[Tue May  8 09:26:18 2012] Detection parameters:
  Position = (340.5, 252.6) = 9 17 53.47 -12 10 39.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1054.7 +/- 41.1
  Background counts = 278.3
  Rate = 0.01 +/- 0.0006

[Tue May  8 09:26:21 2012] Off-axis axis estimate = 4.51'
[Thu May 10 02:09:29 2012] Using EEF radius (= 8.68 ")to estimate initial spatial extent for simple fitting
[Thu May 10 02:09:29 2012] Initial guess for spatial extent in simple fitting = 8.68"
[Thu May 10 02:09:29 2012] source mask rpix=2.0, npix_max = 24, mask sum = 19, frac = 0.762
[Thu May 10 02:09:29 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 8.68"
[Thu May 10 09:28:12 2012] fullrun_mos2_xmm0504260101_pi300-10000_cl_pass0_src5.ximg exists
[Thu May 10 09:28:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504260101_pi300-10000_cl_pass0_src5.csv
[Thu May 10 09:28:12 2012] fullrun_mos2_xmm0504260101_pi300-10000_cl_pass0_src5_1.ximg exists
[Thu May 10 09:28:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504260101_pi300-10000_cl_pass0_src5.csv
[Thu May 10 09:28:12 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504260101_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504260101_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 10 09:28:13 2012] fullrun_mos2_xmm0504260101_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Thu May 10 09:28:13 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0504260101_pi300-10000_cl_pass0_tfrozen_src5.csv
[Thu May 10 09:28:13 2012] fullrun_mos2_xmm0504260101_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Thu May 10 09:28:13 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0504260101_pi300-10000_cl_pass0_tfrozen_src5.csv
[Thu May 10 09:28:13 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504260101_pi300-10000_cl_pass0_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504260101_pi300-10000_cl_pass0_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 10 09:29:42 2012] Spatial fit model total counts = -7.839290, observed total counts = 1942.000000
[Thu May 10 09:29:42 2012] Poor agreement between spatial fit and data for source 39
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu May 10 09:29:42 2012] Vigneting correction estimate = 1.000000
[Thu May 10 09:29:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 10 09:29:42 2012] Assessing source extent using major
[Thu May 10 09:29:42 2012] Source does appear to be extended
[Thu May 10 09:29:42 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 11 21:10:09 2012] Using EEF radius (= 8.68 ")to estimate initial spatial extent for simple fitting
[Fri May 11 21:10:09 2012] Initial guess for spatial extent in simple fitting = 8.68"
[Fri May 11 21:10:09 2012] source mask rpix=2.0, npix_max = 24, mask sum = 19, frac = 0.762
[Fri May 11 21:10:09 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 8.68"
[Sat May 12 02:46:46 2012] fullrun_mos2_xmm0504260101_pi300-10000_cl_pass1_src5.ximg exists
[Sat May 12 02:46:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504260101_pi300-10000_cl_pass1_src5.csv
[Sat May 12 02:46:46 2012] fullrun_mos2_xmm0504260101_pi300-10000_cl_pass1_src5_1.ximg exists
[Sat May 12 02:46:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504260101_pi300-10000_cl_pass1_src5.csv
[Sat May 12 02:46:46 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504260101_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504260101_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 12 02:46:47 2012] fullrun_mos2_xmm0504260101_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Sat May 12 02:46:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504260101_pi300-10000_cl_pass1_tfrozen_src5.csv
[Sat May 12 02:46:47 2012] fullrun_mos2_xmm0504260101_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Sat May 12 02:46:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504260101_pi300-10000_cl_pass1_tfrozen_src5.csv
[Sat May 12 02:46:47 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504260101_pi300-10000_cl_pass1_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504260101_pi300-10000_cl_pass1_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 12 02:47:40 2012] Spatial fit model total counts = 2941.650000, observed total counts = 1942.000000
[Sat May 12 02:47:40 2012] Poor agreement between spatial fit and data for source 39
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat May 12 02:47:40 2012] Vigneting correction estimate = 1.000000
[Sat May 12 02:47:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 12 02:47:40 2012] Assessing source extent using major
[Sat May 12 02:47:40 2012] Source does appear to be extended
[Sat May 12 02:47:40 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 15 04:38:30 2012] Counts = 1054.692871, rescaling region sizes by 2.000000
[Tue May 15 04:38:30 2012] XMMSAS src. selection expression = ellipse(29576.075287, 21926.580109, 1305.000000, 1305.000000, 0.000000, X, Y)
[Tue May 15 04:38:30 2012] Writing source region out to fullrun_mos2_xmm0504260101_pi300-10000_pass1_cl_src39_src.reg
[Tue May 15 04:38:30 2012] Extracting stamp from image fullrun_mos2_xmm0504260101_pi300-10000_cl_sm2.00.img.gz, (266, 178) - (416, 328)
[Tue May 15 04:38:30 2012] XMMSAS bgd. selection expression = annulus(29576.075287, 21926.580109, 4350.000000, 8700.000000, X, Y) && !ellipse(25928.579720, 27933.155040, 6044.112174, 6044.112174, 0.000000, X, Y) && !ellipse(26748.587400, 28540.058400, 3620.544104, 3620.544104, 0.000000, X, Y) && !ellipse(24011.054230, 27243.069183, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35011.876068, 20415.159546, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25436.996124, 25278.482910, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27768.790000, 25483.698000, 1135.608033, 1135.608033, 0.000000, X, Y) && !ellipse(28363.741119, 31111.322083, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24761.822174, 25362.509277, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27725.774000, 30478.756000, 1408.488041, 1408.488041, 0.000000, X, Y) && !ellipse(22669.677340, 18115.417960, 453.712013, 453.712013, 0.000000, X, Y) && !ellipse(28800.204000, 29894.799600, 1313.760038, 1313.760038, 0.000000, X, Y) && !ellipse(28588.999115, 26752.979980, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28830.532440, 27796.714478, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29100.210000, 31055.654000, 2780.736080, 2780.736080, 0.000000, X, Y) && !ellipse(27329.456000, 31158.894000, 1443.208042, 1443.208042, 0.000000, X, Y) && !ellipse(27792.989471, 24756.084656, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23192.580000, 25790.014000, 2498.384072, 2498.384072, 0.000000, X, Y) && !ellipse(31743.693200, 28965.488400, 354.496010, 354.496010, 0.000000, X, Y) && !ellipse(22306.666000, 24816.398000, 1250.952036, 1250.952036, 0.000000, X, Y) && !ellipse(28640.514000, 25609.708000, 1259.968036, 1259.968036, 0.000000, X, Y)
[Tue May 15 04:38:30 2012] Writing fullrun_mos2_xmm0504260101_pi300-10000_pass1_cl_src39.gif
[Tue May 15 04:56:51 2012] Mean detx,y = (604.90, -6913.12) 
[Tue May 15 04:56:54 2012] Setting backscal keywords in source and bgd. spectrum
[Tue May 15 04:58:56 2012] Binned source spectrum to 10 counts/bin
[Tue May 15 04:58:56 2012] Setting source spectrum file to fullrun_mos2_xmm0504260101_pi300-10000_pass1_cl_src39_src_b10.pi.gz
[Tue May 15 04:58:56 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0504260101_pi300-10000_pass1_cl_src39_bgd.pi.gz
[Tue May 15 06:45:48 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue May 15 06:45:48 2012] rmf not generated due to insufficient counts
[Tue May 15 08:09:14 2012] Updating aperture counts using extracted products
[Tue May 15 08:09:14 2012] Error reading totcts from fullrun_mos2_xmm0504260101_pi300-10000_pass1_cl_src39_src_b10.pi.gz
[Tue May 15 08:09:15 2012] Calculating source flux in energy range 0.30-8.00
[Tue May 15 08:09:15 2012] Using photon index=1.80, rate=0.0143, arf fullrun_mos2_xmm0504260101_pi300-10000_pass1_cl_src39.arf
[Tue May 15 08:09:15 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 15 08:09:15 2012] Updating source flux to 2.1e-13
[Tue May 15 08:15:15 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting