[Tue May  8 09:26:17 2012] Detection parameters:
  Position = (285.2, 292.1) = 9 18 9.88 -12 7 51.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1104.7 +/- 61.8
  Background counts = 849.0
  Rate = 0.01 +/- 0.0005

[Tue May  8 09:26:21 2012] Off-axis axis estimate = 1.07'
[Thu May 10 02:09:29 2012] Using EEF radius (= 6.96 ")to estimate initial spatial extent for simple fitting
[Thu May 10 02:09:29 2012] Initial guess for spatial extent in simple fitting = 6.96"
[Thu May 10 02:09:29 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.907
[Thu May 10 02:09:29 2012] Giving source the simple spatial ID 10 for pass 0, mean size = 6.96"
[Thu May 10 09:28:12 2012] fullrun_mos2_xmm0504260101_pi300-10000_cl_pass0_src10.ximg exists
[Thu May 10 09:28:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504260101_pi300-10000_cl_pass0_src10.csv
[Thu May 10 09:28:12 2012] fullrun_mos2_xmm0504260101_pi300-10000_cl_pass0_src10_1.ximg exists
[Thu May 10 09:28:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504260101_pi300-10000_cl_pass0_src10.csv
[Thu May 10 09:28:12 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504260101_pi300-10000_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504260101_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 10 09:28:13 2012] fullrun_mos2_xmm0504260101_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Thu May 10 09:28:13 2012] fullrun_mos2_xmm0504260101_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Thu May 10 09:28:13 2012] Fit fullrun_mos2_xmm0504260101_pi300-10000_cl_pass0_tfrozen_src10 appears to have run properly
[Thu May 10 09:29:42 2012] Warning, spatial fit 10 centroid is now closest to src. 38
[Thu May 10 09:29:42 2012] Vigneting correction estimate = 1.000000
[Thu May 10 09:29:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 10 09:29:42 2012] Assessing source extent using major
[Thu May 10 09:29:42 2012] Source does appear to be extended
[Thu May 10 09:29:42 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 11 21:10:09 2012] Using EEF radius (= 6.96 ")to estimate initial spatial extent for simple fitting
[Fri May 11 21:10:09 2012] Initial guess for spatial extent in simple fitting = 6.96"
[Fri May 11 21:10:09 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.907
[Fri May 11 21:10:09 2012] Giving source the simple spatial ID 10 for pass 1, mean size = 6.96"
[Sat May 12 02:46:47 2012] fullrun_mos2_xmm0504260101_pi300-10000_cl_pass1_src10.ximg exists
[Sat May 12 02:46:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504260101_pi300-10000_cl_pass1_src10.csv
[Sat May 12 02:46:47 2012] fullrun_mos2_xmm0504260101_pi300-10000_cl_pass1_src10_1.ximg exists
[Sat May 12 02:46:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504260101_pi300-10000_cl_pass1_src10.csv
[Sat May 12 02:46:47 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504260101_pi300-10000_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504260101_pi300-10000_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 12 02:46:47 2012] fullrun_mos2_xmm0504260101_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Sat May 12 02:46:47 2012] fullrun_mos2_xmm0504260101_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Sat May 12 02:46:47 2012] Fit fullrun_mos2_xmm0504260101_pi300-10000_cl_pass1_tfrozen_src10 appears to have run properly
[Sat May 12 02:47:40 2012] Source 33 is offset by 6.577634 and 5.482084 pixels which is larger than
2 X fitted extent = 6.401517 x 6.401517, not incorporating fit results
[Sat May 12 02:47:40 2012] Vigneting correction estimate = 1.000000
[Sat May 12 02:47:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 12 02:47:40 2012] Assessing source extent using major
[Sat May 12 02:47:40 2012] Source does appear to be extended
[Sat May 12 02:47:40 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 12 02:47:40 2012] Source is confused with source 31
[Tue May 15 04:38:31 2012] Counts = 1104.651978, rescaling region sizes by 2.000000
[Tue May 15 04:38:31 2012] XMMSAS src. selection expression = ellipse(24761.822174, 25362.509277, 1305.000000, 1305.000000, 0.000000, X, Y)
[Tue May 15 04:38:31 2012] Writing source region out to fullrun_mos2_xmm0504260101_pi300-10000_pass1_cl_src33_src.reg
[Tue May 15 04:38:31 2012] Extracting stamp from image fullrun_mos2_xmm0504260101_pi300-10000_cl_sm2.00.img.gz, (210, 217) - (360, 367)
[Tue May 15 04:38:31 2012] XMMSAS bgd. selection expression = annulus(24761.822174, 25362.509277, 4350.000000, 8700.000000, X, Y) && !ellipse(25928.579720, 27933.155040, 6044.112174, 6044.112174, 0.000000, X, Y) && !ellipse(26748.587400, 28540.058400, 3620.544104, 3620.544104, 0.000000, X, Y) && !ellipse(24011.054230, 27243.069183, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29576.075287, 21926.580109, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25436.996124, 25278.482910, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27768.790000, 25483.698000, 1135.608033, 1135.608033, 0.000000, X, Y) && !ellipse(28363.741119, 31111.322083, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27725.774000, 30478.756000, 1408.488041, 1408.488041, 0.000000, X, Y) && !ellipse(22669.677340, 18115.417960, 453.712013, 453.712013, 0.000000, X, Y) && !ellipse(28800.204000, 29894.799600, 1313.760038, 1313.760038, 0.000000, X, Y) && !ellipse(28588.999115, 26752.979980, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28830.532440, 27796.714478, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29100.210000, 31055.654000, 2780.736080, 2780.736080, 0.000000, X, Y) && !ellipse(27896.171875, 31811.272766, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27329.456000, 31158.894000, 1443.208042, 1443.208042, 0.000000, X, Y) && !ellipse(27792.989471, 24756.084656, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23192.580000, 25790.014000, 2498.384072, 2498.384072, 0.000000, X, Y) && !ellipse(31743.693200, 28965.488400, 354.496010, 354.496010, 0.000000, X, Y) && !ellipse(18479.425476, 29274.620605, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17734.764099, 17143.292603, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22306.666000, 24816.398000, 1250.952036, 1250.952036, 0.000000, X, Y) && !ellipse(28640.514000, 25609.708000, 1259.968036, 1259.968036, 0.000000, X, Y)
[Tue May 15 04:38:31 2012] Writing fullrun_mos2_xmm0504260101_pi300-10000_pass1_cl_src33.gif
[Tue May 15 05:03:35 2012] Mean detx,y = (2272.37, -1292.26) 
[Tue May 15 05:03:38 2012] Setting backscal keywords in source and bgd. spectrum
[Tue May 15 05:06:18 2012] Binned source spectrum to 10 counts/bin
[Tue May 15 05:06:19 2012] Setting source spectrum file to fullrun_mos2_xmm0504260101_pi300-10000_pass1_cl_src33_src_b10.pi.gz
[Tue May 15 05:06:19 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0504260101_pi300-10000_pass1_cl_src33_bgd.pi.gz
[Tue May 15 06:55:45 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue May 15 06:55:45 2012] rmf not generated due to insufficient counts
[Tue May 15 08:09:14 2012] Updating aperture counts using extracted products
[Tue May 15 08:09:14 2012] Error reading totcts from fullrun_mos2_xmm0504260101_pi300-10000_pass1_cl_src33_src_b10.pi.gz
[Tue May 15 08:09:15 2012] Calculating source flux in energy range 0.30-8.00
[Tue May 15 08:09:15 2012] Using photon index=1.80, rate=0.0096, arf fullrun_mos2_xmm0504260101_pi300-10000_pass1_cl_src33.arf
[Tue May 15 08:09:15 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 15 08:09:15 2012] Updating source flux to 8.6e-14
[Tue May 15 08:15:15 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting