[Tue May  8 09:26:01 2012] Detection parameters:
  Position = (308.8, 275.3) = 9 18 2.88 -12 9 4.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 181.3 +/- 36.7
  Background counts = 628.6
  Rate = 0.002 +/- 0.0004

[Tue May  8 09:26:07 2012] Off-axis axis estimate = 1.84'
[Tue May  8 23:48:26 2012] Using EEF radius (= 7.35 ")to estimate initial spatial extent for simple fitting
[Tue May  8 23:48:26 2012] Initial guess for spatial extent in simple fitting = 7.35"
[Tue May  8 23:48:26 2012] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.044
[Tue May  8 23:48:26 2012] Giving source the simple spatial ID 48 for pass 0, mean size = 7.35"
[Thu May 10 02:09:27 2012] fullrun_mos1_xmm0504260101_pi300-10000_cl_pass0_src48.ximg exists
[Thu May 10 02:09:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504260101_pi300-10000_cl_pass0_src48.csv
[Thu May 10 02:09:27 2012] fullrun_mos1_xmm0504260101_pi300-10000_cl_pass0_src48_1.ximg exists
[Thu May 10 02:09:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504260101_pi300-10000_cl_pass0_src48.csv
[Thu May 10 02:09:27 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0504260101_pi300-10000_cl_pass0_src48_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0504260101_pi300-10000_cl_pass0_src48.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 10 02:09:28 2012] fullrun_mos1_xmm0504260101_pi300-10000_cl_pass0_tfrozen_src48.ximg exists
[Thu May 10 02:09:28 2012] fullrun_mos1_xmm0504260101_pi300-10000_cl_pass0_tfrozen_src48_1.ximg exists
[Thu May 10 02:09:28 2012] Fit fullrun_mos1_xmm0504260101_pi300-10000_cl_pass0_tfrozen_src48 appears to have run properly
[Thu May 10 09:29:24 2012] Source 48 is offset by 0.214982 and -5.319542 pixels which is larger than
2 X fitted extent = 0.794680 x 0.794680, not incorporating fit results
[Thu May 10 09:29:25 2012] Warning, spatial fit 48 centroid is now closest to src. 47
[Thu May 10 09:29:25 2012] Vigneting correction estimate = 1.000000
[Thu May 10 09:29:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 10 09:29:25 2012] Assessing source extent using major
[Thu May 10 09:29:25 2012] Source does appear to be extended
[Thu May 10 09:29:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 10 21:17:46 2012] Using EEF radius (= 7.35 ")to estimate initial spatial extent for simple fitting
[Thu May 10 21:17:46 2012] Initial guess for spatial extent in simple fitting = 7.35"
[Thu May 10 21:17:46 2012] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.044
[Thu May 10 21:17:46 2012] Giving source the simple spatial ID 46 for pass 1, mean size = 7.35"
[Fri May 11 21:10:07 2012] fullrun_mos1_xmm0504260101_pi300-10000_cl_pass1_src46.ximg exists
[Fri May 11 21:10:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504260101_pi300-10000_cl_pass1_src46.csv
[Fri May 11 21:10:07 2012] fullrun_mos1_xmm0504260101_pi300-10000_cl_pass1_src46_1.ximg exists
[Fri May 11 21:10:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504260101_pi300-10000_cl_pass1_src46.csv
[Fri May 11 21:10:07 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0504260101_pi300-10000_cl_pass1_src46_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0504260101_pi300-10000_cl_pass1_src46.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 11 21:10:08 2012] fullrun_mos1_xmm0504260101_pi300-10000_cl_pass1_tfrozen_src46.ximg exists
