[Tue May  8 09:26:01 2012] Detection parameters:
  Position = (291.9, 292.1) = 9 18 7.88 -12 7 50.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1333.5 +/- 66.9
  Background counts = 893.0
  Rate = 0.01 +/- 0.0006

[Tue May  8 09:26:07 2012] Off-axis axis estimate = 0.66'
[Tue May  8 23:48:26 2012] Using EEF radius (= 6.76 ")to estimate initial spatial extent for simple fitting
[Tue May  8 23:48:26 2012] Initial guess for spatial extent in simple fitting = 6.76"
[Tue May  8 23:48:26 2012] source mask rpix=1.6, npix_max = 16, mask sum = 16, frac = 0.948
[Tue May  8 23:48:26 2012] Giving source the simple spatial ID 7 for pass 0, mean size = 6.76"
[Thu May 10 02:09:26 2012] fullrun_mos1_xmm0504260101_pi300-10000_cl_pass0_src7.ximg exists
[Thu May 10 02:09:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504260101_pi300-10000_cl_pass0_src7.csv
[Thu May 10 02:09:26 2012] fullrun_mos1_xmm0504260101_pi300-10000_cl_pass0_src7_1.ximg exists
[Thu May 10 02:09:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504260101_pi300-10000_cl_pass0_src7.csv
[Thu May 10 02:09:26 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0504260101_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0504260101_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 10 02:09:27 2012] fullrun_mos1_xmm0504260101_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Thu May 10 02:09:27 2012] fullrun_mos1_xmm0504260101_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Thu May 10 02:09:27 2012] Fit fullrun_mos1_xmm0504260101_pi300-10000_cl_pass0_tfrozen_src7 appears to have run properly
[Thu May 10 09:29:24 2012] Spatial fit model total counts = 14478.300000, observed total counts = 14469.000000
[Thu May 10 09:29:24 2012] Offset between fit and detection position for source 49 = 5.118479 pixels
[Thu May 10 09:29:24 2012] 14914.427000 total counts/ 14188.300000 bgd. counts: snr = 6.096034
Spatial fit parameters:
  Offset between fit and detection position for source 49 = 5.118479 pixels
  Position = (289.6, 287.5) = 9 18 8.56 -12 8 11.1
  Extent = 13.5 (13.5-27.0)", rotation angle = 0
  Source counts = 726.1 +/- 122.1
  Background counts = 14188.3
  Rate = 0.007 +/- 0.001
[Thu May 10 09:29:25 2012] Vigneting correction estimate = 1.000000
[Thu May 10 09:29:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 10 09:29:25 2012] Assessing source extent using major axis lower bound
[Thu May 10 09:29:25 2012] Source does appear to be extended
[Thu May 10 09:29:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 10 21:17:46 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu May 10 21:17:46 2012] Initial guess for spatial extent in simple fitting = 13.52"
[Thu May 10 21:17:46 2012] source mask rpix=3.1, npix_max = 52, mask sum = 49, frac = 0.941
[Thu May 10 21:17:46 2012] Giving source the simple spatial ID 7 for pass 1, mean size = 13.52"
[Fri May 11 21:10:06 2012] fullrun_mos1_xmm0504260101_pi300-10000_cl_pass1_src7.ximg exists
[Fri May 11 21:10:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504260101_pi300-10000_cl_pass1_src7.csv
[Fri May 11 21:10:06 2012] fullrun_mos1_xmm0504260101_pi300-10000_cl_pass1_src7_1.ximg exists
[Fri May 11 21:10:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504260101_pi300-10000_cl_pass1_src7.csv
[Fri May 11 21:10:06 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0504260101_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0504260101_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 11 21:10:08 2012] fullrun_mos1_xmm0504260101_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Fri May 11 21:10:08 2012] fullrun_mos1_xmm0504260101_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Fri May 11 21:10:08 2012] Fit fullrun_mos1_xmm0504260101_pi300-10000_cl_pass1_tfrozen_src7 appears to have run properly
[Sat May 12 02:47:30 2012] Warning, spatial fit 7 centroid is now closest to src. 41
[Sat May 12 02:47:30 2012] Vigneting correction estimate = 1.000000
[Sat May 12 02:47:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 12 02:47:30 2012] Assessing source extent using major axis lower bound
[Sat May 12 02:47:30 2012] Source does appear to be extended
[Sat May 12 02:47:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 14 23:33:40 2012] XMMSAS src. selection expression = ellipse(25149.044000, 24965.102000, 811.002023, 811.002023, 0.000000, X, Y)
[Mon May 14 23:33:40 2012] Writing source region out to fullrun_mos1_xmm0504260101_pi300-10000_pass1_cl_src49_src.reg
[Mon May 14 23:33:40 2012] Extracting stamp from image fullrun_mos1_xmm0504260101_pi300-10000_cl_sm2.00.img.gz, (243, 241) - (336, 334)
[Mon May 14 23:33:40 2012] XMMSAS bgd. selection expression = annulus(25149.044000, 24965.102000, 1351.670039, 2703.340078, X, Y) && !ellipse(25813.695800, 28052.363600, 3479.040100, 3479.040100, 0.000000, X, Y) && !ellipse(24167.568000, 25001.714000, 1133.344033, 1133.344033, 0.000000, X, Y) && !ellipse(27282.934000, 25651.996000, 1739.360050, 1739.360050, 162.612864, X, Y) && !ellipse(26372.057617, 24844.361725, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29319.462000, 30012.530000, 2688.560077, 2688.560077, 0.000000, X, Y) && !ellipse(23747.514000, 25536.212000, 1214.824035, 1214.824035, 0.000000, X, Y) && !ellipse(23100.914000, 28483.100400, 1095.432032, 1095.432032, 0.000000, X, Y) && !ellipse(22736.133057, 27179.146698, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28175.906000, 24331.414000, 1189.232034, 1189.232034, 0.000000, X, Y) && !ellipse(25871.249200, 23630.294000, 1150.936033, 1150.936033, 0.000000, X, Y) && !ellipse(28051.644000, 25763.208000, 1211.728035, 1211.728035, 0.000000, X, Y) && !ellipse(22917.296000, 24500.550000, 1214.312035, 1214.312035, 0.000000, X, Y) && !ellipse(22138.776000, 28504.352600, 2190.864063, 2190.864063, 0.000000, X, Y) && !ellipse(26815.763458, 23905.747803, 870.000000, 870.000000, 0.000000, X, Y)
[Mon May 14 23:33:40 2012] Writing fullrun_mos1_xmm0504260101_pi300-10000_pass1_cl_src49.gif
[Mon May 14 23:51:45 2012] Mean detx,y = (-1666.13, -2496.53) 
[Mon May 14 23:51:47 2012] Setting backscal keywords in source and bgd. spectrum
[Mon May 14 23:51:59 2012] Binned source spectrum to 10 counts/bin
[Mon May 14 23:51:59 2012] Setting source spectrum file to fullrun_mos1_xmm0504260101_pi300-10000_pass1_cl_src49_src_b10.pi.gz
[Mon May 14 23:51:59 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0504260101_pi300-10000_pass1_cl_src49_bgd.pi.gz
[Tue May 15 08:09:09 2012] Updating aperture counts using extracted products
[Tue May 15 08:09:09 2012] Error reading totcts from fullrun_mos1_xmm0504260101_pi300-10000_pass1_cl_src49_src_b10.pi.gz
[Tue May 15 08:09:11 2012] Calculating source flux in energy range 0.30-8.00
[Tue May 15 08:09:11 2012] Using photon index=1.80, rate=0.00688, arf fullrun_mos1_xmm0504260101_pi300-10000_pass1_cl_src49.arf
[Tue May 15 08:09:11 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 15 08:09:12 2012] Updating source flux to 6.9e-14