[Tue May  8 09:26:17 2012] Detection parameters:
  Position = (320.0, 285.1) = 9 17 59.55 -12 8 21.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 413.4 +/- 43.4
  Background counts = 611.1
  Rate = 0.004 +/- 0.0004

[Tue May  8 09:26:21 2012] Off-axis axis estimate = 1.84'
[Thu May 10 02:09:29 2012] Using EEF radius (= 7.35 ")to estimate initial spatial extent for simple fitting
[Thu May 10 02:09:29 2012] Initial guess for spatial extent in simple fitting = 7.35"
[Thu May 10 02:09:29 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.835
[Thu May 10 02:09:29 2012] Giving source the simple spatial ID 22 for pass 0, mean size = 7.35"
[Thu May 10 09:28:13 2012] fullrun_mos2_xmm0504260101_pi300-10000_cl_pass0_src22.ximg exists
[Thu May 10 09:28:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504260101_pi300-10000_cl_pass0_src22.csv
[Thu May 10 09:28:13 2012] fullrun_mos2_xmm0504260101_pi300-10000_cl_pass0_src22_1.ximg exists
[Thu May 10 09:28:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504260101_pi300-10000_cl_pass0_src22.csv
[Thu May 10 09:28:13 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504260101_pi300-10000_cl_pass0_src22_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504260101_pi300-10000_cl_pass0_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 10 09:28:13 2012] fullrun_mos2_xmm0504260101_pi300-10000_cl_pass0_tfrozen_src22.ximg exists
[Thu May 10 09:28:13 2012] fullrun_mos2_xmm0504260101_pi300-10000_cl_pass0_tfrozen_src22_1.ximg exists
[Thu May 10 09:28:13 2012] Fit fullrun_mos2_xmm0504260101_pi300-10000_cl_pass0_tfrozen_src22 appears to have run properly
[Thu May 10 09:29:42 2012] Source 36 is offset by 1.798019 and -6.332452 pixels which is larger than
2 X fitted extent = 1.559632 x 1.559632, not incorporating fit results
[Thu May 10 09:29:42 2012] Vigneting correction estimate = 1.000000
[Thu May 10 09:29:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 10 09:29:42 2012] Assessing source extent using major
[Thu May 10 09:29:42 2012] Source does appear to be extended
[Thu May 10 09:29:42 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 11 21:10:09 2012] Using EEF radius (= 7.35 ")to estimate initial spatial extent for simple fitting
[Fri May 11 21:10:09 2012] Initial guess for spatial extent in simple fitting = 7.35"
[Fri May 11 21:10:09 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.835
[Fri May 11 21:10:09 2012] Giving source the simple spatial ID 22 for pass 1, mean size = 7.35"
[Sat May 12 02:46:47 2012] fullrun_mos2_xmm0504260101_pi300-10000_cl_pass1_src22.ximg exists
[Sat May 12 02:46:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504260101_pi300-10000_cl_pass1_src22.csv
[Sat May 12 02:46:47 2012] fullrun_mos2_xmm0504260101_pi300-10000_cl_pass1_src22_1.ximg exists
[Sat May 12 02:46:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504260101_pi300-10000_cl_pass1_src22.csv
[Sat May 12 02:46:47 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504260101_pi300-10000_cl_pass1_src22_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504260101_pi300-10000_cl_pass1_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 12 02:46:48 2012] fullrun_mos2_xmm0504260101_pi300-10000_cl_pass1_tfrozen_src22.ximg exists
[Sat May 12 02:46:48 2012] fullrun_mos2_xmm0504260101_pi300-10000_cl_pass1_tfrozen_src22_1.ximg exists
[Sat May 12 02:46:48 2012] Fit fullrun_mos2_xmm0504260101_pi300-10000_cl_pass1_tfrozen_src22 appears to have run properly
[Sat May 12 02:47:40 2012] Source 36 is offset by -4.790098 and -3.412153 pixels which is larger than
2 X fitted extent = 0.854818 x 0.854818, not incorporating fit results
[Sat May 12 02:47:40 2012] Vigneting correction estimate = 1.000000
[Sat May 12 02:47:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 12 02:47:40 2012] Assessing source extent using major
[Sat May 12 02:47:40 2012] Source does appear to be extended
[Sat May 12 02:47:40 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 12 02:47:40 2012] Source is confused with source 32
[Tue May 15 04:38:31 2012] XMMSAS src. selection expression = ellipse(27792.989471, 24756.084656, 652.500000, 652.500000, 0.000000, X, Y)
[Tue May 15 04:38:31 2012] Writing source region out to fullrun_mos2_xmm0504260101_pi300-10000_pass1_cl_src36_src.reg
[Tue May 15 04:38:31 2012] Extracting stamp from image fullrun_mos2_xmm0504260101_pi300-10000_cl_sm2.00.img.gz, (283, 248) - (358, 323)
[Tue May 15 04:38:31 2012] XMMSAS bgd. selection expression = annulus(27792.989471, 24756.084656, 1087.500000, 2175.000000, X, Y) && !ellipse(25928.579720, 27933.155040, 6044.112174, 6044.112174, 0.000000, X, Y) && !ellipse(26748.587400, 28540.058400, 3620.544104, 3620.544104, 0.000000, X, Y) && !ellipse(29576.075287, 21926.580109, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25436.996124, 25278.482910, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27768.790000, 25483.698000, 1135.608033, 1135.608033, 0.000000, X, Y) && !ellipse(24761.822174, 25362.509277, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28588.999115, 26752.979980, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28830.532440, 27796.714478, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23192.580000, 25790.014000, 2498.384072, 2498.384072, 0.000000, X, Y) && !ellipse(28640.514000, 25609.708000, 1259.968036, 1259.968036, 0.000000, X, Y)
[Tue May 15 04:38:31 2012] Writing fullrun_mos2_xmm0504260101_pi300-10000_pass1_cl_src36.gif
[Tue May 15 05:20:13 2012] Mean detx,y = (357.42, -3608.95) 
[Tue May 15 05:20:14 2012] Setting backscal keywords in source and bgd. spectrum
[Tue May 15 05:20:23 2012] Binned source spectrum to 10 counts/bin
[Tue May 15 05:20:23 2012] Setting source spectrum file to fullrun_mos2_xmm0504260101_pi300-10000_pass1_cl_src36_src_b10.pi.gz
[Tue May 15 05:20:23 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0504260101_pi300-10000_pass1_cl_src36_bgd.pi.gz
[Tue May 15 07:17:32 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue May 15 07:17:32 2012] rmf not generated due to insufficient counts
[Tue May 15 08:09:14 2012] Updating aperture counts using extracted products
[Tue May 15 08:09:14 2012] Error reading totcts from fullrun_mos2_xmm0504260101_pi300-10000_pass1_cl_src36_src_b10.pi.gz
[Tue May 15 08:09:16 2012] Calculating source flux in energy range 0.30-8.00
[Tue May 15 08:09:16 2012] Using photon index=1.80, rate=0.00363, arf fullrun_mos2_xmm0504260101_pi300-10000_pass1_cl_src36.arf
[Tue May 15 08:09:16 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 15 08:09:16 2012] Updating source flux to 3.5e-14
[Tue May 15 08:15:15 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting