[Wed May 23 04:20:34 2012] Detection parameters:
  Position = (274.3, 293.1) = 7 21 25.09 55 44 36.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 219.6 +/- 29.9
  Background counts = 276.9
  Rate = 0.005 +/- 0.0007

[Wed May 23 04:20:34 2012] Off-axis axis estimate = 1.79'
[Wed May 23 08:16:11 2012] Using EEF radius (= 7.33 ")to estimate initial spatial extent for simple fitting
[Wed May 23 08:16:11 2012] Initial guess for spatial extent in simple fitting = 7.33"
[Wed May 23 08:16:11 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.838
[Wed May 23 08:16:11 2012] Giving source the simple spatial ID 6 for pass 0, mean size = 7.33"
[Wed May 23 09:33:07 2012] fullrun_mos2_xmm0504320201_pi300-10000_cl_pass0_src6.ximg exists
[Wed May 23 09:33:07 2012] fullrun_mos2_xmm0504320201_pi300-10000_cl_pass0_src6_1.ximg exists
[Wed May 23 09:33:07 2012] Fit fullrun_mos2_xmm0504320201_pi300-10000_cl_pass0_src6 appears to have run properly
[Wed May 23 09:33:08 2012] fullrun_mos2_xmm0504320201_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Wed May 23 09:33:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504320201_pi300-10000_cl_pass0_tfrozen_src6.csv
[Wed May 23 09:33:08 2012] fullrun_mos2_xmm0504320201_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Wed May 23 09:33:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504320201_pi300-10000_cl_pass0_tfrozen_src6.csv
[Wed May 23 09:33:08 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504320201_pi300-10000_cl_pass0_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504320201_pi300-10000_cl_pass0_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 23 09:33:38 2012] Source 22 is offset by -3.558530 and -0.052523 pixels which is larger than
2 X fitted extent = 0.851333 x 0.851333, not incorporating fit results
[Wed May 23 09:33:38 2012] Warning, spatial fit 6 centroid is now closest to src. 4
[Wed May 23 09:33:38 2012] Vigneting correction estimate = 1.000000
[Wed May 23 09:33:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 23 09:33:38 2012] Assessing source extent using major
[Wed May 23 09:33:38 2012] Source does appear to be extended
[Wed May 23 09:33:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 23 09:33:38 2012] Source is confused with source 4
[Wed May 23 13:04:12 2012] Using EEF radius (= 7.33 ")to estimate initial spatial extent for simple fitting
[Wed May 23 13:04:12 2012] Initial guess for spatial extent in simple fitting = 7.33"
[Wed May 23 13:04:12 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.838
[Wed May 23 13:04:12 2012] Giving source the simple spatial ID 6 for pass 1, mean size = 7.33"
[Wed May 23 14:07:03 2012] fullrun_mos2_xmm0504320201_pi300-10000_cl_pass1_src6.ximg exists
[Wed May 23 14:07:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504320201_pi300-10000_cl_pass1_src6.csv
[Wed May 23 14:07:03 2012] fullrun_mos2_xmm0504320201_pi300-10000_cl_pass1_src6_1.ximg exists
[Wed May 23 14:07:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504320201_pi300-10000_cl_pass1_src6.csv
[Wed May 23 14:07:03 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504320201_pi300-10000_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504320201_pi300-10000_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 23 14:07:04 2012] fullrun_mos2_xmm0504320201_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Wed May 23 14:07:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504320201_pi300-10000_cl_pass1_tfrozen_src6.csv
[Wed May 23 14:07:04 2012] fullrun_mos2_xmm0504320201_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Wed May 23 14:07:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504320201_pi300-10000_cl_pass1_tfrozen_src6.csv
[Wed May 23 14:07:04 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504320201_pi300-10000_cl_pass1_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504320201_pi300-10000_cl_pass1_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 23 14:07:32 2012] Spatial fit model total counts = 3926.160000, observed total counts = 3641.000000
[Wed May 23 14:07:32 2012] Offset between fit and detection position for source 22 = 4.020373 pixels
[Wed May 23 14:07:32 2012] Warning, changing simple spatial fit ID from 6 to 3
[Wed May 23 14:07:32 2012] 3925.696000 total counts/ 3787.200000 bgd. counts: snr = 2.250495
Spatial fit parameters:
  Offset between fit and detection position for source 22 = 4.020373 pixels
  Position = (278.2, 292.6) = 7 21 23.04 55 44 34.8
  Extent = 16.2" x 16.2", rotation angle = 337
  Source counts = 138.5 +/- 62.7
  Background counts = 3787.2
  Rate = 0.004 +/- 0.002
[Wed May 23 14:07:32 2012] Source 22 is offset by -2.393379 and -2.043839 pixels which is larger than
2 X fitted extent = 0.953462 x 0.953462, not incorporating fit results
[Wed May 23 14:07:32 2012] Vigneting correction estimate = 1.000000
[Wed May 23 14:07:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 23 14:07:32 2012] Assessing source extent using major
[Wed May 23 14:07:32 2012] Source does appear to be extended
[Wed May 23 14:07:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 23 17:41:34 2012] XMMSAS src. selection expression = ellipse(24157.884000, 25406.294000, 969.954028, 969.954028, 337.140000, X, Y)
[Wed May 23 17:41:34 2012] Writing source region out to fullrun_mos2_xmm0504320201_pi300-10000_pass1_cl_src22_src.reg
[Wed May 23 17:41:34 2012] Extracting stamp from image fullrun_mos2_xmm0504320201_pi300-10000_cl_sm2.00.img.gz, (222, 237) - (334, 348)
[Wed May 23 17:41:34 2012] XMMSAS bgd. selection expression = annulus(24157.884000, 25406.294000, 1616.590047, 3233.180093, X, Y) && !ellipse(22809.394200, 26872.302400, 1235.968036, 1235.968036, 0.000000, X, Y) && !ellipse(22901.733600, 25648.718000, 820.672024, 820.672024, 0.000000, X, Y) && !ellipse(24181.852264, 27661.422150, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23569.185669, 25982.336487, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25971.235809, 21945.390991, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24269.369995, 26384.329163, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23419.492462, 28126.909851, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23766.568512, 24838.353394, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22024.549362, 28135.435150, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24555.109558, 26926.433044, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24464.042053, 28261.363190, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20956.206000, 25836.008000, 1316.584038, 1316.584038, 0.000000, X, Y) && !ellipse(23252.953094, 24530.338135, 870.000000, 870.000000, 0.000000, X, Y)
[Wed May 23 17:41:34 2012] Writing fullrun_mos2_xmm0504320201_pi300-10000_pass1_cl_src22.gif
[Wed May 23 17:44:42 2012] Mean detx,y = (-706.62, -1247.08) 
[Wed May 23 17:44:45 2012] Setting backscal keywords in source and bgd. spectrum
[Wed May 23 17:44:58 2012] Binned source spectrum to 10 counts/bin
[Wed May 23 17:44:58 2012] Setting source spectrum file to fullrun_mos2_xmm0504320201_pi300-10000_pass1_cl_src22_src_b10.pi.gz
[Wed May 23 17:44:58 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0504320201_pi300-10000_pass1_cl_src22_bgd.pi.gz
[Wed May 23 18:28:28 2012] Updating aperture counts using extracted products
[Wed May 23 18:28:28 2012] Error reading totcts from fullrun_mos2_xmm0504320201_pi300-10000_pass1_cl_src22_src_b10.pi.gz
[Wed May 23 18:28:29 2012] Calculating source flux in energy range 0.30-8.00
[Wed May 23 18:28:29 2012] Using photon index=1.80, rate=0.00423, arf fullrun_mos2_xmm0504320201_pi300-10000_pass1_cl_src22.arf
[Wed May 23 18:28:29 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 23 18:28:29 2012] Updating source flux to 6e-14
[Wed May 23 18:30:14 2012] Flag b found in src. 22 procflags, skipping spectral fitting
[Wed May 23 18:30:14 2012] Flag c found in src. 22 procflags, skipping spectral fitting