[Tue May  8 09:25:52 2012] Detection parameters:
  Position = (147.7, 389.1) = 9 18 50.65 -12 0 47.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 135.4 +/- 20.5
  Background counts = 170.9
  Rate = 0.001 +/- 0.0002

[Tue May  8 09:26:07 2012] Off-axis axis estimate = 12.75'
[Tue May  8 23:48:26 2012] Using EEF radius (= 12.81 ")to estimate initial spatial extent for simple fitting
[Tue May  8 23:48:26 2012] Initial guess for spatial extent in simple fitting = 12.81"
[Tue May  8 23:48:26 2012] source mask rpix=2.9, npix_max = 47, mask sum = 38, frac = 0.801
[Tue May  8 23:48:26 2012] Giving source the simple spatial ID 65 for pass 0, mean size = 12.81"
[Thu May 10 02:09:27 2012] fullrun_mos1_xmm0504260101_pi300-10000_cl_pass0_src65.ximg exists
[Thu May 10 02:09:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504260101_pi300-10000_cl_pass0_src65.csv
[Thu May 10 02:09:27 2012] fullrun_mos1_xmm0504260101_pi300-10000_cl_pass0_src65_1.ximg exists
[Thu May 10 02:09:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504260101_pi300-10000_cl_pass0_src65.csv
[Thu May 10 02:09:27 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0504260101_pi300-10000_cl_pass0_src65_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0504260101_pi300-10000_cl_pass0_src65.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 10 02:09:29 2012] fullrun_mos1_xmm0504260101_pi300-10000_cl_pass0_tfrozen_src65.ximg exists
[Thu May 10 02:09:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504260101_pi300-10000_cl_pass0_tfrozen_src65.csv
[Thu May 10 02:09:29 2012] fullrun_mos1_xmm0504260101_pi300-10000_cl_pass0_tfrozen_src65_1.ximg exists
[Thu May 10 02:09:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504260101_pi300-10000_cl_pass0_tfrozen_src65.csv
[Thu May 10 02:09:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0504260101_pi300-10000_cl_pass0_tfrozen_src65_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0504260101_pi300-10000_cl_pass0_tfrozen_src65.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 10 09:29:25 2012] Spatial fit model total counts = 1023.090000, observed total counts = 686.000000
[Thu May 10 09:29:25 2012] Poor agreement between spatial fit and data for source 9
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu May 10 09:29:25 2012] Vigneting correction estimate = 1.000000
[Thu May 10 09:29:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 10 09:29:25 2012] Assessing source extent using major
[Thu May 10 09:29:25 2012] Source does appear to be extended
[Thu May 10 09:29:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 10 09:29:25 2012] Deleting source due to low Poisson probability 0.9