[Wed May 23 04:20:33 2012] Detection parameters:
  Position = (262.9, 298.0) = 7 21 30.92 55 44 58.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 462.1 +/- 37.9
  Background counts = 279.2
  Rate = 0.01 +/- 0.0009

[Wed May 23 04:20:34 2012] Off-axis axis estimate = 2.57'
[Wed May 23 08:16:11 2012] Using EEF radius (= 7.72 ")to estimate initial spatial extent for simple fitting
[Wed May 23 08:16:11 2012] Initial guess for spatial extent in simple fitting = 7.72"
[Wed May 23 08:16:11 2012] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.774
[Wed May 23 08:16:11 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 7.72"
[Wed May 23 09:33:07 2012] fullrun_mos2_xmm0504320201_pi300-10000_cl_pass0_src2.ximg exists
[Wed May 23 09:33:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504320201_pi300-10000_cl_pass0_src2.csv
[Wed May 23 09:33:07 2012] fullrun_mos2_xmm0504320201_pi300-10000_cl_pass0_src2_1.ximg exists
[Wed May 23 09:33:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504320201_pi300-10000_cl_pass0_src2.csv
[Wed May 23 09:33:07 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504320201_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504320201_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 23 09:33:08 2012] fullrun_mos2_xmm0504320201_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Wed May 23 09:33:08 2012] fullrun_mos2_xmm0504320201_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Wed May 23 09:33:08 2012] Fit fullrun_mos2_xmm0504320201_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Wed May 23 09:33:38 2012] Source 1 is offset by 3.713941 and -7.828556 pixels which is larger than
2 X fitted extent = 1.993462 x 1.993462, not incorporating fit results
[Wed May 23 09:33:38 2012] Vigneting correction estimate = 1.000000
[Wed May 23 09:33:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 23 09:33:38 2012] Assessing source extent using major
[Wed May 23 09:33:38 2012] Source does appear to be extended
[Wed May 23 09:33:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 23 13:04:12 2012] Using EEF radius (= 7.72 ")to estimate initial spatial extent for simple fitting
[Wed May 23 13:04:12 2012] Initial guess for spatial extent in simple fitting = 7.72"
[Wed May 23 13:04:12 2012] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.774
[Wed May 23 13:04:12 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 7.72"
[Wed May 23 14:07:03 2012] fullrun_mos2_xmm0504320201_pi300-10000_cl_pass1_src2.ximg exists
[Wed May 23 14:07:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504320201_pi300-10000_cl_pass1_src2.csv
[Wed May 23 14:07:03 2012] fullrun_mos2_xmm0504320201_pi300-10000_cl_pass1_src2_1.ximg exists
[Wed May 23 14:07:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504320201_pi300-10000_cl_pass1_src2.csv
[Wed May 23 14:07:03 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504320201_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504320201_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 23 14:07:04 2012] fullrun_mos2_xmm0504320201_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Wed May 23 14:07:04 2012] fullrun_mos2_xmm0504320201_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Wed May 23 14:07:04 2012] Fit fullrun_mos2_xmm0504320201_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Wed May 23 14:07:32 2012] Spatial fit model total counts = 3968.360000, observed total counts = 3969.000000
[Wed May 23 14:07:32 2012] Offset between fit and detection position for source 1 = 2.796301 pixels
[Wed May 23 14:07:32 2012] 4032.810000 total counts/ 3873.110000 bgd. counts: snr = 2.566108
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 2.796301 pixels
  Position = (263.8, 295.4) = 7 21 30.48 55 44 46.9
  Extent = 10.3 (6.2-15.4)", rotation angle = 0
  Source counts = 159.7 +/- 63.5
  Background counts = 3873.1
  Rate = 0.005 +/- 0.002
[Wed May 23 14:07:32 2012] Vigneting correction estimate = 1.000000
[Wed May 23 14:07:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 23 14:07:32 2012] Assessing source extent using major axis lower bound
[Wed May 23 14:07:32 2012] Source does appear to be extended
[Wed May 23 14:07:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 23 17:41:34 2012] XMMSAS src. selection expression = ellipse(22901.733600, 25648.718000, 615.504018, 615.504018, 0.000000, X, Y)
[Wed May 23 17:41:34 2012] Writing source region out to fullrun_mos2_xmm0504320201_pi300-10000_pass1_cl_src1_src.reg
[Wed May 23 17:41:34 2012] Extracting stamp from image fullrun_mos2_xmm0504320201_pi300-10000_cl_sm2.00.img.gz, (228, 260) - (299, 331)
[Wed May 23 17:41:34 2012] XMMSAS bgd. selection expression = annulus(22901.733600, 25648.718000, 1025.840030, 2051.680059, X, Y) && !ellipse(22809.394200, 26872.302400, 1235.968036, 1235.968036, 0.000000, X, Y) && !ellipse(24181.852264, 27661.422150, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23569.185669, 25982.336487, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24269.369995, 26384.329163, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24157.884000, 25406.294000, 1293.272037, 1293.272037, 337.140000, X, Y) && !ellipse(23419.492462, 28126.909851, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23766.568512, 24838.353394, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22024.549362, 28135.435150, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24555.109558, 26926.433044, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24464.042053, 28261.363190, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20956.206000, 25836.008000, 1316.584038, 1316.584038, 0.000000, X, Y) && !ellipse(23252.953094, 24530.338135, 870.000000, 870.000000, 0.000000, X, Y)
[Wed May 23 17:41:34 2012] Writing fullrun_mos2_xmm0504320201_pi300-10000_pass1_cl_src1.gif
[Wed May 23 17:42:10 2012] Mean detx,y = (-1821.36, -1500.59) 
[Wed May 23 17:42:12 2012] Setting backscal keywords in source and bgd. spectrum
[Wed May 23 17:42:28 2012] Binned source spectrum to 10 counts/bin
[Wed May 23 17:42:28 2012] Setting source spectrum file to fullrun_mos2_xmm0504320201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed May 23 17:42:28 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0504320201_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Wed May 23 18:28:27 2012] Updating aperture counts using extracted products
[Wed May 23 18:28:27 2012] Error reading totcts from fullrun_mos2_xmm0504320201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed May 23 18:28:28 2012] Calculating source flux in energy range 0.30-8.00
[Wed May 23 18:28:28 2012] Using photon index=1.80, rate=0.00487, arf fullrun_mos2_xmm0504320201_pi300-10000_pass1_cl_src1.arf
[Wed May 23 18:28:28 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 23 18:28:28 2012] Updating source flux to 4.8e-14
[Wed May 23 18:30:14 2012] Flag b found in src. 1 procflags, skipping spectral fitting