[Tue May  8 09:26:06 2012] Detection parameters:
  Position = (389.2, 341.3) = 9 17 39.03 -12 4 10.2
  Extent = 21.7" x 21.7", rotation angle = 0 degrees
  Source counts = 196.7 +/- 22.2
  Background counts = 809.9
  Rate = 0.003 +/- 0.0003

[Tue May  8 09:26:07 2012] Off-axis axis estimate = 7.28'
[Tue May  8 23:48:26 2012] Using EEF radius (= 10.07 ")to estimate initial spatial extent for simple fitting
[Tue May  8 23:48:26 2012] Initial guess for spatial extent in simple fitting = 10.07"
[Tue May  8 23:48:26 2012] source mask rpix=2.3, npix_max = 31, mask sum = 25, frac = 0.789
[Tue May  8 23:48:26 2012] Giving source the simple spatial ID 38 for pass 0, mean size = 10.07"
[Thu May 10 02:09:27 2012] fullrun_mos1_xmm0504260101_pi300-10000_cl_pass0_src38.ximg exists
[Thu May 10 02:09:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504260101_pi300-10000_cl_pass0_src38.csv
[Thu May 10 02:09:27 2012] fullrun_mos1_xmm0504260101_pi300-10000_cl_pass0_src38_1.ximg exists
[Thu May 10 02:09:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504260101_pi300-10000_cl_pass0_src38.csv
[Thu May 10 02:09:27 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0504260101_pi300-10000_cl_pass0_src38_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0504260101_pi300-10000_cl_pass0_src38.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 10 02:09:28 2012] fullrun_mos1_xmm0504260101_pi300-10000_cl_pass0_tfrozen_src38.ximg exists
[Thu May 10 02:09:28 2012] fullrun_mos1_xmm0504260101_pi300-10000_cl_pass0_tfrozen_src38_1.ximg exists
[Thu May 10 02:09:28 2012] Fit fullrun_mos1_xmm0504260101_pi300-10000_cl_pass0_tfrozen_src38 appears to have run properly
[Thu May 10 09:29:24 2012] Warning, spatial fit 38 centroid is now closest to src. 23
[Thu May 10 09:29:25 2012] Source 71 is offset by -3.349241 and -2.838758 pixels which is larger than
2 X fitted extent = 3.251448 x 3.251448, not incorporating fit results
[Thu May 10 09:29:25 2012] Vigneting correction estimate = 1.000000
[Thu May 10 09:29:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 10 09:29:25 2012] Assessing source extent using major
[Thu May 10 09:29:25 2012] Source does appear to be extended
[Thu May 10 09:29:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 10 09:29:25 2012] Source is confused with source 23
[Thu May 10 21:17:46 2012] Using EEF radius (= 10.07 ")to estimate initial spatial extent for simple fitting
[Thu May 10 21:17:46 2012] Initial guess for spatial extent in simple fitting = 10.07"
[Thu May 10 21:17:46 2012] source mask rpix=2.3, npix_max = 31, mask sum = 25, frac = 0.789
[Thu May 10 21:17:46 2012] Giving source the simple spatial ID 37 for pass 1, mean size = 10.07"
[Fri May 11 21:10:07 2012] fullrun_mos1_xmm0504260101_pi300-10000_cl_pass1_src37.ximg exists
[Fri May 11 21:10:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504260101_pi300-10000_cl_pass1_src37.csv
[Fri May 11 21:10:07 2012] fullrun_mos1_xmm0504260101_pi300-10000_cl_pass1_src37_1.ximg exists
[Fri May 11 21:10:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504260101_pi300-10000_cl_pass1_src37.csv
[Fri May 11 21:10:07 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0504260101_pi300-10000_cl_pass1_src37_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0504260101_pi300-10000_cl_pass1_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 11 21:10:08 2012] fullrun_mos1_xmm0504260101_pi300-10000_cl_pass1_tfrozen_src37.ximg exists
[Fri May 11 21:10:08 2012] fullrun_mos1_xmm0504260101_pi300-10000_cl_pass1_tfrozen_src37_1.ximg exists
[Fri May 11 21:10:08 2012] Fit fullrun_mos1_xmm0504260101_pi300-10000_cl_pass1_tfrozen_src37 appears to have run properly
[Sat May 12 02:47:30 2012] Warning, spatial fit 37 centroid is now closest to src. 23
[Sat May 12 02:47:30 2012] Vigneting correction estimate = 1.000000
[Sat May 12 02:47:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 12 02:47:30 2012] Assessing source extent using major
[Sat May 12 02:47:30 2012] Source does appear to be extended
[Sat May 12 02:47:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 14 23:33:41 2012] XMMSAS src. selection expression = ellipse(33811.231995, 29646.938019, 1305.000000, 1305.000000, 0.000000, X, Y)
[Mon May 14 23:33:41 2012] Writing source region out to fullrun_mos1_xmm0504260101_pi300-10000_pass1_cl_src71_src.reg
[Mon May 14 23:33:41 2012] Extracting stamp from image fullrun_mos1_xmm0504260101_pi300-10000_cl_sm2.00.img.gz, (314, 266) - (464, 416)
[Mon May 14 23:33:41 2012] XMMSAS bgd. selection expression = annulus(33811.231995, 29646.938019, 2175.000000, 4350.000000, X, Y) && !ellipse(28892.269836, 27907.978790, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27530.442000, 32680.150000, 2814.864081, 2814.864081, 0.000000, X, Y) && !ellipse(29065.648000, 25877.406000, 1205.144035, 1205.144035, 0.000000, X, Y) && !ellipse(29749.013275, 28627.212952, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29319.462000, 30012.530000, 2688.560077, 2688.560077, 0.000000, X, Y) && !ellipse(31744.833200, 28938.059600, 388.615211, 388.615211, 0.000000, X, Y) && !ellipse(33314.696000, 33021.032000, 1703.552049, 1703.552049, 0.000000, X, Y) && !ellipse(28442.642000, 30397.420000, 1424.816041, 1424.816041, 0.000000, X, Y) && !ellipse(33728.450836, 31594.221466, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(34245.550000, 31415.692400, 1714.232049, 1714.232049, 0.000000, X, Y) && !ellipse(38083.216614, 34444.036987, 870.000000, 870.000000, 0.000000, X, Y)
[Mon May 14 23:33:41 2012] Writing fullrun_mos1_xmm0504260101_pi300-10000_pass1_cl_src71.gif
[Tue May 15 00:32:24 2012] Mean detx,y = (-3029.83, 7159.58) 
[Tue May 15 00:32:25 2012] Setting backscal keywords in source and bgd. spectrum
[Tue May 15 00:33:18 2012] Binned source spectrum to 10 counts/bin
[Tue May 15 00:33:18 2012] Setting source spectrum file to fullrun_mos1_xmm0504260101_pi300-10000_pass1_cl_src71_src_b10.pi.gz
[Tue May 15 00:33:18 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0504260101_pi300-10000_pass1_cl_src71_bgd.pi.gz
[Tue May 15 03:57:04 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue May 15 03:57:04 2012] rmf not generated due to insufficient counts
[Tue May 15 08:09:11 2012] Updating aperture counts using extracted products
[Tue May 15 08:09:11 2012] Error reading totcts from fullrun_mos1_xmm0504260101_pi300-10000_pass1_cl_src71_src_b10.pi.gz
[Tue May 15 08:09:13 2012] Calculating source flux in energy range 0.30-8.00
[Tue May 15 08:09:13 2012] Using photon index=1.80, rate=0.00267, arf fullrun_mos1_xmm0504260101_pi300-10000_pass1_cl_src71.arf
[Tue May 15 08:09:13 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 15 08:09:13 2012] Updating source flux to 3.2e-14
[Tue May 15 08:09:18 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting