[Wed May 23 04:19:48 2012] Detection parameters:
  Position = (265.0, 308.0) = 7 21 29.87 55 45 43.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 696.0 +/- 44.0
  Background counts = 324.6
  Rate = 0.02 +/- 0.001

[Wed May 23 04:19:49 2012] Off-axis axis estimate = 2.52'
[Wed May 23 07:29:07 2012] Using EEF radius (= 7.69 ")to estimate initial spatial extent for simple fitting
[Wed May 23 07:29:07 2012] Initial guess for spatial extent in simple fitting = 7.69"
[Wed May 23 07:29:07 2012] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.778
[Wed May 23 07:29:07 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.69"
[Wed May 23 08:16:11 2012] fullrun_mos1_xmm0504320201_pi300-10000_cl_pass0_src1.ximg exists
[Wed May 23 08:16:11 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0504320201_pi300-10000_cl_pass0_src1.csv
[Wed May 23 08:16:11 2012] fullrun_mos1_xmm0504320201_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed May 23 08:16:11 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0504320201_pi300-10000_cl_pass0_src1.csv
[Wed May 23 08:16:11 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0504320201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0504320201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 23 08:16:11 2012] fullrun_mos1_xmm0504320201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed May 23 08:16:11 2012] fullrun_mos1_xmm0504320201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed May 23 08:16:11 2012] Fit fullrun_mos1_xmm0504320201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Wed May 23 09:33:32 2012] Warning, spatial fit 1 centroid is now closest to src. 5
[Wed May 23 09:33:32 2012] Spatial fit model total counts = 3121.540000, observed total counts = 3144.000000
[Wed May 23 09:33:32 2012] Offset between fit and detection position for source 3 = 6.181814 pixels
[Wed May 23 09:33:32 2012] Warning, changing simple spatial fit ID from 1 to 4
[Wed May 23 09:33:32 2012] 3196.054000 total counts/ 2923.880000 bgd. counts: snr = 5.033463
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 6.181814 pixels
  Position = (261.2, 303.2) = 7 21 31.83 55 45 20.8
  Extent = 12.8 (7.9-16.0)", rotation angle = 0
  Source counts = 272.2 +/- 56.5
  Background counts = 2923.9
  Rate = 0.008 +/- 0.002
[Wed May 23 09:33:32 2012] Vigneting correction estimate = 1.000000
[Wed May 23 09:33:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 23 09:33:32 2012] Assessing source extent using major axis lower bound
[Wed May 23 09:33:32 2012] Source does appear to be extended
[Wed May 23 09:33:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 23 09:33:32 2012] Source is confused with source 13
[Wed May 23 09:33:32 2012] Source is confused with source 10
[Wed May 23 11:59:21 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed May 23 11:59:21 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed May 23 11:59:21 2012] Initial guess for spatial extent in simple fitting = 12.79"
[Wed May 23 11:59:21 2012] source mask rpix=2.9, npix_max = 47, mask sum = 49, frac = 1.035
[Wed May 23 11:59:21 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 12.79"
[Wed May 23 13:04:12 2012] fullrun_mos1_xmm0504320201_pi300-10000_cl_pass1_src1.ximg exists
[Wed May 23 13:04:12 2012] fullrun_mos1_xmm0504320201_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed May 23 13:04:12 2012] Fit fullrun_mos1_xmm0504320201_pi300-10000_cl_pass1_src1 appears to have run properly
[Wed May 23 13:04:12 2012] fullrun_mos1_xmm0504320201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed May 23 13:04:12 2012] fullrun_mos1_xmm0504320201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed May 23 13:04:12 2012] Fit fullrun_mos1_xmm0504320201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Wed May 23 14:07:25 2012] Spatial fit model total counts = 8040.060000, observed total counts = 8041.000000
[Wed May 23 14:07:25 2012] Offset between fit and detection position for source 3 = 3.814900 pixels
[Wed May 23 14:07:25 2012] 8153.050000 total counts/ 6332.240000 bgd. counts: snr = 22.881577
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 3.814900 pixels
  Position = (261.5, 307.0) = 7 21 31.67 55 45 37.3
  Extent = 25.5 (25.5-25.6)", rotation angle = 0
  Source counts = 1820.8 +/- 90.3
  Background counts = 6332.2
  Rate = 0.06 +/- 0.003
[Wed May 23 14:07:25 2012] Vigneting correction estimate = 1.000000
[Wed May 23 14:07:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 23 14:07:25 2012] Assessing source extent using major axis lower bound
[Wed May 23 14:07:25 2012] Source does appear to be extended
[Wed May 23 14:07:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 23 15:58:33 2012] Counts = 1820.810000, rescaling region sizes by 2.000000
[Wed May 23 15:58:33 2012] XMMSAS src. selection expression = ellipse(22702.358000, 26657.606000, 3064.128088, 3064.128088, 0.000000, X, Y)
[Wed May 23 15:58:33 2012] Writing source region out to fullrun_mos1_xmm0504320201_pi300-10000_pass1_cl_src3_src.reg
[Wed May 23 15:58:33 2012] Extracting stamp from image fullrun_mos1_xmm0504320201_pi300-10000_cl_sm2.00.img.gz, (85, 131) - (438, 483)
[Wed May 23 15:58:33 2012] XMMSAS bgd. selection expression = annulus(22702.358000, 26657.606000, 10213.760294, 20427.520588, X, Y) && !ellipse(26718.353088, 30787.793488, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22184.083435, 25971.262360, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25962.829987, 21949.981537, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30225.306946, 15275.318863, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34884.267395, 21541.884949, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22113.066000, 27130.102000, 993.296029, 993.296029, 0.000000, X, Y) && !ellipse(24271.556000, 25947.300000, 1156.720033, 1156.720033, 0.000000, X, Y) && !ellipse(31993.909576, 20568.739716, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23629.420319, 25353.447662, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23822.064000, 28160.621000, 1238.216036, 1238.216036, 0.000000, X, Y) && !ellipse(22844.240540, 25102.000458, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21457.228012, 27549.902954, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14070.872787, 26408.351868, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31848.955597, 27384.130890, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11098.605988, 21054.409622, 870.000000, 870.000000, 0.000000, X, Y)
[Wed May 23 15:58:33 2012] Writing fullrun_mos1_xmm0504320201_pi300-10000_pass1_cl_src3.gif
[Wed May 23 15:58:47 2012] Mean detx,y = (-2346.59, 1637.51) 
[Wed May 23 15:58:51 2012] Setting backscal keywords in source and bgd. spectrum
[Wed May 23 16:10:28 2012] Binned source spectrum to 10 counts/bin
[Wed May 23 16:10:28 2012] Setting source spectrum file to fullrun_mos1_xmm0504320201_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Wed May 23 16:10:28 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0504320201_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Wed May 23 18:28:25 2012] Updating aperture counts using extracted products
[Wed May 23 18:28:25 2012] Error reading totcts from fullrun_mos1_xmm0504320201_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Wed May 23 18:28:26 2012] Calculating source flux in energy range 0.30-8.00
[Wed May 23 18:28:26 2012] Using photon index=1.80, rate=0.0554, arf fullrun_mos1_xmm0504320201_pi300-10000_pass1_cl_src3.arf
[Wed May 23 18:28:26 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 23 18:28:26 2012] Updating source flux to 5e-13
[Wed May 23 18:28:31 2012] Flag c found in src. 3 procflags, skipping spectral fitting
[Wed May 23 18:30:14 2012] Reading fit data from xmm0504320201/analysis//spectral/fullrun_mos1_xmm0504320201_pi300-10000_pass1_cl_src3_pl.csv
[Wed May 23 18:30:14 2012] Spectral fit parameter nH value = 1.41052e+21
[Wed May 23 18:30:14 2012] Spectral fit parameter PhoIndex value = 2.0415
[Wed May 23 18:30:14 2012] Failed to get F(0.3-8.0) from xmm0504320201/analysis//spectral/fullrun_mos1_xmm0504320201_pi300-10000_pass1_cl_src3_pl.csv, possibly due to different flux energy range selected
[Wed May 23 18:30:14 2012] Calculating source flux in energy range 0.30-8.00
[Wed May 23 18:30:14 2012] Using Nh = 1.4e+21, photon index=2.04, rate=0.0554, arf fullrun_mos1_xmm0504320201_pi300-10000_pass1_cl_src3.arf
[Wed May 23 18:30:14 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 23 18:30:14 2012] Updating source flux to 5e-13