[Tue May  8 09:25:51 2012] Detection parameters:
  Position = (249.1, 436.8) = 9 18 20.59 -11 57 20.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 242.9 +/- 27.1
  Background counts = 203.8
  Rate = 0.004 +/- 0.0004

[Tue May  8 09:26:07 2012] Off-axis axis estimate = 10.65'
[Tue May  8 23:48:26 2012] Using EEF radius (= 11.75 ")to estimate initial spatial extent for simple fitting
[Tue May  8 23:48:26 2012] Initial guess for spatial extent in simple fitting = 11.75"
[Tue May  8 23:48:26 2012] source mask rpix=2.7, npix_max = 41, mask sum = 36, frac = 0.878
[Tue May  8 23:48:26 2012] Giving source the simple spatial ID 29 for pass 0, mean size = 11.75"
[Thu May 10 02:09:26 2012] fullrun_mos1_xmm0504260101_pi300-10000_cl_pass0_src29.ximg exists
[Thu May 10 02:09:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504260101_pi300-10000_cl_pass0_src29.csv
[Thu May 10 02:09:26 2012] fullrun_mos1_xmm0504260101_pi300-10000_cl_pass0_src29_1.ximg exists
[Thu May 10 02:09:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504260101_pi300-10000_cl_pass0_src29.csv
[Thu May 10 02:09:26 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0504260101_pi300-10000_cl_pass0_src29_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0504260101_pi300-10000_cl_pass0_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 10 02:09:28 2012] fullrun_mos1_xmm0504260101_pi300-10000_cl_pass0_tfrozen_src29.ximg exists
[Thu May 10 02:09:28 2012] fullrun_mos1_xmm0504260101_pi300-10000_cl_pass0_tfrozen_src29_1.ximg exists
[Thu May 10 02:09:28 2012] Fit fullrun_mos1_xmm0504260101_pi300-10000_cl_pass0_tfrozen_src29 appears to have run properly
[Thu May 10 09:29:24 2012] Source 6 is offset by 6.207756 and 7.585267 pixels which is larger than
2 X fitted extent = 1.610311 x 1.610311, not incorporating fit results
[Thu May 10 09:29:25 2012] Vigneting correction estimate = 1.000000
[Thu May 10 09:29:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 10 09:29:25 2012] Assessing source extent using major
[Thu May 10 09:29:25 2012] Source does appear to be extended
[Thu May 10 09:29:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 10 21:17:46 2012] Using EEF radius (= 11.75 ")to estimate initial spatial extent for simple fitting
[Thu May 10 21:17:46 2012] Initial guess for spatial extent in simple fitting = 11.75"
[Thu May 10 21:17:46 2012] source mask rpix=2.7, npix_max = 41, mask sum = 36, frac = 0.878
[Thu May 10 21:17:46 2012] Giving source the simple spatial ID 28 for pass 1, mean size = 11.75"
[Fri May 11 21:10:07 2012] fullrun_mos1_xmm0504260101_pi300-10000_cl_pass1_src28.ximg exists
[Fri May 11 21:10:07 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0504260101_pi300-10000_cl_pass1_src28.csv
[Fri May 11 21:10:07 2012] fullrun_mos1_xmm0504260101_pi300-10000_cl_pass1_src28_1.ximg exists
[Fri May 11 21:10:07 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0504260101_pi300-10000_cl_pass1_src28.csv
[Fri May 11 21:10:07 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0504260101_pi300-10000_cl_pass1_src28_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0504260101_pi300-10000_cl_pass1_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 11 21:10:08 2012] fullrun_mos1_xmm0504260101_pi300-10000_cl_pass1_tfrozen_src28.ximg exists
[Fri May 11 21:10:08 2012] fullrun_mos1_xmm0504260101_pi300-10000_cl_pass1_tfrozen_src28_1.ximg exists
[Fri May 11 21:10:08 2012] Fit fullrun_mos1_xmm0504260101_pi300-10000_cl_pass1_tfrozen_src28 appears to have run properly
[Sat May 12 02:47:30 2012] Warning: source 28 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 6 at 14.743473 pixels away
[Sat May 12 02:47:30 2012] Vigneting correction estimate = 1.000000
[Sat May 12 02:47:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 12 02:47:30 2012] Assessing source extent using major
[Sat May 12 02:47:30 2012] Source does appear to be extended
[Sat May 12 02:47:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 14 23:33:41 2012] XMMSAS src. selection expression = ellipse(21619.350739, 37953.412231, 652.500000, 652.500000, 0.000000, X, Y)
[Mon May 14 23:33:41 2012] Writing source region out to fullrun_mos1_xmm0504260101_pi300-10000_pass1_cl_src6_src.reg
[Mon May 14 23:33:41 2012] Extracting stamp from image fullrun_mos1_xmm0504260101_pi300-10000_cl_sm2.00.img.gz, (212, 399) - (287, 474)
[Mon May 14 23:33:41 2012] XMMSAS bgd. selection expression = annulus(21619.350739, 37953.412231, 1087.500000, 2175.000000, X, Y) && !ellipse(24233.750122, 39321.230225, 870.000000, 870.000000, 0.000000, X, Y)
[Mon May 14 23:33:41 2012] Writing fullrun_mos1_xmm0504260101_pi300-10000_pass1_cl_src6.gif
[Tue May 15 00:28:28 2012] Mean detx,y = (10815.07, 2307.18) 
[Tue May 15 00:28:29 2012] Setting backscal keywords in source and bgd. spectrum
[Tue May 15 00:28:40 2012] Binned source spectrum to 10 counts/bin
[Tue May 15 00:28:40 2012] Setting source spectrum file to fullrun_mos1_xmm0504260101_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Tue May 15 00:28:40 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0504260101_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Tue May 15 03:30:26 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue May 15 03:30:26 2012] rmf not generated due to insufficient counts
[Tue May 15 08:09:10 2012] Updating aperture counts using extracted products
[Tue May 15 08:09:10 2012] Error reading totcts from fullrun_mos1_xmm0504260101_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Tue May 15 08:09:12 2012] Calculating source flux in energy range 0.30-8.00
[Tue May 15 08:09:12 2012] Using photon index=1.80, rate=0.00369, arf fullrun_mos1_xmm0504260101_pi300-10000_pass1_cl_src6.arf
[Tue May 15 08:09:12 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 15 08:09:12 2012] Updating source flux to 6.3e-14
[Tue May 15 08:09:18 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting