[Wed May 23 04:19:49 2012] Detection parameters:
  Position = (307.7, 354.4) = 7 21 7.86 55 49 8.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 289.7 +/- 23.8
  Background counts = 177.9
  Rate = 0.01 +/- 0.0009

[Wed May 23 04:19:49 2012] Off-axis axis estimate = 4.11'
[Wed May 23 07:29:07 2012] Using EEF radius (= 8.49 ")to estimate initial spatial extent for simple fitting
[Wed May 23 07:29:07 2012] Initial guess for spatial extent in simple fitting = 8.49"
[Wed May 23 07:29:07 2012] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.041
[Wed May 23 07:29:07 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 8.49"
[Wed May 23 08:16:11 2012] fullrun_mos1_xmm0504320201_pi300-10000_cl_pass0_src3.ximg exists
[Wed May 23 08:16:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504320201_pi300-10000_cl_pass0_src3.csv
[Wed May 23 08:16:11 2012] fullrun_mos1_xmm0504320201_pi300-10000_cl_pass0_src3_1.ximg exists
[Wed May 23 08:16:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504320201_pi300-10000_cl_pass0_src3.csv
[Wed May 23 08:16:11 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0504320201_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0504320201_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 23 08:16:11 2012] fullrun_mos1_xmm0504320201_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Wed May 23 08:16:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504320201_pi300-10000_cl_pass0_tfrozen_src3.csv
[Wed May 23 08:16:11 2012] fullrun_mos1_xmm0504320201_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Wed May 23 08:16:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504320201_pi300-10000_cl_pass0_tfrozen_src3.csv
[Wed May 23 08:16:11 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0504320201_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0504320201_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 23 09:33:32 2012] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 23 at 11.149092 pixels away
[Wed May 23 09:33:32 2012] Vigneting correction estimate = 1.000000
[Wed May 23 09:33:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 23 09:33:32 2012] Assessing source extent using major
[Wed May 23 09:33:32 2012] Source does appear to be extended
[Wed May 23 09:33:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 23 11:59:21 2012] Using EEF radius (= 8.49 ")to estimate initial spatial extent for simple fitting
[Wed May 23 11:59:21 2012] Initial guess for spatial extent in simple fitting = 8.49"
[Wed May 23 11:59:21 2012] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.041
[Wed May 23 11:59:21 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 8.49"
[Wed May 23 13:04:12 2012] fullrun_mos1_xmm0504320201_pi300-10000_cl_pass1_src3.ximg exists
[Wed May 23 13:04:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504320201_pi300-10000_cl_pass1_src3.csv
[Wed May 23 13:04:12 2012] fullrun_mos1_xmm0504320201_pi300-10000_cl_pass1_src3_1.ximg exists
[Wed May 23 13:04:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504320201_pi300-10000_cl_pass1_src3.csv
[Wed May 23 13:04:12 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0504320201_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0504320201_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 23 13:04:12 2012] fullrun_mos1_xmm0504320201_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Wed May 23 13:04:12 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0504320201_pi300-10000_cl_pass1_tfrozen_src3.csv
[Wed May 23 13:04:12 2012] fullrun_mos1_xmm0504320201_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Wed May 23 13:04:12 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0504320201_pi300-10000_cl_pass1_tfrozen_src3.csv
[Wed May 23 13:04:12 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0504320201_pi300-10000_cl_pass1_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0504320201_pi300-10000_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 23 14:07:25 2012] Spatial fit model total counts = -740.417000, observed total counts = 683.000000
[Wed May 23 14:07:25 2012] Poor agreement between spatial fit and data for source 23
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed May 23 14:07:25 2012] Vigneting correction estimate = 1.000000
[Wed May 23 14:07:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 23 14:07:25 2012] Assessing source extent using major
[Wed May 23 14:07:25 2012] Source does appear to be extended
[Wed May 23 14:07:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 23 15:58:33 2012] XMMSAS src. selection expression = ellipse(26718.353088, 30787.793488, 652.500000, 652.500000, 0.000000, X, Y)
[Wed May 23 15:58:33 2012] Writing source region out to fullrun_mos1_xmm0504320201_pi300-10000_pass1_cl_src23_src.reg
[Wed May 23 15:58:33 2012] Extracting stamp from image fullrun_mos1_xmm0504320201_pi300-10000_cl_sm2.00.img.gz, (270, 317) - (345, 392)
[Wed May 23 15:58:33 2012] XMMSAS bgd. selection expression = annulus(26718.353088, 30787.793488, 1087.500000, 2175.000000, X, Y) && !ellipse(22702.358000, 26657.606000, 2042.752059, 2042.752059, 0.000000, X, Y) && !ellipse(23822.064000, 28160.621000, 1238.216036, 1238.216036, 0.000000, X, Y)
[Wed May 23 15:58:33 2012] Writing fullrun_mos1_xmm0504320201_pi300-10000_pass1_cl_src23.gif
[Wed May 23 16:10:36 2012] Mean detx,y = (-6150.56, -2332.69) 
[Wed May 23 16:10:38 2012] Setting backscal keywords in source and bgd. spectrum
[Wed May 23 16:10:57 2012] Binned source spectrum to 10 counts/bin
[Wed May 23 16:10:58 2012] Setting source spectrum file to fullrun_mos1_xmm0504320201_pi300-10000_pass1_cl_src23_src_b10.pi.gz
[Wed May 23 16:10:58 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0504320201_pi300-10000_pass1_cl_src23_bgd.pi.gz
[Wed May 23 17:24:51 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed May 23 17:24:51 2012] rmf not generated due to insufficient counts
[Wed May 23 18:28:25 2012] Updating aperture counts using extracted products
[Wed May 23 18:28:25 2012] Error reading totcts from fullrun_mos1_xmm0504320201_pi300-10000_pass1_cl_src23_src_b10.pi.gz
[Wed May 23 18:28:26 2012] Calculating source flux in energy range 0.30-8.00
[Wed May 23 18:28:26 2012] Using photon index=1.80, rate=0.0107, arf fullrun_mos1_xmm0504320201_pi300-10000_pass1_cl_src23.arf
[Wed May 23 18:28:26 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 23 18:28:26 2012] Updating source flux to 1.7e-13
[Wed May 23 18:28:31 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting