[Tue May  8 09:26:02 2012] Detection parameters:
  Position = (270.9, 221.0) = 9 18 14.12 -12 12 59.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 87.3 +/- 21.1
  Background counts = 179.5
  Rate = 0.001 +/- 0.0003

[Tue May  8 09:26:07 2012] Off-axis axis estimate = 5.96'
[Tue May  8 23:48:26 2012] Using EEF radius (= 9.41 ")to estimate initial spatial extent for simple fitting
[Tue May  8 23:48:26 2012] Initial guess for spatial extent in simple fitting = 9.41"
[Tue May  8 23:48:26 2012] source mask rpix=2.2, npix_max = 28, mask sum = 36, frac = 1.269
[Tue May  8 23:48:26 2012] Giving source the simple spatial ID 60 for pass 0, mean size = 9.41"
[Thu May 10 02:09:27 2012] fullrun_mos1_xmm0504260101_pi300-10000_cl_pass0_src60.ximg exists
[Thu May 10 02:09:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504260101_pi300-10000_cl_pass0_src60.csv
[Thu May 10 02:09:27 2012] fullrun_mos1_xmm0504260101_pi300-10000_cl_pass0_src60_1.ximg exists
[Thu May 10 02:09:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504260101_pi300-10000_cl_pass0_src60.csv
[Thu May 10 02:09:27 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0504260101_pi300-10000_cl_pass0_src60_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0504260101_pi300-10000_cl_pass0_src60.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 10 02:09:28 2012] fullrun_mos1_xmm0504260101_pi300-10000_cl_pass0_tfrozen_src60.ximg exists
[Thu May 10 02:09:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504260101_pi300-10000_cl_pass0_tfrozen_src60.csv
[Thu May 10 02:09:28 2012] fullrun_mos1_xmm0504260101_pi300-10000_cl_pass0_tfrozen_src60_1.ximg exists
[Thu May 10 02:09:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504260101_pi300-10000_cl_pass0_tfrozen_src60.csv
[Thu May 10 02:09:28 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0504260101_pi300-10000_cl_pass0_tfrozen_src60_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0504260101_pi300-10000_cl_pass0_tfrozen_src60.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 10 09:29:25 2012] Warning, spatial fit 60 centroid is now closest to src. 54
[Thu May 10 09:29:25 2012] Vigneting correction estimate = 1.000000
[Thu May 10 09:29:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 10 09:29:25 2012] Assessing source extent using major
[Thu May 10 09:29:25 2012] Source does appear to be extended
[Thu May 10 09:29:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 10 09:29:25 2012] Deleting source due to low Poisson probability 0.9