[Tue May  8 09:26:03 2012] Detection parameters:
  Position = (285.2, 199.9) = 9 18 9.88 -12 14 31.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 123.1 +/- 21.3
  Background counts = 156.1
  Rate = 0.001 +/- 0.0002

[Tue May  8 09:26:07 2012] Off-axis axis estimate = 7.21'
[Tue May  8 23:48:26 2012] Using EEF radius (= 10.03 ")to estimate initial spatial extent for simple fitting
[Tue May  8 23:48:26 2012] Initial guess for spatial extent in simple fitting = 10.03"
[Tue May  8 23:48:26 2012] source mask rpix=2.3, npix_max = 31, mask sum = 36, frac = 1.143
[Tue May  8 23:48:26 2012] Giving source the simple spatial ID 68 for pass 0, mean size = 10.03"
[Thu May 10 02:09:27 2012] fullrun_mos1_xmm0504260101_pi300-10000_cl_pass0_src68.ximg exists
[Thu May 10 02:09:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504260101_pi300-10000_cl_pass0_src68.csv
[Thu May 10 02:09:27 2012] fullrun_mos1_xmm0504260101_pi300-10000_cl_pass0_src68_1.ximg exists
[Thu May 10 02:09:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504260101_pi300-10000_cl_pass0_src68.csv
[Thu May 10 02:09:27 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0504260101_pi300-10000_cl_pass0_src68_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0504260101_pi300-10000_cl_pass0_src68.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 10 02:09:29 2012] fullrun_mos1_xmm0504260101_pi300-10000_cl_pass0_tfrozen_src68.ximg exists
[Thu May 10 02:09:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504260101_pi300-10000_cl_pass0_tfrozen_src68.csv
[Thu May 10 02:09:29 2012] fullrun_mos1_xmm0504260101_pi300-10000_cl_pass0_tfrozen_src68_1.ximg exists
[Thu May 10 02:09:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504260101_pi300-10000_cl_pass0_tfrozen_src68.csv
[Thu May 10 02:09:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0504260101_pi300-10000_cl_pass0_tfrozen_src68_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0504260101_pi300-10000_cl_pass0_tfrozen_src68.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 10 09:29:25 2012] Source 60 is offset by -6.817712 and -4.804278 pixels which is larger than
2 X fitted extent = 1.398552 x 1.398552, not incorporating fit results
[Thu May 10 09:29:25 2012] Source 60 is offset by -0.229367 and -5.542599 pixels which is larger than
2 X fitted extent = 1.176703 x 1.176703, not incorporating fit results
[Thu May 10 09:29:25 2012] Vigneting correction estimate = 1.000000
[Thu May 10 09:29:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 10 09:29:25 2012] Assessing source extent using major
[Thu May 10 09:29:25 2012] Source does appear to be extended
[Thu May 10 09:29:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 10 09:29:25 2012] Deleting source due to low Poisson probability 0.9