[Tue May  8 09:26:15 2012] Detection parameters:
  Position = (155.9, 331.1) = 9 18 48.23 -12 4 59.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 510.3 +/- 32.3
  Background counts = 143.0
  Rate = 0.004 +/- 0.0003

[Tue May  8 09:26:21 2012] Off-axis axis estimate = 10.60'
[Thu May 10 02:09:29 2012] Using EEF radius (= 11.73 ")to estimate initial spatial extent for simple fitting
[Thu May 10 02:09:29 2012] Initial guess for spatial extent in simple fitting = 11.73"
[Thu May 10 02:09:29 2012] source mask rpix=2.7, npix_max = 40, mask sum = 36, frac = 0.881
[Thu May 10 02:09:29 2012] Giving source the simple spatial ID 19 for pass 0, mean size = 11.73"
[Thu May 10 09:28:13 2012] fullrun_mos2_xmm0504260101_pi300-10000_cl_pass0_src19.ximg exists
[Thu May 10 09:28:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504260101_pi300-10000_cl_pass0_src19.csv
[Thu May 10 09:28:13 2012] fullrun_mos2_xmm0504260101_pi300-10000_cl_pass0_src19_1.ximg exists
[Thu May 10 09:28:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504260101_pi300-10000_cl_pass0_src19.csv
[Thu May 10 09:28:13 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504260101_pi300-10000_cl_pass0_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504260101_pi300-10000_cl_pass0_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 10 09:28:13 2012] fullrun_mos2_xmm0504260101_pi300-10000_cl_pass0_tfrozen_src19.ximg exists
[Thu May 10 09:28:13 2012] fullrun_mos2_xmm0504260101_pi300-10000_cl_pass0_tfrozen_src19_1.ximg exists
[Thu May 10 09:28:13 2012] Fit fullrun_mos2_xmm0504260101_pi300-10000_cl_pass0_tfrozen_src19 appears to have run properly
[Thu May 10 09:29:42 2012] Warning: source 19 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 27 at 15.813651 pixels away
[Thu May 10 09:29:42 2012] Vigneting correction estimate = 1.000000
[Thu May 10 09:29:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 10 09:29:42 2012] Assessing source extent using major
[Thu May 10 09:29:42 2012] Source does appear to be extended
[Thu May 10 09:29:42 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 11 21:10:09 2012] Using EEF radius (= 11.73 ")to estimate initial spatial extent for simple fitting
[Fri May 11 21:10:09 2012] Initial guess for spatial extent in simple fitting = 11.73"
[Fri May 11 21:10:09 2012] source mask rpix=2.7, npix_max = 40, mask sum = 36, frac = 0.881
[Fri May 11 21:10:09 2012] Giving source the simple spatial ID 19 for pass 1, mean size = 11.73"
[Sat May 12 02:46:47 2012] fullrun_mos2_xmm0504260101_pi300-10000_cl_pass1_src19.ximg exists
[Sat May 12 02:46:47 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0504260101_pi300-10000_cl_pass1_src19.csv
[Sat May 12 02:46:47 2012] fullrun_mos2_xmm0504260101_pi300-10000_cl_pass1_src19_1.ximg exists
[Sat May 12 02:46:47 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0504260101_pi300-10000_cl_pass1_src19.csv
[Sat May 12 02:46:47 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504260101_pi300-10000_cl_pass1_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504260101_pi300-10000_cl_pass1_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 12 02:46:48 2012] fullrun_mos2_xmm0504260101_pi300-10000_cl_pass1_tfrozen_src19.ximg exists
[Sat May 12 02:46:48 2012] fullrun_mos2_xmm0504260101_pi300-10000_cl_pass1_tfrozen_src19_1.ximg exists
[Sat May 12 02:46:48 2012] Fit fullrun_mos2_xmm0504260101_pi300-10000_cl_pass1_tfrozen_src19 appears to have run properly
[Sat May 12 02:47:40 2012] Warning: source 19 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 27 at 14.019653 pixels away
[Sat May 12 02:47:40 2012] Vigneting correction estimate = 1.000000
[Sat May 12 02:47:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 12 02:47:40 2012] Assessing source extent using major
[Sat May 12 02:47:40 2012] Source does appear to be extended
[Sat May 12 02:47:40 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 15 04:38:31 2012] XMMSAS src. selection expression = ellipse(13512.394012, 28759.420135, 652.500000, 652.500000, 0.000000, X, Y)
[Tue May 15 04:38:31 2012] Writing source region out to fullrun_mos2_xmm0504260101_pi300-10000_pass1_cl_src27_src.reg
[Tue May 15 04:38:31 2012] Extracting stamp from image fullrun_mos2_xmm0504260101_pi300-10000_cl_sm2.00.img.gz, (118, 294) - (193, 369)
[Tue May 15 04:38:31 2012] XMMSAS bgd. selection expression = annulus(13512.394012, 28759.420135, 1087.500000, 2175.000000, X, Y)
[Tue May 15 04:38:31 2012] Writing fullrun_mos2_xmm0504260101_pi300-10000_pass1_cl_src27.gif
[Tue May 15 05:19:37 2012] Mean detx,y = (9561.40, 7964.28) 
[Tue May 15 05:19:38 2012] Setting backscal keywords in source and bgd. spectrum
[Tue May 15 05:20:03 2012] Binned source spectrum to 10 counts/bin
[Tue May 15 05:20:03 2012] Setting source spectrum file to fullrun_mos2_xmm0504260101_pi300-10000_pass1_cl_src27_src_b10.pi.gz
[Tue May 15 05:20:03 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0504260101_pi300-10000_pass1_cl_src27_bgd.pi.gz
[Tue May 15 07:17:24 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue May 15 07:17:24 2012] rmf not generated due to insufficient counts
[Tue May 15 08:09:14 2012] Updating aperture counts using extracted products
[Tue May 15 08:09:14 2012] Error reading totcts from fullrun_mos2_xmm0504260101_pi300-10000_pass1_cl_src27_src_b10.pi.gz
[Tue May 15 08:09:16 2012] Calculating source flux in energy range 0.30-8.00
[Tue May 15 08:09:16 2012] Using photon index=1.80, rate=0.00417, arf fullrun_mos2_xmm0504260101_pi300-10000_pass1_cl_src27.arf
[Tue May 15 08:09:16 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 15 08:09:16 2012] Updating source flux to 1e-13
[Tue May 15 08:15:15 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting