[Tue May  8 09:26:11 2012] Detection parameters:
  Position = (147.9, 390.3) = 9 18 50.59 -12 0 43.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 210.7 +/- 22.7
  Background counts = 120.6
  Rate = 0.002 +/- 0.0002

[Tue May  8 09:26:21 2012] Off-axis axis estimate = 12.79'
[Thu May 10 02:09:29 2012] Using EEF radius (= 12.82 ")to estimate initial spatial extent for simple fitting
[Thu May 10 02:09:29 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu May 10 02:09:29 2012] Initial guess for spatial extent in simple fitting = 12.82"
[Thu May 10 02:09:29 2012] source mask rpix=2.9, npix_max = 47, mask sum = 44, frac = 0.925
[Thu May 10 02:09:29 2012] Giving source the simple spatial ID 35 for pass 0, mean size = 12.82"
[Thu May 10 09:28:13 2012] fullrun_mos2_xmm0504260101_pi300-10000_cl_pass0_src35.ximg exists
[Thu May 10 09:28:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504260101_pi300-10000_cl_pass0_src35.csv
[Thu May 10 09:28:13 2012] fullrun_mos2_xmm0504260101_pi300-10000_cl_pass0_src35_1.ximg exists
[Thu May 10 09:28:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504260101_pi300-10000_cl_pass0_src35.csv
[Thu May 10 09:28:13 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504260101_pi300-10000_cl_pass0_src35_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504260101_pi300-10000_cl_pass0_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 10 09:28:14 2012] fullrun_mos2_xmm0504260101_pi300-10000_cl_pass0_tfrozen_src35.ximg exists
[Thu May 10 09:28:14 2012] fullrun_mos2_xmm0504260101_pi300-10000_cl_pass0_tfrozen_src35_1.ximg exists
[Thu May 10 09:28:14 2012] Fit fullrun_mos2_xmm0504260101_pi300-10000_cl_pass0_tfrozen_src35 appears to have run properly
[Thu May 10 09:29:42 2012] Warning: source 35 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 10 at 16.807555 pixels away
[Thu May 10 09:29:42 2012] Vigneting correction estimate = 1.000000
[Thu May 10 09:29:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 10 09:29:42 2012] Assessing source extent using major
[Thu May 10 09:29:42 2012] Source does appear to be extended
[Thu May 10 09:29:42 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 11 21:10:09 2012] Using EEF radius (= 12.82 ")to estimate initial spatial extent for simple fitting
[Fri May 11 21:10:09 2012] Initial guess for spatial extent in simple fitting = 12.82"
[Fri May 11 21:10:09 2012] source mask rpix=2.9, npix_max = 47, mask sum = 44, frac = 0.925
[Fri May 11 21:10:09 2012] Giving source the simple spatial ID 34 for pass 1, mean size = 12.82"
[Sat May 12 02:46:47 2012] fullrun_mos2_xmm0504260101_pi300-10000_cl_pass1_src34.ximg exists
[Sat May 12 02:46:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504260101_pi300-10000_cl_pass1_src34.csv
[Sat May 12 02:46:47 2012] fullrun_mos2_xmm0504260101_pi300-10000_cl_pass1_src34_1.ximg exists
[Sat May 12 02:46:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504260101_pi300-10000_cl_pass1_src34.csv
[Sat May 12 02:46:47 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504260101_pi300-10000_cl_pass1_src34_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504260101_pi300-10000_cl_pass1_src34.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 12 02:46:48 2012] fullrun_mos2_xmm0504260101_pi300-10000_cl_pass1_tfrozen_src34.ximg exists
[Sat May 12 02:46:48 2012] fullrun_mos2_xmm0504260101_pi300-10000_cl_pass1_tfrozen_src34_1.ximg exists
[Sat May 12 02:46:48 2012] Fit fullrun_mos2_xmm0504260101_pi300-10000_cl_pass1_tfrozen_src34 appears to have run properly
[Sat May 12 02:47:40 2012] Warning: source 34 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 10 at 14.998256 pixels away
[Sat May 12 02:47:40 2012] Vigneting correction estimate = 1.000000
[Sat May 12 02:47:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 12 02:47:40 2012] Assessing source extent using major
[Sat May 12 02:47:40 2012] Source does appear to be extended
[Sat May 12 02:47:40 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 15 04:38:31 2012] XMMSAS src. selection expression = ellipse(12815.946640, 33908.820251, 652.500000, 652.500000, 0.000000, X, Y)
[Tue May 15 04:38:31 2012] Writing source region out to fullrun_mos2_xmm0504260101_pi300-10000_pass1_cl_src10_src.reg
[Tue May 15 04:38:31 2012] Extracting stamp from image fullrun_mos2_xmm0504260101_pi300-10000_cl_sm2.00.img.gz, (110, 353) - (185, 428)
[Tue May 15 04:38:31 2012] XMMSAS bgd. selection expression = annulus(12815.946640, 33908.820251, 1087.500000, 2175.000000, X, Y)
[Tue May 15 04:38:31 2012] Writing fullrun_mos2_xmm0504260101_pi300-10000_pass1_cl_src10.gif
[Tue May 15 05:24:18 2012] Mean detx,y = (7063.32, 12561.07) 
[Tue May 15 05:24:20 2012] Setting backscal keywords in source and bgd. spectrum
[Tue May 15 05:24:29 2012] Binned source spectrum to 10 counts/bin
[Tue May 15 05:24:29 2012] Setting source spectrum file to fullrun_mos2_xmm0504260101_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Tue May 15 05:24:29 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0504260101_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Tue May 15 07:56:45 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue May 15 07:56:45 2012] rmf not generated due to insufficient counts
[Tue May 15 08:09:15 2012] Updating aperture counts using extracted products
[Tue May 15 08:09:15 2012] Error reading totcts from fullrun_mos2_xmm0504260101_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Tue May 15 08:09:16 2012] Calculating source flux in energy range 0.30-8.00
[Tue May 15 08:09:16 2012] Using photon index=1.80, rate=0.00172, arf fullrun_mos2_xmm0504260101_pi300-10000_pass1_cl_src10.arf
[Tue May 15 08:09:16 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 15 08:09:16 2012] Updating source flux to 5.3e-14
[Tue May 15 08:15:15 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting