[Tue May  8 09:25:29 2012] Detection parameters:
  Position = (275.0, 298.9) = 9 18 12.91 -12 7 21.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2493.7 +/- 83.3
  Background counts = 1296.0
  Rate = 0.03 +/- 0.001

[Tue May  8 09:25:48 2012] Off-axis axis estimate = 1.70'
[Tue May  8 09:53:52 2012] Using EEF radius (= 7.28 ")to estimate initial spatial extent for simple fitting
[Tue May  8 09:53:52 2012] Initial guess for spatial extent in simple fitting = 7.28"
[Tue May  8 09:53:52 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.847
[Tue May  8 09:53:52 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 7.28"
[Tue May  8 23:48:23 2012] fullrun_pn_xmm0504260101_pi300-10000_cl_pass0_src5.ximg exists
[Tue May  8 23:48:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504260101_pi300-10000_cl_pass0_src5.csv
[Tue May  8 23:48:23 2012] fullrun_pn_xmm0504260101_pi300-10000_cl_pass0_src5_1.ximg exists
[Tue May  8 23:48:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504260101_pi300-10000_cl_pass0_src5.csv
[Tue May  8 23:48:23 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0504260101_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0504260101_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May  8 23:48:25 2012] fullrun_pn_xmm0504260101_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Tue May  8 23:48:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504260101_pi300-10000_cl_pass0_tfrozen_src5.csv
[Tue May  8 23:48:25 2012] fullrun_pn_xmm0504260101_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Tue May  8 23:48:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504260101_pi300-10000_cl_pass0_tfrozen_src5.csv
[Tue May  8 23:48:25 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0504260101_pi300-10000_cl_pass0_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0504260101_pi300-10000_cl_pass0_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 10 09:28:51 2012] Warning, spatial fit 5 centroid is now closest to src. 7
[Thu May 10 09:28:51 2012] Spatial fit model total counts = 20054.500000, observed total counts = 19273.000000
[Thu May 10 09:28:51 2012] Offset between fit and detection position for source 5 = 1.913205 pixels
[Thu May 10 09:28:51 2012] Warning, changing simple spatial fit ID from 5 to 7
[Thu May 10 09:28:51 2012] 18281.620000 total counts/ 10527.300000 bgd. counts: snr = 75.576229
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 1.913205 pixels
  Position = (276.5, 300.1) = 9 18 12.47 -12 7 16.3
  Extent = 15.6" x 9.0", rotation angle = 248
  Source counts = 7754.3 +/- 135.2
  Background counts = 10527.3
  Rate = 0.1 +/- 0.002
[Thu May 10 09:28:51 2012] Vigneting correction estimate = 1.000000
[Thu May 10 09:28:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 10 09:28:51 2012] Assessing source extent using major
[Thu May 10 09:28:51 2012] Source does appear to be extended
[Thu May 10 09:28:51 2012] Computing asymmetry using major and minor axis, asym = 1.73
[Thu May 10 09:28:51 2012] Source is asymmetric
[Thu May 10 09:28:51 2012] Source is confused with source 7
[Thu May 10 09:30:23 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu May 10 09:30:23 2012] Initial guess for spatial extent in simple fitting = 12.27"
[Thu May 10 09:30:23 2012] source mask rpix=2.8, npix_max = 44, mask sum = 34, frac = 0.770
[Thu May 10 09:30:23 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 12.27"
[Thu May 10 21:17:43 2012] fullrun_pn_xmm0504260101_pi300-10000_cl_pass1_src5.ximg exists
[Thu May 10 21:17:43 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0504260101_pi300-10000_cl_pass1_src5.csv
[Thu May 10 21:17:43 2012] fullrun_pn_xmm0504260101_pi300-10000_cl_pass1_src5_1.ximg exists
[Thu May 10 21:17:43 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0504260101_pi300-10000_cl_pass1_src5.csv
[Thu May 10 21:17:43 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0504260101_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0504260101_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 10 21:17:44 2012] fullrun_pn_xmm0504260101_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Thu May 10 21:17:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504260101_pi300-10000_cl_pass1_tfrozen_src5.csv
[Thu May 10 21:17:44 2012] fullrun_pn_xmm0504260101_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Thu May 10 21:17:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504260101_pi300-10000_cl_pass1_tfrozen_src5.csv
[Thu May 10 21:17:44 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0504260101_pi300-10000_cl_pass1_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0504260101_pi300-10000_cl_pass1_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 12 02:47:15 2012] Warning, spatial fit 5 centroid is now closest to src. 7
[Sat May 12 02:47:15 2012] Vigneting correction estimate = 1.000000
[Sat May 12 02:47:15 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 12 02:47:15 2012] Assessing source extent using major
[Sat May 12 02:47:15 2012] Source does appear to be extended
[Sat May 12 02:47:15 2012] Computing asymmetry using major and minor axis, asym = 1.73
[Sat May 12 02:47:15 2012] Source is asymmetric
[Sat May 12 02:48:08 2012] Counts = 7754.320000, rescaling region sizes by 2.000000
[Sat May 12 02:48:08 2012] XMMSAS src. selection expression = ellipse(24002.849970, 26060.946625, 1866.924054, 1078.734014, 248.183455, X, Y)
[Sat May 12 02:48:08 2012] Writing source region out to fullrun_pn_xmm0504260101_pi300-10000_pass1_cl_src5_src.reg
[Sat May 12 02:48:08 2012] Extracting stamp from image fullrun_pn_xmm0504260101_pi300-10000_cl_sm2.00.img.gz, (169, 193) - (384, 407)
[Sat May 12 02:48:09 2012] XMMSAS bgd. selection expression = annulus(24002.849970, 26060.946625, 6223.080179, 12446.160358, X, Y) && !ellipse(25939.592600, 27946.472200, 6797.280196, 6797.280196, 0.000000, X, Y) && !ellipse(24697.648000, 29304.656000, 3714.120107, 3714.120107, -0.000000, X, Y) && !ellipse(25916.682922, 29596.718140, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22700.906128, 25505.631287, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24344.900269, 25430.363861, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24792.769196, 24905.183136, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29552.692444, 22024.679459, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36490.143280, 21626.750305, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35006.157135, 20346.799179, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24905.424744, 34269.994507, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24244.086151, 39301.548492, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26746.833588, 38821.877625, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12889.732559, 38164.131287, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21658.481888, 37950.924469, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23591.933960, 36638.609863, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36319.924042, 35583.891510, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26087.061462, 34100.760284, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25987.431488, 33733.102448, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12801.880295, 33858.879150, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24877.052000, 33266.998000, 1467.992042, 1467.992042, 0.000000, X, Y) && !ellipse(27602.414124, 33260.870972, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27538.762600, 32779.686000, 1531.008044, 1531.008044, 0.000000, X, Y) && !ellipse(25659.992035, 32885.343628, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25879.226000, 31857.436000, 1467.992042, 1467.992042, 0.000000, X, Y) && !ellipse(20806.870621, 31950.138763, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27258.420563, 31890.220062, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23618.871887, 31499.274963, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28138.894000, 31356.086000, 1387.168040, 1387.168040, 5.349000, X, Y) && !ellipse(28586.429047, 30578.728516, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23582.076000, 29910.324000, 1142.936033, 1142.936033, 0.000000, X, Y) && !ellipse(21668.174072, 30235.388092, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28844.532410, 30174.866699, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32642.923523, 30118.702209, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16834.127716, 30011.043427, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30705.997345, 29259.534729, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18502.640200, 29257.857000, 409.487212, 409.487212, 0.000000, X, Y) && !ellipse(31742.759735, 28985.389679, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29111.777039, 29818.471497, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13551.785355, 28740.819000, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21620.110077, 28197.995605, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21802.756180, 27359.006348, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22411.505280, 27007.111420, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21496.071091, 26493.790710, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22589.625885, 23971.783691, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25196.902051, 23038.668544, 1256.792036, 1154.752548, 17.692499, X, Y) && !ellipse(22936.616000, 23106.816000, 1256.792036, 1160.856033, 359.006000, X, Y) && !ellipse(24599.568024, 22645.378845, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31688.709400, 19713.166000, 1626.856047, 1626.856047, 0.000000, X, Y) && !ellipse(20693.684940, 18477.884600, 737.588821, 737.588821, 0.000000, X, Y) && !ellipse(10726.737938, 18243.905792, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22669.863525, 18128.280594, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33520.824890, 18147.395477, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17701.699692, 17246.634308, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34082.589264, 17018.891205, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33296.028870, 15852.572678, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18273.666380, 14820.922200, 448.427213, 448.427213, 0.000000, X, Y)
[Sat May 12 02:48:09 2012] Writing fullrun_pn_xmm0504260101_pi300-10000_pass1_cl_src5.gif
[Sat May 12 03:23:34 2012] Mean detx,y = (-2010.96, 73.49) 
[Sat May 12 03:23:51 2012] Setting backscal keywords in source and bgd. spectrum
[Sat May 12 03:31:23 2012] Binned source spectrum to 10 counts/bin
[Sat May 12 03:31:24 2012] Setting source spectrum file to fullrun_pn_xmm0504260101_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Sat May 12 03:31:24 2012] Setting bgd. spectrum file to fullrun_pn_xmm0504260101_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Tue May 15 08:09:04 2012] Updating aperture counts using extracted products
[Tue May 15 08:09:04 2012] Error reading totcts from fullrun_pn_xmm0504260101_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Tue May 15 08:09:06 2012] Calculating source flux in energy range 0.30-8.00
[Tue May 15 08:09:06 2012] Using photon index=1.80, rate=0.0965, arf fullrun_pn_xmm0504260101_pi300-10000_pass1_cl_src5.arf
[Tue May 15 08:09:06 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 15 08:09:06 2012] Updating source flux to 2.7e-13
[Tue May 15 08:18:46 2012] Flag c found in src. 5 procflags, skipping spectral fitting