[Tue May  8 09:25:58 2012] Detection parameters:
  Position = (332.7, 321.3) = 9 17 55.80 -12 5 36.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 939.9 +/- 57.9
  Background counts = 742.8
  Rate = 0.009 +/- 0.0006

[Tue May  8 09:26:07 2012] Off-axis axis estimate = 2.99'
[Tue May  8 23:48:26 2012] Using EEF radius (= 7.92 ")to estimate initial spatial extent for simple fitting
[Tue May  8 23:48:26 2012] Initial guess for spatial extent in simple fitting = 7.92"
[Tue May  8 23:48:26 2012] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.928
[Tue May  8 23:48:26 2012] Giving source the simple spatial ID 10 for pass 0, mean size = 7.92"
[Thu May 10 02:09:26 2012] fullrun_mos1_xmm0504260101_pi300-10000_cl_pass0_src10.ximg exists
[Thu May 10 02:09:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504260101_pi300-10000_cl_pass0_src10.csv
[Thu May 10 02:09:26 2012] fullrun_mos1_xmm0504260101_pi300-10000_cl_pass0_src10_1.ximg exists
[Thu May 10 02:09:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504260101_pi300-10000_cl_pass0_src10.csv
[Thu May 10 02:09:26 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0504260101_pi300-10000_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0504260101_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 10 02:09:27 2012] fullrun_mos1_xmm0504260101_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Thu May 10 02:09:27 2012] fullrun_mos1_xmm0504260101_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Thu May 10 02:09:27 2012] Fit fullrun_mos1_xmm0504260101_pi300-10000_cl_pass0_tfrozen_src10 appears to have run properly
[Thu May 10 09:29:24 2012] Source 35 is offset by 6.936297 and -2.779285 pixels which is larger than
2 X fitted extent = 2.953425 x 2.953425, not incorporating fit results
[Thu May 10 09:29:25 2012] Vigneting correction estimate = 1.000000
[Thu May 10 09:29:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 10 09:29:25 2012] Assessing source extent using major
[Thu May 10 09:29:25 2012] Source does appear to be extended
[Thu May 10 09:29:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 10 21:17:46 2012] Using EEF radius (= 7.92 ")to estimate initial spatial extent for simple fitting
[Thu May 10 21:17:46 2012] Initial guess for spatial extent in simple fitting = 7.92"
[Thu May 10 21:17:46 2012] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.928
[Thu May 10 21:17:46 2012] Giving source the simple spatial ID 9 for pass 1, mean size = 7.92"
[Fri May 11 21:10:06 2012] fullrun_mos1_xmm0504260101_pi300-10000_cl_pass1_src9.ximg exists
[Fri May 11 21:10:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504260101_pi300-10000_cl_pass1_src9.csv
[Fri May 11 21:10:06 2012] fullrun_mos1_xmm0504260101_pi300-10000_cl_pass1_src9_1.ximg exists
[Fri May 11 21:10:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504260101_pi300-10000_cl_pass1_src9.csv
[Fri May 11 21:10:06 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0504260101_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0504260101_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 11 21:10:08 2012] fullrun_mos1_xmm0504260101_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Fri May 11 21:10:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504260101_pi300-10000_cl_pass1_tfrozen_src9.csv
[Fri May 11 21:10:08 2012] fullrun_mos1_xmm0504260101_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Fri May 11 21:10:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504260101_pi300-10000_cl_pass1_tfrozen_src9.csv
[Fri May 11 21:10:08 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0504260101_pi300-10000_cl_pass1_tfrozen_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0504260101_pi300-10000_cl_pass1_tfrozen_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 12 02:47:30 2012] Spatial fit model total counts = 13224.800000, observed total counts = 10974.000000
[Sat May 12 02:47:30 2012] Poor agreement between spatial fit and data for source 35
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat May 12 02:47:30 2012] Vigneting correction estimate = 1.000000
[Sat May 12 02:47:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 12 02:47:30 2012] Assessing source extent using major
[Sat May 12 02:47:30 2012] Source does appear to be extended
[Sat May 12 02:47:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 14 23:33:40 2012] XMMSAS src. selection expression = ellipse(28892.269836, 27907.978790, 652.500000, 652.500000, 0.000000, X, Y)
[Mon May 14 23:33:40 2012] Writing source region out to fullrun_mos1_xmm0504260101_pi300-10000_pass1_cl_src35_src.reg
[Mon May 14 23:33:40 2012] Extracting stamp from image fullrun_mos1_xmm0504260101_pi300-10000_cl_sm2.00.img.gz, (295, 284) - (370, 359)
[Mon May 14 23:33:40 2012] XMMSAS bgd. selection expression = annulus(28892.269836, 27907.978790, 1087.500000, 2175.000000, X, Y) && !ellipse(25813.695800, 28052.363600, 3479.040100, 3479.040100, 0.000000, X, Y) && !ellipse(28407.114000, 29509.173400, 958.272028, 958.272028, 0.000000, X, Y) && !ellipse(26073.462000, 30533.494000, 1186.784034, 1186.784034, 0.000000, X, Y) && !ellipse(26769.406647, 30861.828979, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27530.442000, 32680.150000, 2814.864081, 2814.864081, 0.000000, X, Y) && !ellipse(27282.934000, 25651.996000, 1739.360050, 1739.360050, 162.612864, X, Y) && !ellipse(29065.648000, 25877.406000, 1205.144035, 1205.144035, 0.000000, X, Y) && !ellipse(29749.013275, 28627.212952, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29319.462000, 30012.530000, 2688.560077, 2688.560077, 0.000000, X, Y) && !ellipse(28442.642000, 30397.420000, 1424.816041, 1424.816041, 0.000000, X, Y) && !ellipse(28051.644000, 25763.208000, 1211.728035, 1211.728035, 0.000000, X, Y)
[Mon May 14 23:33:40 2012] Writing fullrun_mos1_xmm0504260101_pi300-10000_pass1_cl_src35.gif
[Mon May 14 23:55:13 2012] Mean detx,y = (-1532.66, 2148.59) 
[Mon May 14 23:55:15 2012] Setting backscal keywords in source and bgd. spectrum
[Mon May 14 23:55:28 2012] Binned source spectrum to 10 counts/bin
[Mon May 14 23:55:28 2012] Setting source spectrum file to fullrun_mos1_xmm0504260101_pi300-10000_pass1_cl_src35_src_b10.pi.gz
[Mon May 14 23:55:28 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0504260101_pi300-10000_pass1_cl_src35_bgd.pi.gz
[Tue May 15 02:23:19 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue May 15 02:23:19 2012] rmf not generated due to insufficient counts
[Tue May 15 08:09:10 2012] Updating aperture counts using extracted products
[Tue May 15 08:09:10 2012] Error reading totcts from fullrun_mos1_xmm0504260101_pi300-10000_pass1_cl_src35_src_b10.pi.gz
[Tue May 15 08:09:12 2012] Calculating source flux in energy range 0.30-8.00
[Tue May 15 08:09:12 2012] Using photon index=1.80, rate=0.00931, arf fullrun_mos1_xmm0504260101_pi300-10000_pass1_cl_src35.arf
[Tue May 15 08:09:12 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 15 08:09:12 2012] Updating source flux to 9.5e-14
[Tue May 15 08:09:18 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting