[Tue May  8 09:25:44 2012] Detection parameters:
  Position = (271.2, 270.0) = 9 18 14.03 -12 9 26.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 292.7 +/- 44.5
  Background counts = 888.6
  Rate = 0.004 +/- 0.0006

[Tue May  8 09:25:48 2012] Off-axis axis estimate = 2.85'
[Tue May  8 09:53:52 2012] Using EEF radius (= 7.85 ")to estimate initial spatial extent for simple fitting
[Tue May  8 09:53:52 2012] Initial guess for spatial extent in simple fitting = 7.85"
[Tue May  8 09:53:52 2012] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.940
[Tue May  8 09:53:52 2012] Giving source the simple spatial ID 62 for pass 0, mean size = 7.85"
[Tue May  8 23:48:24 2012] fullrun_pn_xmm0504260101_pi300-10000_cl_pass0_src62.ximg exists
[Tue May  8 23:48:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504260101_pi300-10000_cl_pass0_src62.csv
[Tue May  8 23:48:24 2012] fullrun_pn_xmm0504260101_pi300-10000_cl_pass0_src62_1.ximg exists
[Tue May  8 23:48:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504260101_pi300-10000_cl_pass0_src62.csv
[Tue May  8 23:48:24 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0504260101_pi300-10000_cl_pass0_src62_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0504260101_pi300-10000_cl_pass0_src62.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May  8 23:48:26 2012] fullrun_pn_xmm0504260101_pi300-10000_cl_pass0_tfrozen_src62.ximg exists
[Tue May  8 23:48:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504260101_pi300-10000_cl_pass0_tfrozen_src62.csv
[Tue May  8 23:48:26 2012] fullrun_pn_xmm0504260101_pi300-10000_cl_pass0_tfrozen_src62_1.ximg exists
[Tue May  8 23:48:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504260101_pi300-10000_cl_pass0_tfrozen_src62.csv
[Tue May  8 23:48:26 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0504260101_pi300-10000_cl_pass0_tfrozen_src62_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0504260101_pi300-10000_cl_pass0_tfrozen_src62.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 10 09:28:51 2012] Source 66 is offset by 7.127481 and 6.262660 pixels which is larger than
2 X fitted extent = 1.104598 x 1.104598, not incorporating fit results
[Thu May 10 09:28:51 2012] Vigneting correction estimate = 1.000000
[Thu May 10 09:28:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 10 09:28:51 2012] Assessing source extent using major
[Thu May 10 09:28:51 2012] Source does appear to be extended
[Thu May 10 09:28:51 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 10 09:30:23 2012] Using EEF radius (= 7.85 ")to estimate initial spatial extent for simple fitting
[Thu May 10 09:30:23 2012] Initial guess for spatial extent in simple fitting = 7.85"
[Thu May 10 09:30:23 2012] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.940
[Thu May 10 09:30:23 2012] Giving source the simple spatial ID 54 for pass 1, mean size = 7.85"
[Thu May 10 21:17:44 2012] fullrun_pn_xmm0504260101_pi300-10000_cl_pass1_src54.ximg exists
[Thu May 10 21:17:44 2012] fullrun_pn_xmm0504260101_pi300-10000_cl_pass1_src54_1.ximg exists
[Thu May 10 21:17:44 2012] Fit fullrun_pn_xmm0504260101_pi300-10000_cl_pass1_src54 appears to have run properly
[Thu May 10 21:17:45 2012] fullrun_pn_xmm0504260101_pi300-10000_cl_pass1_tfrozen_src54.ximg exists
[Thu May 10 21:17:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504260101_pi300-10000_cl_pass1_tfrozen_src54.csv
[Thu May 10 21:17:45 2012] fullrun_pn_xmm0504260101_pi300-10000_cl_pass1_tfrozen_src54_1.ximg exists
[Thu May 10 21:17:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504260101_pi300-10000_cl_pass1_tfrozen_src54.csv
[Thu May 10 21:17:45 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0504260101_pi300-10000_cl_pass1_tfrozen_src54_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0504260101_pi300-10000_cl_pass1_tfrozen_src54.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 12 02:47:15 2012] Spatial fit model total counts = 6988.030000, observed total counts = 6722.000000
[Sat May 12 02:47:15 2012] Offset between fit and detection position for source 66 = 8.007199 pixels
[Sat May 12 02:47:15 2012] 9212.800000 total counts/ 1218.120000 bgd. counts: snr = 229.063582
Spatial fit parameters:
  Offset between fit and detection position for source 66 = 8.007199 pixels
  Position = (264.2, 266.2) = 9 18 16.11 -12 9 44.0
  Extent = 15.7 (15.7-31.4)" x 14.5 (14.5-14.5)", rotation angle = 359 (359-359) degrees
  Source counts = 7994.7 +/- 96.0
  Background counts = 1218.1
  Rate = 0.1 +/- 0.001
[Sat May 12 02:47:16 2012] Vigneting correction estimate = 1.000000
[Sat May 12 02:47:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 12 02:47:16 2012] Assessing source extent using major axis lower bound
[Sat May 12 02:47:16 2012] Source does appear to be extended
[Sat May 12 02:47:16 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.08
[Sat May 12 02:47:16 2012] Source is confused with source 64
[Sat May 12 02:48:11 2012] Counts = 7994.680000, rescaling region sizes by 2.000000
[Sat May 12 02:48:11 2012] XMMSAS src. selection expression = ellipse(22936.616000, 23106.816000, 1885.188054, 1741.284050, 359.006000, X, Y)
[Sat May 12 02:48:11 2012] Writing source region out to fullrun_pn_xmm0504260101_pi300-10000_pass1_cl_src66_src.reg
[Sat May 12 02:48:11 2012] Extracting stamp from image fullrun_pn_xmm0504260101_pi300-10000_cl_sm2.00.img.gz, (156, 158) - (373, 374)
[Sat May 12 02:48:11 2012] XMMSAS bgd. selection expression = annulus(22936.616000, 23106.816000, 6283.960181, 12567.920362, X, Y) && !ellipse(25939.592600, 27946.472200, 6797.280196, 6797.280196, 0.000000, X, Y) && !ellipse(24697.648000, 29304.656000, 3714.120107, 3714.120107, -0.000000, X, Y) && !ellipse(25916.682922, 29596.718140, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25882.584381, 11768.763260, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24002.849970, 26060.946625, 1244.616036, 719.156009, 248.183455, X, Y) && !ellipse(22700.906128, 25505.631287, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24344.900269, 25430.363861, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24792.769196, 24905.183136, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29552.692444, 22024.679459, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35006.157135, 20346.799179, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24905.424744, 34269.994507, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36319.924042, 35583.891510, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26087.061462, 34100.760284, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25987.431488, 33733.102448, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12801.880295, 33858.879150, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24877.052000, 33266.998000, 1467.992042, 1467.992042, 0.000000, X, Y) && !ellipse(27602.414124, 33260.870972, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27538.762600, 32779.686000, 1531.008044, 1531.008044, 0.000000, X, Y) && !ellipse(25659.992035, 32885.343628, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25879.226000, 31857.436000, 1467.992042, 1467.992042, 0.000000, X, Y) && !ellipse(20806.870621, 31950.138763, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27258.420563, 31890.220062, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23618.871887, 31499.274963, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28138.894000, 31356.086000, 1387.168040, 1387.168040, 5.349000, X, Y) && !ellipse(28586.429047, 30578.728516, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23582.076000, 29910.324000, 1142.936033, 1142.936033, 0.000000, X, Y) && !ellipse(21668.174072, 30235.388092, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(9646.699898, 30412.552887, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28844.532410, 30174.866699, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32642.923523, 30118.702209, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16834.127716, 30011.043427, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30705.997345, 29259.534729, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18502.640200, 29257.857000, 409.487212, 409.487212, 0.000000, X, Y) && !ellipse(31742.759735, 28985.389679, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29111.777039, 29818.471497, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13551.785355, 28740.819000, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21620.110077, 28197.995605, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21802.756180, 27359.006348, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22411.505280, 27007.111420, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21496.071091, 26493.790710, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22589.625885, 23971.783691, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25196.902051, 23038.668544, 1256.792036, 1154.752548, 17.692499, X, Y) && !ellipse(24599.568024, 22645.378845, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31688.709400, 19713.166000, 1626.856047, 1626.856047, 0.000000, X, Y) && !ellipse(20693.684940, 18477.884600, 737.588821, 737.588821, 0.000000, X, Y) && !ellipse(10726.737938, 18243.905792, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22669.863525, 18128.280594, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33520.824890, 18147.395477, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17701.699692, 17246.634308, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34082.589264, 17018.891205, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33296.028870, 15852.572678, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18273.666380, 14820.922200, 448.427213, 448.427213, 0.000000, X, Y) && !ellipse(21212.150223, 12640.485046, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24610.607635, 10540.070129, 870.000000, 870.000000, 0.000000, X, Y)
[Sat May 12 02:48:11 2012] Writing fullrun_pn_xmm0504260101_pi300-10000_pass1_cl_src66.gif
[Sat May 12 05:37:15 2012] Mean detx,y = (-4903.23, 1841.17) 
[Sat May 12 05:37:29 2012] Setting backscal keywords in source and bgd. spectrum
[Sat May 12 05:43:53 2012] Binned source spectrum to 10 counts/bin
[Sat May 12 05:43:54 2012] Setting source spectrum file to fullrun_pn_xmm0504260101_pi300-10000_pass1_cl_src66_src_b10.pi.gz
[Sat May 12 05:43:54 2012] Setting bgd. spectrum file to fullrun_pn_xmm0504260101_pi300-10000_pass1_cl_src66_bgd.pi.gz
[Tue May 15 08:09:06 2012] Updating aperture counts using extracted products
[Tue May 15 08:09:06 2012] Error reading totcts from fullrun_pn_xmm0504260101_pi300-10000_pass1_cl_src66_src_b10.pi.gz
[Tue May 15 08:09:09 2012] Calculating source flux in energy range 0.30-8.00
[Tue May 15 08:09:09 2012] Using photon index=1.80, rate=0.0995, arf fullrun_pn_xmm0504260101_pi300-10000_pass1_cl_src66.arf
[Tue May 15 08:09:09 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 15 08:09:09 2012] Updating source flux to 2.8e-13
[Tue May 15 08:18:46 2012] Flag b found in src. 66 procflags, skipping spectral fitting
[Tue May 15 08:18:46 2012] Flag c found in src. 66 procflags, skipping spectral fitting