[Tue May  8 09:25:36 2012] Detection parameters:
  Position = (320.8, 376.9) = 9 17 59.31 -12 1 42.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 343.7 +/- 45.4
  Background counts = 914.2
  Rate = 0.004 +/- 0.0006

[Tue May  8 09:25:48 2012] Off-axis axis estimate = 5.92'
[Tue May  8 09:53:52 2012] Using EEF radius (= 9.39 ")to estimate initial spatial extent for simple fitting
[Tue May  8 09:53:52 2012] Initial guess for spatial extent in simple fitting = 9.39"
[Tue May  8 09:53:52 2012] source mask rpix=2.2, npix_max = 28, mask sum = 36, frac = 1.274
[Tue May  8 09:53:52 2012] Giving source the simple spatial ID 30 for pass 0, mean size = 9.39"
[Tue May  8 23:48:23 2012] fullrun_pn_xmm0504260101_pi300-10000_cl_pass0_src30.ximg exists
[Tue May  8 23:48:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504260101_pi300-10000_cl_pass0_src30.csv
[Tue May  8 23:48:23 2012] fullrun_pn_xmm0504260101_pi300-10000_cl_pass0_src30_1.ximg exists
[Tue May  8 23:48:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504260101_pi300-10000_cl_pass0_src30.csv
[Tue May  8 23:48:23 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0504260101_pi300-10000_cl_pass0_src30_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0504260101_pi300-10000_cl_pass0_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May  8 23:48:25 2012] fullrun_pn_xmm0504260101_pi300-10000_cl_pass0_tfrozen_src30.ximg exists
[Tue May  8 23:48:25 2012] fullrun_pn_xmm0504260101_pi300-10000_cl_pass0_tfrozen_src30_1.ximg exists
[Tue May  8 23:48:25 2012] Fit fullrun_pn_xmm0504260101_pi300-10000_cl_pass0_tfrozen_src30 appears to have run properly
[Thu May 10 09:28:51 2012] Spatial fit model total counts = 6653.090000, observed total counts = 6653.000000
[Thu May 10 09:28:51 2012] Offset between fit and detection position for source 33 = 1.023349 pixels
[Thu May 10 09:28:51 2012] Warning, changing simple spatial fit ID from 30 to 26
[Thu May 10 09:28:51 2012] 6506.160000 total counts/ 6467.370000 bgd. counts: snr = 0.482343
Spatial fit parameters:
  Offset between fit and detection position for source 33 = 1.023349 pixels
  Position = (321.7, 377.5) = 9 17 59.06 -12 1 39.8
  Extent = 3.3 (2.4-6.2)", rotation angle = 0
  Source counts = 38.8 +/- 80.7
  Background counts = 6467.4
  Rate = 0.0005 +/- 0.001
  Deleting source due to low Poisson probability