, 28658.300690, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22893.693115, 28571.486542, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23873.640533, 28048.533386, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22759.430939, 30042.901123, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21702.940000, 30032.290200, 1385.848040, 1385.848040, 0.000000, X, Y) && !ellipse(23982.042725, 29781.170990, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22928.798200, 29200.488000, 1296.784037, 1296.784037, 0.000000, X, Y) && !ellipse(22212.660843, 29524.283630, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23662.940000, 29263.094000, 1316.720038, 1316.720038, 0.000000, X, Y) && !ellipse(24135.383942, 29178.731567, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23351.717529, 28836.957611, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24706.215240, 27876.625549, 870.000000, 870.000000, 0.000000, X, Y)
[Wed May 23 14:07:48 2012] Writing fullrun_pn_xmm0504320201_pi300-10000_pass1_cl_src12.gif
[Wed May 23 14:17:39 2012] Mean detx,y = (278.73, 5927.15) 
[Wed May 23 14:17:44 2012] Setting backscal keywords in source and bgd. spectrum
[Wed May 23 14:18:03 2012] Binned source spectrum to 10 counts/bin
[Wed May 23 14:18:04 2012] Setting source spectrum file to fullrun_pn_xmm0504320201_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Wed May 23 14:18:04 2012] Setting bgd. spectrum file to fullrun_pn_xmm0504320201_pi300-10000_pass1_cl_src12_bgd.pi.gz
[Wed May 23 18:28:20 2012] Updating aperture counts using extracted products
[Wed May 23 18:28:20 2012] Error reading totcts from fullrun_pn_xmm0504320201_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Wed May 23 18:28:22 2012] Calculating source flux in energy range 0.30-8.00
[Wed May 23 18:28:22 2012] Using photon index=1.80, rate=0.00809, arf fullrun_pn_xmm0504320201_pi300-10000_pass1_cl_src12.arf
[Wed May 23 18:28:22 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 23 18:28:22 2012] Updating source flux to 2.8e-14