[Wed May 23 04:20:33 2012] Detection parameters:
  Position = (281.0, 348.8) = 7 21 21.61 55 48 40.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 154.5 +/- 24.6
  Background counts = 241.5
  Rate = 0.004 +/- 0.0007

[Wed May 23 04:20:34 2012] Off-axis axis estimate = 3.86'
[Wed May 23 08:16:11 2012] Using EEF radius (= 8.36 ")to estimate initial spatial extent for simple fitting
[Wed May 23 08:16:11 2012] Initial guess for spatial extent in simple fitting = 8.36"
[Wed May 23 08:16:11 2012] source mask rpix=1.9, npix_max = 23, mask sum = 20, frac = 0.852
[Wed May 23 08:16:11 2012] Giving source the simple spatial ID 10 for pass 0, mean size = 8.36"
[Wed May 23 09:33:07 2012] fullrun_mos2_xmm0504320201_pi300-10000_cl_pass0_src10.ximg exists
[Wed May 23 09:33:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504320201_pi300-10000_cl_pass0_src10.csv
[Wed May 23 09:33:07 2012] fullrun_mos2_xmm0504320201_pi300-10000_cl_pass0_src10_1.ximg exists
[Wed May 23 09:33:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504320201_pi300-10000_cl_pass0_src10.csv
[Wed May 23 09:33:07 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504320201_pi300-10000_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504320201_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 23 09:33:08 2012] fullrun_mos2_xmm0504320201_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Wed May 23 09:33:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504320201_pi300-10000_cl_pass0_tfrozen_src10.csv
[Wed May 23 09:33:08 2012] fullrun_mos2_xmm0504320201_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Wed May 23 09:33:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504320201_pi300-10000_cl_pass0_tfrozen_src10.csv
[Wed May 23 09:33:08 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504320201_pi300-10000_cl_pass0_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504320201_pi300-10000_cl_pass0_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 23 09:33:38 2012] Warning: source 10 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 8 at 11.722057 pixels away
[Wed May 23 09:33:38 2012] Vigneting correction estimate = 1.000000
[Wed May 23 09:33:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 23 09:33:38 2012] Assessing source extent using major
[Wed May 23 09:33:38 2012] Source does appear to be extended
[Wed May 23 09:33:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 23 13:04:12 2012] Using EEF radius (= 8.36 ")to estimate initial spatial extent for simple fitting
[Wed May 23 13:04:12 2012] Initial guess for spatial extent in simple fitting = 8.36"
[Wed May 23 13:04:12 2012] source mask rpix=1.9, npix_max = 23, mask sum = 20, frac = 0.852
[Wed May 23 13:04:12 2012] Giving source the simple spatial ID 10 for pass 1, mean size = 8.36"
[Wed May 23 14:07:04 2012] fullrun_mos2_xmm0504320201_pi300-10000_cl_pass1_src10.ximg exists
[Wed May 23 14:07:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504320201_pi300-10000_cl_pass1_src10.csv
[Wed May 23 14:07:04 2012] fullrun_mos2_xmm0504320201_pi300-10000_cl_pass1_src10_1.ximg exists
[Wed May 23 14:07:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504320201_pi300-10000_cl_pass1_src10.csv
[Wed May 23 14:07:04 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504320201_pi300-10000_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504320201_pi300-10000_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 23 14:07:04 2012] fullrun_mos2_xmm0504320201_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Wed May 23 14:07:04 2012] fullrun_mos2_xmm0504320201_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Wed May 23 14:07:04 2012] Fit fullrun_mos2_xmm0504320201_pi300-10000_cl_pass1_tfrozen_src10 appears to have run properly
[Wed May 23 14:07:32 2012] Spatial fit model total counts = 1309.740000, observed total counts = 1233.000000
[Wed May 23 14:07:32 2012] Offset between fit and detection position for source 8 = 0.277873 pixels
[Wed May 23 14:07:32 2012] 1268.378000 total counts/ 1096.300000 bgd. counts: snr = 5.197095
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 0.277873 pixels
  Position = (281.1, 349.1) = 7 21 21.56 55 48 40.5
  Extent = 9.7 (5.4-14.2)", rotation angle = 0
  Source counts = 172.1 +/- 35.6
  Background counts = 1096.3
  Rate = 0.005 +/- 0.001
[Wed May 23 14:07:32 2012] Vigneting correction estimate = 1.000000
[Wed May 23 14:07:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 23 14:07:32 2012] Assessing source extent using major axis lower bound
[Wed May 23 14:07:32 2012] Source does appear to be extended
[Wed May 23 14:07:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 23 17:41:35 2012] XMMSAS src. selection expression = ellipse(24410.567100, 30320.327000, 580.705270, 580.705270, 0.000000, X, Y)
[Wed May 23 17:41:35 2012] Writing source region out to fullrun_mos2_xmm0504320201_pi300-10000_pass1_cl_src8_src.reg
[Wed May 23 17:41:35 2012] Extracting stamp from image fullrun_mos2_xmm0504320201_pi300-10000_cl_sm2.00.img.gz, (248, 316) - (315, 382)
[Wed May 23 17:41:35 2012] XMMSAS bgd. selection expression = annulus(24410.567100, 30320.327000, 967.842117, 1935.684235, X, Y) && !ellipse(24181.852264, 27661.422150, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23419.492462, 28126.909851, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22024.549362, 28135.435150, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24464.042053, 28261.363190, 870.000000, 870.000000, 0.000000, X, Y)
[Wed May 23 17:41:35 2012] Writing fullrun_mos2_xmm0504320201_pi300-10000_pass1_cl_src8.gif
[Wed May 23 17:46:26 2012] Mean detx,y = (-184.44, -6035.74) 
[Wed May 23 17:46:28 2012] Setting backscal keywords in source and bgd. spectrum
[Wed May 23 17:47:08 2012] Binned source spectrum to 10 counts/bin
[Wed May 23 17:47:08 2012] Setting source spectrum file to fullrun_mos2_xmm0504320201_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Wed May 23 17:47:08 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0504320201_pi300-10000_pass1_cl_src8_bgd.pi.gz
[Wed May 23 18:28:28 2012] Updating aperture counts using extracted products
[Wed May 23 18:28:28 2012] Error reading totcts from fullrun_mos2_xmm0504320201_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Wed May 23 18:28:29 2012] Calculating source flux in energy range 0.30-8.00
[Wed May 23 18:28:29 2012] Using photon index=1.80, rate=0.00525, arf fullrun_mos2_xmm0504320201_pi300-10000_pass1_cl_src8.arf
[Wed May 23 18:28:29 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 23 18:28:29 2012] Updating source flux to 6.6e-14