[Fri May 11 21:10:08 2012] fullrun_mos1_xmm0504260101_pi300-10000_cl_pass1_tfrozen_src46_1.ximg exists
[Fri May 11 21:10:08 2012] Fit fullrun_mos1_xmm0504260101_pi300-10000_cl_pass1_tfrozen_src46 appears to have run properly
[Sat May 12 02:47:30 2012] Source 48 is offset by 0.218431 and -5.328301 pixels which is larger than
2 X fitted extent = 0.794680 x 0.794680, not incorporating fit results
[Sat May 12 02:47:30 2012] Warning, spatial fit 46 centroid is now closest to src. 47
[Sat May 12 02:47:30 2012] Vigneting correction estimate = 1.000000
[Sat May 12 02:47:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 12 02:47:30 2012] Assessing source extent using major
[Sat May 12 02:47:30 2012] Source does appear to be extended
[Sat May 12 02:47:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 14 23:33:42 2012] XMMSAS src. selection expression = ellipse(26815.763458, 23905.747803, 652.500000, 652.500000, 0.000000, X, Y)
[Mon May 14 23:33:42 2012] Writing source region out to fullrun_mos1_xmm0504260101_pi300-10000_pass1_cl_src48_src.reg
[Mon May 14 23:33:42 2012] Extracting stamp from image fullrun_mos1_xmm0504260101_pi300-10000_cl_sm2.00.img.gz, (271, 238) - (346, 313)
[Mon May 14 23:33:42 2012] XMMSAS bgd. selection expression = annulus(26815.763458, 23905.747803, 1087.500000, 2175.000000, X, Y) && !ellipse(25813.695800, 28052.363600, 3479.040100, 3479.040100, 0.000000, X, Y) && !ellipse(25149.044000, 24965.102000, 1081.336031, 1081.336031, 0.000000, X, Y) && !ellipse(24167.568000, 25001.714000, 1133.344033, 1133.344033, 0.000000, X, Y) && !ellipse(27282.934000, 25651.996000, 1739.360050, 1739.360050, 162.612864, X, Y) && !ellipse(29065.648000, 25877.406000, 1205.144035, 1205.144035, 0.000000, X, Y) && !ellipse(26372.057617, 24844.361725, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23747.514000, 25536.212000, 1214.824035, 1214.824035, 0.000000, X, Y) && !ellipse(28175.906000, 24331.414000, 1189.232034, 1189.232034, 0.000000, X, Y) && !ellipse(25871.249200, 23630.294000, 1150.936033, 1150.936033, 0.000000, X, Y) && !ellipse(28051.644000, 25763.208000, 1211.728035, 1211.728035, 0.000000, X, Y)
[Mon May 14 23:33:42 2012] Writing fullrun_mos1_xmm0504260101_pi300-10000_pass1_cl_src48.gif
[Tue May 15 00:50:50 2012] Mean detx,y = (-3501.27, -1821.74) 
[Tue May 15 00:50:51 2012] Setting backscal keywords in source and bgd. spectrum
[Tue May 15 00:51:03 2012] Binned source spectrum to 10 counts/bin
[Tue May 15 00:51:03 2012] Setting source spectrum file to fullrun_mos1_xmm0504260101_pi300-10000_pass1_cl_src48_src_b10.pi.gz
[Tue May 15 00:51:03 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0504260101_pi300-10000_pass1_cl_src48_bgd.pi.gz
[Tue May 15 04:30:28 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue May 15 04:30:28 2012] rmf not generated due to insufficient counts
[Tue May 15 08:09:11 2012] Updating aperture counts using extracted products
[Tue May 15 08:09:11 2012] Error reading totcts from fullrun_mos1_xmm0504260101_pi300-10000_pass1_cl_src48_src_b10.pi.gz
[Tue May 15 08:09:13 2012] Calculating source flux in energy range 0.30-8.00
[Tue May 15 08:09:13 2012] Using photon index=1.80, rate=0.00175, arf fullrun_mos1_xmm0504260101_pi300-10000_pass1_cl_src48.arf
[Tue May 15 08:09:13 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 15 08:09:13 2012] Updating source flux to 2e-14
[Tue May 15 08:09:18 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting