[Tue May  8 09:26:13 2012] Detection parameters:
  Position = (326.6, 358.2) = 9 17 57.60 -12 3 14.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 973.0 +/- 113.7
  Background counts = 597.6
  Rate = 0.01 +/- 0.001

[Tue May  8 09:26:21 2012] Off-axis axis estimate = 4.79'
[Thu May 10 02:09:29 2012] Using EEF radius (= 8.82 ")to estimate initial spatial extent for simple fitting
[Thu May 10 02:09:29 2012] Initial guess for spatial extent in simple fitting = 8.82"
[Thu May 10 02:09:29 2012] source mask rpix=2.0, npix_max = 25, mask sum = 14, frac = 0.548
[Thu May 10 02:09:29 2012] Giving source the simple spatial ID 9 for pass 0, mean size = 8.82"
[Thu May 10 09:28:12 2012] fullrun_mos2_xmm0504260101_pi300-10000_cl_pass0_src9.ximg exists
[Thu May 10 09:28:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504260101_pi300-10000_cl_pass0_src9.csv
[Thu May 10 09:28:12 2012] fullrun_mos2_xmm0504260101_pi300-10000_cl_pass0_src9_1.ximg exists
[Thu May 10 09:28:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504260101_pi300-10000_cl_pass0_src9.csv
[Thu May 10 09:28:12 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504260101_pi300-10000_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504260101_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 10 09:28:13 2012] fullrun_mos2_xmm0504260101_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Thu May 10 09:28:13 2012] fullrun_mos2_xmm0504260101_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Thu May 10 09:28:13 2012] Fit fullrun_mos2_xmm0504260101_pi300-10000_cl_pass0_tfrozen_src9 appears to have run properly
[Thu May 10 09:29:42 2012] Source 16 is offset by 7.793783 and 1.525219 pixels which is larger than
2 X fitted extent = 5.020690 x 5.020690, not incorporating fit results
[Thu May 10 09:29:42 2012] Vigneting correction estimate = 1.000000
[Thu May 10 09:29:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 10 09:29:42 2012] Assessing source extent using major
[Thu May 10 09:29:42 2012] Source does appear to be extended
[Thu May 10 09:29:42 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 10 09:29:42 2012] Source is confused with source 22
[Thu May 10 09:29:42 2012] Source is confused with source 13
[Fri May 11 21:10:09 2012] Using EEF radius (= 8.82 ")to estimate initial spatial extent for simple fitting
[Fri May 11 21:10:09 2012] Initial guess for spatial extent in simple fitting = 8.82"
[Fri May 11 21:10:09 2012] source mask rpix=2.0, npix_max = 25, mask sum = 14, frac = 0.548
[Fri May 11 21:10:09 2012] Giving source the simple spatial ID 9 for pass 1, mean size = 8.82"
[Sat May 12 02:46:47 2012] fullrun_mos2_xmm0504260101_pi300-10000_cl_pass1_src9.ximg exists
[Sat May 12 02:46:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504260101_pi300-10000_cl_pass1_src9.csv
[Sat May 12 02:46:47 2012] fullrun_mos2_xmm0504260101_pi300-10000_cl_pass1_src9_1.ximg exists
[Sat May 12 02:46:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504260101_pi300-10000_cl_pass1_src9.csv
[Sat May 12 02:46:47 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504260101_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504260101_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 12 02:46:47 2012] fullrun_mos2_xmm0504260101_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Sat May 12 02:46:47 2012] fullrun_mos2_xmm0504260101_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Sat May 12 02:46:47 2012] Fit fullrun_mos2_xmm0504260101_pi300-10000_cl_pass1_tfrozen_src9 appears to have run properly
[Sat May 12 02:47:40 2012] Warning, spatial fit 9 centroid is now closest to src. 22
[Sat May 12 02:47:40 2012] Vigneting correction estimate = 1.000000
[Sat May 12 02:47:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 12 02:47:40 2012] Assessing source extent using major
[Sat May 12 02:47:40 2012] Source does appear to be extended
[Sat May 12 02:47:40 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 15 04:38:31 2012] XMMSAS src. selection expression = ellipse(28363.741119, 31111.322083, 652.500000, 652.500000, 0.000000, X, Y)
[Tue May 15 04:38:31 2012] Writing source region out to fullrun_mos2_xmm0504260101_pi300-10000_pass1_cl_src16_src.reg
[Tue May 15 04:38:31 2012] Extracting stamp from image fullrun_mos2_xmm0504260101_pi300-10000_cl_sm2.00.img.gz, (289, 321) - (364, 396)
[Tue May 15 04:38:31 2012] XMMSAS bgd. selection expression = annulus(28363.741119, 31111.322083, 1087.500000, 2175.000000, X, Y) && !ellipse(25928.579720, 27933.155040, 6044.112174, 6044.112174, 0.000000, X, Y) && !ellipse(26748.587400, 28540.058400, 3620.544104, 3620.544104, 0.000000, X, Y) && !ellipse(27725.774000, 30478.756000, 1408.488041, 1408.488041, 0.000000, X, Y) && !ellipse(28800.204000, 29894.799600, 1313.760038, 1313.760038, 0.000000, X, Y) && !ellipse(29100.210000, 31055.654000, 2780.736080, 2780.736080, 0.000000, X, Y) && !ellipse(27896.171875, 31811.272766, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27329.456000, 31158.894000, 1443.208042, 1443.208042, 0.000000, X, Y)
[Tue May 15 04:38:31 2012] Writing fullrun_mos2_xmm0504260101_pi300-10000_pass1_cl_src16.gif
[Tue May 15 05:03:00 2012] Mean detx,y = (-3770.73, 1107.31) 
[Tue May 15 05:03:02 2012] Setting backscal keywords in source and bgd. spectrum
[Tue May 15 05:03:15 2012] Binned source spectrum to 10 counts/bin
[Tue May 15 05:03:16 2012] Setting source spectrum file to fullrun_mos2_xmm0504260101_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Tue May 15 05:03:16 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0504260101_pi300-10000_pass1_cl_src16_bgd.pi.gz
[Tue May 15 06:55:36 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue May 15 06:55:36 2012] rmf not generated due to insufficient counts
[Tue May 15 08:09:14 2012] Updating aperture counts using extracted products
[Tue May 15 08:09:14 2012] Error reading totcts from fullrun_mos2_xmm0504260101_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Tue May 15 08:09:15 2012] Calculating source flux in energy range 0.30-8.00
[Tue May 15 08:09:15 2012] Using photon index=1.80, rate=0.0112, arf fullrun_mos2_xmm0504260101_pi300-10000_pass1_cl_src16.arf
[Tue May 15 08:09:15 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 15 08:09:15 2012] Updating source flux to 1.4e-13
[Tue May 15 08:15:15 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting