[Tue May  8 09:26:01 2012] Detection parameters:
  Position = (287.8, 224.4) = 9 18 9.11 -12 12 43.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 129.1 +/- 23.6
  Background counts = 203.9
  Rate = 0.002 +/- 0.0003

[Tue May  8 09:26:07 2012] Off-axis axis estimate = 5.42'
[Tue May  8 23:48:26 2012] Using EEF radius (= 9.14 ")to estimate initial spatial extent for simple fitting
[Tue May  8 23:48:26 2012] Initial guess for spatial extent in simple fitting = 9.14"
[Tue May  8 23:48:26 2012] source mask rpix=2.1, npix_max = 27, mask sum = 25, frac = 0.924
[Tue May  8 23:48:26 2012] Giving source the simple spatial ID 46 for pass 0, mean size = 9.14"
[Thu May 10 02:09:27 2012] fullrun_mos1_xmm0504260101_pi300-10000_cl_pass0_src46.ximg exists
[Thu May 10 02:09:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504260101_pi300-10000_cl_pass0_src46.csv
[Thu May 10 02:09:27 2012] fullrun_mos1_xmm0504260101_pi300-10000_cl_pass0_src46_1.ximg exists
[Thu May 10 02:09:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504260101_pi300-10000_cl_pass0_src46.csv
[Thu May 10 02:09:27 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0504260101_pi300-10000_cl_pass0_src46_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0504260101_pi300-10000_cl_pass0_src46.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 10 02:09:28 2012] fullrun_mos1_xmm0504260101_pi300-10000_cl_pass0_tfrozen_src46.ximg exists
[Thu May 10 02:09:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504260101_pi300-10000_cl_pass0_tfrozen_src46.csv
[Thu May 10 02:09:28 2012] fullrun_mos1_xmm0504260101_pi300-10000_cl_pass0_tfrozen_src46_1.ximg exists
[Thu May 10 02:09:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504260101_pi300-10000_cl_pass0_tfrozen_src46.csv
[Thu May 10 02:09:28 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0504260101_pi300-10000_cl_pass0_tfrozen_src46_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0504260101_pi300-10000_cl_pass0_tfrozen_src46.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 10 09:29:25 2012] Source 52 is offset by -5.271567 and 5.632604 pixels which is larger than
2 X fitted extent = 1.118331 x 1.118331, not incorporating fit results
[Thu May 10 09:29:25 2012] Vigneting correction estimate = 1.000000
[Thu May 10 09:29:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 10 09:29:25 2012] Assessing source extent using major
[Thu May 10 09:29:25 2012] Source does appear to be extended
[Thu May 10 09:29:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 10 09:29:25 2012] Deleting source due to low Poisson probability 0.9