[Tue May  8 09:26:14 2012] Detection parameters:
  Position = (336.6, 343.0) = 9 17 54.63 -12 4 12.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 801.5 +/- 64.7
  Background counts = 599.4
  Rate = 0.009 +/- 0.0007

[Tue May  8 09:26:21 2012] Off-axis axis estimate = 4.25'
[Thu May 10 02:09:29 2012] Using EEF radius (= 8.55 ")to estimate initial spatial extent for simple fitting
[Thu May 10 02:09:29 2012] Initial guess for spatial extent in simple fitting = 8.55"
[Thu May 10 02:09:29 2012] source mask rpix=2.0, npix_max = 24, mask sum = 11, frac = 0.452
[Thu May 10 02:09:29 2012] Skipping simple spatial due to low active detector fraction
[Thu May 10 09:29:42 2012] Spatial fit model total counts = 13548.300000, observed total counts = 13530.000000
[Thu May 10 09:29:42 2012] Offset between fit and detection position for source 21 = 5.154386 pixels
[Thu May 10 09:29:42 2012] Warning, changing simple spatial fit ID from -1 to 11
[Thu May 10 09:29:42 2012] 13007.797000 total counts/ 12455.900000 bgd. counts: snr = 4.945048
Spatial fit parameters:
  Offset between fit and detection position for source 21 = 5.154386 pixels
  Position = (331.6, 344.2) = 9 17 56.12 -12 4 4.6
  Extent = 16.4 (16.2-16.5)", rotation angle = 0
  Source counts = 551.9 +/- 114.1
  Background counts = 12455.9
  Rate = 0.005 +/- 0.001
[Thu May 10 09:29:42 2012] Vigneting correction estimate = 1.000000
[Thu May 10 09:29:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 10 09:29:42 2012] Assessing source extent using major axis lower bound
[Thu May 10 09:29:42 2012] Source does appear to be extended
[Thu May 10 09:29:42 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 10 09:29:42 2012] Source is confused with source 22
[Thu May 10 09:29:42 2012] Source is confused with source 20
[Fri May 11 21:10:09 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri May 11 21:10:09 2012] Initial guess for spatial extent in simple fitting = 16.42"
[Fri May 11 21:10:09 2012] source mask rpix=3.8, npix_max = 73, mask sum = 64, frac = 0.875
[Fri May 11 21:10:09 2012] Giving source the simple spatial ID 13 for pass 1, mean size = 16.42"
[Sat May 12 02:46:47 2012] fullrun_mos2_xmm0504260101_pi300-10000_cl_pass1_src13.ximg exists
[Sat May 12 02:46:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504260101_pi300-10000_cl_pass1_src13.csv
[Sat May 12 02:46:47 2012] fullrun_mos2_xmm0504260101_pi300-10000_cl_pass1_src13_1.ximg exists
[Sat May 12 02:46:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504260101_pi300-10000_cl_pass1_src13.csv
[Sat May 12 02:46:47 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504260101_pi300-10000_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504260101_pi300-10000_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 12 02:46:47 2012] fullrun_mos2_xmm0504260101_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Sat May 12 02:46:47 2012] fullrun_mos2_xmm0504260101_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Sat May 12 02:46:47 2012] Fit fullrun_mos2_xmm0504260101_pi300-10000_cl_pass1_tfrozen_src13 appears to have run properly
[Sat May 12 02:47:40 2012] Warning: source 13 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 21 at 12.691392 pixels away
[Sat May 12 02:47:40 2012] Source 21 is offset by 4.245057 and -4.741775 pixels which is larger than
2 X fitted extent = 2.659108 x 7.990621, not incorporating fit results
[Sat May 12 02:47:40 2012] Vigneting correction estimate = 1.000000
[Sat May 12 02:47:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 12 02:47:40 2012] Assessing source extent using major axis lower bound
[Sat May 12 02:47:40 2012] Source does appear to be extended
[Sat May 12 02:47:40 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 15 04:38:31 2012] XMMSAS src. selection expression = ellipse(28800.204000, 29894.799600, 985.320028, 985.320028, 0.000000, X, Y)
[Tue May 15 04:38:31 2012] Writing source region out to fullrun_mos2_xmm0504260101_pi300-10000_pass1_cl_src21_src.reg
[Tue May 15 04:38:31 2012] Extracting stamp from image fullrun_mos2_xmm0504260101_pi300-10000_cl_sm2.00.img.gz, (275, 288) - (388, 401)
[Tue May 15 04:38:31 2012] XMMSAS bgd. selection expression = annulus(28800.204000, 29894.799600, 1642.200047, 3284.400095, X, Y) && !ellipse(25928.579720, 27933.155040, 6044.112174, 6044.112174, 0.000000, X, Y) && !ellipse(26748.587400, 28540.058400, 3620.544104, 3620.544104, 0.000000, X, Y) && !ellipse(27768.790000, 25483.698000, 1135.608033, 1135.608033, 0.000000, X, Y) && !ellipse(28363.741119, 31111.322083, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27725.774000, 30478.756000, 1408.488041, 1408.488041, 0.000000, X, Y) && !ellipse(28588.999115, 26752.979980, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28830.532440, 27796.714478, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29100.210000, 31055.654000, 2780.736080, 2780.736080, 0.000000, X, Y) && !ellipse(27896.171875, 31811.272766, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27329.456000, 31158.894000, 1443.208042, 1443.208042, 0.000000, X, Y) && !ellipse(23192.580000, 25790.014000, 2498.384072, 2498.384072, 0.000000, X, Y) && !ellipse(31743.693200, 28965.488400, 354.496010, 354.496010, 0.000000, X, Y) && !ellipse(28640.514000, 25609.708000, 1259.968036, 1259.968036, 0.000000, X, Y)
[Tue May 15 04:38:31 2012] Writing fullrun_mos2_xmm0504260101_pi300-10000_pass1_cl_src21.gif
[Tue May 15 05:07:31 2012] Mean detx,y = (-3324.47, -94.85) 
[Tue May 15 05:07:32 2012] Setting backscal keywords in source and bgd. spectrum
[Tue May 15 05:07:47 2012] Binned source spectrum to 10 counts/bin
[Tue May 15 05:07:48 2012] Setting source spectrum file to fullrun_mos2_xmm0504260101_pi300-10000_pass1_cl_src21_src_b10.pi.gz
[Tue May 15 05:07:48 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0504260101_pi300-10000_pass1_cl_src21_bgd.pi.gz
[Tue May 15 08:09:14 2012] Updating aperture counts using extracted products
[Tue May 15 08:09:14 2012] Error reading totcts from fullrun_mos2_xmm0504260101_pi300-10000_pass1_cl_src21_src_b10.pi.gz
[Tue May 15 08:09:15 2012] Calculating source flux in energy range 0.30-8.00
[Tue May 15 08:09:15 2012] Using photon index=1.80, rate=0.00525, arf fullrun_mos2_xmm0504260101_pi300-10000_pass1_cl_src21.arf
[Tue May 15 08:09:15 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 15 08:09:15 2012] Updating source flux to 5.6e-14
[Tue May 15 08:15:15 2012] Flag b found in src. 21 procflags, skipping spectral fitting
[Tue May 15 08:15:15 2012] Flag c found in src. 21 procflags, skipping spectral fitting