[Tue May  8 09:25:38 2012] Detection parameters:
  Position = (319.9, 358.0) = 9 17 59.59 -12 3 8.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2008.8 +/- 67.4
  Background counts = 1192.4
  Rate = 0.03 +/- 0.0009

[Tue May  8 09:25:48 2012] Off-axis axis estimate = 4.59'
[Tue May  8 09:53:52 2012] Using EEF radius (= 8.72 ")to estimate initial spatial extent for simple fitting
[Tue May  8 09:53:52 2012] Initial guess for spatial extent in simple fitting = 8.72"
[Tue May  8 09:53:52 2012] source mask rpix=2.0, npix_max = 25, mask sum = 17, frac = 0.677
[Tue May  8 09:53:52 2012] Giving source the simple spatial ID 38 for pass 0, mean size = 8.72"
[Tue May  8 23:48:23 2012] fullrun_pn_xmm0504260101_pi300-10000_cl_pass0_src38.ximg exists
[Tue May  8 23:48:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504260101_pi300-10000_cl_pass0_src38.csv
[Tue May  8 23:48:23 2012] fullrun_pn_xmm0504260101_pi300-10000_cl_pass0_src38_1.ximg exists
[Tue May  8 23:48:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504260101_pi300-10000_cl_pass0_src38.csv
[Tue May  8 23:48:23 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0504260101_pi300-10000_cl_pass0_src38_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0504260101_pi300-10000_cl_pass0_src38.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May  8 23:48:25 2012] fullrun_pn_xmm0504260101_pi300-10000_cl_pass0_tfrozen_src38.ximg exists
[Tue May  8 23:48:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504260101_pi300-10000_cl_pass0_tfrozen_src38.csv
[Tue May  8 23:48:25 2012] fullrun_pn_xmm0504260101_pi300-10000_cl_pass0_tfrozen_src38_1.ximg exists
[Tue May  8 23:48:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504260101_pi300-10000_cl_pass0_tfrozen_src38.csv
[Tue May  8 23:48:25 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0504260101_pi300-10000_cl_pass0_tfrozen_src38_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0504260101_pi300-10000_cl_pass0_tfrozen_src38.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 10 09:28:51 2012] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 41 at 14.105315 pixels away
[Thu May 10 09:28:51 2012] Warning, spatial fit 38 centroid is now closest to src. 43
[Thu May 10 09:28:51 2012] Source 41 is offset by -4.232482 and 2.138701 pixels which is larger than
2 X fitted extent = 0.986487 x 0.986487, not incorporating fit results
[Thu May 10 09:28:51 2012] Vigneting correction estimate = 1.000000
[Thu May 10 09:28:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 10 09:28:51 2012] Assessing source extent using major
[Thu May 10 09:28:51 2012] Source does appear to be extended
[Thu May 10 09:28:51 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 10 09:30:23 2012] Using EEF radius (= 8.72 ")to estimate initial spatial extent for simple fitting
[Thu May 10 09:30:23 2012] Initial guess for spatial extent in simple fitting = 8.72"
[Thu May 10 09:30:23 2012] source mask rpix=2.0, npix_max = 25, mask sum = 17, frac = 0.677
[Thu May 10 09:30:23 2012] Giving source the simple spatial ID 33 for pass 1, mean size = 8.72"
[Thu May 10 21:17:44 2012] fullrun_pn_xmm0504260101_pi300-10000_cl_pass1_src33.ximg exists
[Thu May 10 21:17:44 2012] fullrun_pn_xmm0504260101_pi300-10000_cl_pass1_src33_1.ximg exists
[Thu May 10 21:17:44 2012] Fit fullrun_pn_xmm0504260101_pi300-10000_cl_pass1_src33 appears to have run properly
[Thu May 10 21:17:45 2012] fullrun_pn_xmm0504260101_pi300-10000_cl_pass1_tfrozen_src33.ximg exists
[Thu May 10 21:17:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504260101_pi300-10000_cl_pass1_tfrozen_src33.csv
[Thu May 10 21:17:45 2012] fullrun_pn_xmm0504260101_pi300-10000_cl_pass1_tfrozen_src33_1.ximg exists
[Thu May 10 21:17:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504260101_pi300-10000_cl_pass1_tfrozen_src33.csv
[Thu May 10 21:17:45 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0504260101_pi300-10000_cl_pass1_tfrozen_src33_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0504260101_pi300-10000_cl_pass1_tfrozen_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 12 02:47:15 2012] Warning, spatial fit 33 centroid is now closest to src. 3
[Sat May 12 02:47:15 2012] Spatial fit model total counts = 10923.300000, observed total counts = 10668.000000
[Sat May 12 02:47:15 2012] Offset between fit and detection position for source 41 = 5.060282 pixels
[Sat May 12 02:47:15 2012] Warning, changing simple spatial fit ID from 33 to 35
[Sat May 12 02:47:15 2012] 10853.816000 total counts/ 10578.000000 bgd. counts: snr = 2.681746
Spatial fit parameters:
  Offset between fit and detection position for source 41 = 5.060282 pixels
  Position = (324.0, 361.0) = 9 17 58.37 -12 2 51.6
  Extent = 17.3" x 17.3", rotation angle = 5
  Source counts = 275.8 +/- 104.2
  Background counts = 10578.0
  Rate = 0.003 +/- 0.001
[Sat May 12 02:47:16 2012] Vigneting correction estimate = 1.000000
[Sat May 12 02:47:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 12 02:47:16 2012] Assessing source extent using major
[Sat May 12 02:47:16 2012] Source does appear to be extended
[Sat May 12 02:47:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 12 02:47:16 2012] Source is confused with source 37
[Sat May 12 02:48:10 2012] XMMSAS src. selection expression = ellipse(28138.894000, 31356.086000, 1040.376030, 1040.376030, 5.349000, X, Y)
[Sat May 12 02:48:10 2012] Writing source region out to fullrun_pn_xmm0504260101_pi300-10000_pass1_cl_src41_src.reg
[Sat May 12 02:48:10 2012] Extracting stamp from image fullrun_pn_xmm0504260101_pi300-10000_cl_sm2.00.img.gz, (264, 301) - (384, 421)
[Sat May 12 02:48:10 2012] XMMSAS bgd. selection expression = annulus(28138.894000, 31356.086000, 1733.960050, 3467.920100, X, Y) && !ellipse(25939.592600, 27946.472200, 6797.280196, 6797.280196, 0.000000, X, Y) && !ellipse(24697.648000, 29304.656000, 3714.120107, 3714.120107, -0.000000, X, Y) && !ellipse(25916.682922, 29596.718140, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24905.424744, 34269.994507, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26087.061462, 34100.760284, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25987.431488, 33733.102448, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24877.052000, 33266.998000, 1467.992042, 1467.992042, 0.000000, X, Y) && !ellipse(27602.414124, 33260.870972, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27538.762600, 32779.686000, 1531.008044, 1531.008044, 0.000000, X, Y) && !ellipse(25659.992035, 32885.343628, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25879.226000, 31857.436000, 1467.992042, 1467.992042, 0.000000, X, Y) && !ellipse(27258.420563, 31890.220062, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28586.429047, 30578.728516, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23582.076000, 29910.324000, 1142.936033, 1142.936033, 0.000000, X, Y) && !ellipse(28844.532410, 30174.866699, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30705.997345, 29259.534729, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31742.759735, 28985.389679, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29111.777039, 29818.471497, 870.000000, 870.000000, 0.000000, X, Y)
[Sat May 12 02:48:10 2012] Writing fullrun_pn_xmm0504260101_pi300-10000_pass1_cl_src41.gif
[Sat May 12 04:43:14 2012] Mean detx,y = (3975.13, -1624.34) 
[Sat May 12 04:43:22 2012] Setting backscal keywords in source and bgd. spectrum
[Sat May 12 04:44:27 2012] Binned source spectrum to 10 counts/bin
[Sat May 12 04:44:28 2012] Setting source spectrum file to fullrun_pn_xmm0504260101_pi300-10000_pass1_cl_src41_src_b10.pi.gz
[Sat May 12 04:44:28 2012] Setting bgd. spectrum file to fullrun_pn_xmm0504260101_pi300-10000_pass1_cl_src41_bgd.pi.gz
[Tue May 15 08:09:05 2012] Updating aperture counts using extracted products
[Tue May 15 08:09:05 2012] Error reading totcts from fullrun_pn_xmm0504260101_pi300-10000_pass1_cl_src41_src_b10.pi.gz
[Tue May 15 08:09:08 2012] Calculating source flux in energy range 0.30-8.00
[Tue May 15 08:09:08 2012] Using photon index=1.80, rate=0.00343, arf fullrun_pn_xmm0504260101_pi300-10000_pass1_cl_src41.arf
[Tue May 15 08:09:08 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 15 08:09:08 2012] Updating source flux to 9.8e-15
[Tue May 15 08:18:46 2012] Flag b found in src. 41 procflags, skipping spectral fitting
[Tue May 15 08:18:46 2012] Flag c found in src. 41 procflags, skipping spectral fitting