[Tue May  8 09:25:57 2012] Detection parameters:
  Position = (251.2, 334.1) = 9 18 19.96 -12 4 46.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 196.4 +/- 34.8
  Background counts = 591.3
  Rate = 0.002 +/- 0.0003

[Tue May  8 09:26:07 2012] Off-axis axis estimate = 4.29'
[Tue May  8 23:48:26 2012] Using EEF radius (= 8.57 ")to estimate initial spatial extent for simple fitting
[Tue May  8 23:48:26 2012] Initial guess for spatial extent in simple fitting = 8.57"
[Tue May  8 23:48:26 2012] source mask rpix=2.0, npix_max = 24, mask sum = 24, frac = 0.983
[Tue May  8 23:48:26 2012] Giving source the simple spatial ID 44 for pass 0, mean size = 8.57"
[Thu May 10 02:09:27 2012] fullrun_mos1_xmm0504260101_pi300-10000_cl_pass0_src44.ximg exists
[Thu May 10 02:09:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504260101_pi300-10000_cl_pass0_src44.csv
[Thu May 10 02:09:27 2012] fullrun_mos1_xmm0504260101_pi300-10000_cl_pass0_src44_1.ximg exists
[Thu May 10 02:09:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504260101_pi300-10000_cl_pass0_src44.csv
[Thu May 10 02:09:27 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0504260101_pi300-10000_cl_pass0_src44_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0504260101_pi300-10000_cl_pass0_src44.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 10 02:09:28 2012] fullrun_mos1_xmm0504260101_pi300-10000_cl_pass0_tfrozen_src44.ximg exists
[Thu May 10 02:09:28 2012] fullrun_mos1_xmm0504260101_pi300-10000_cl_pass0_tfrozen_src44_1.ximg exists
[Thu May 10 02:09:28 2012] Fit fullrun_mos1_xmm0504260101_pi300-10000_cl_pass0_tfrozen_src44 appears to have run properly
[Thu May 10 09:29:25 2012] Warning, spatial fit 44 centroid is now closest to src. 28
[Thu May 10 09:29:25 2012] Vigneting correction estimate = 1.000000
[Thu May 10 09:29:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 10 09:29:25 2012] Assessing source extent using major
[Thu May 10 09:29:25 2012] Source does appear to be extended
[Thu May 10 09:29:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 10 21:17:46 2012] Using EEF radius (= 8.57 ")to estimate initial spatial extent for simple fitting
[Thu May 10 21:17:46 2012] Initial guess for spatial extent in simple fitting = 8.57"
[Thu May 10 21:17:46 2012] source mask rpix=2.0, npix_max = 24, mask sum = 24, frac = 0.983
[Thu May 10 21:17:46 2012] Giving source the simple spatial ID 43 for pass 1, mean size = 8.57"
[Fri May 11 21:10:07 2012] fullrun_mos1_xmm0504260101_pi300-10000_cl_pass1_src43.ximg exists
[Fri May 11 21:10:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504260101_pi300-10000_cl_pass1_src43.csv
[Fri May 11 21:10:07 2012] fullrun_mos1_xmm0504260101_pi300-10000_cl_pass1_src43_1.ximg exists
[Fri May 11 21:10:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504260101_pi300-10000_cl_pass1_src43.csv
[Fri May 11 21:10:07 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0504260101_pi300-10000_cl_pass1_src43_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0504260101_pi300-10000_cl_pass1_src43.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 11 21:10:08 2012] fullrun_mos1_xmm0504260101_pi300-10000_cl_pass1_tfrozen_src43.ximg exists
[Fri May 11 21:10:08 2012] fullrun_mos1_xmm0504260101_pi300-10000_cl_pass1_tfrozen_src43_1.ximg exists
[Fri May 11 21:10:08 2012] Fit fullrun_mos1_xmm0504260101_pi300-10000_cl_pass1_tfrozen_src43 appears to have run properly
[Sat May 12 02:47:30 2012] Spatial fit model total counts = 12508.100000, observed total counts = 12268.000000
[Sat May 12 02:47:30 2012] Offset between fit and detection position for source 30 = 7.038062 pixels
[Sat May 12 02:47:30 2012] Warning, changing simple spatial fit ID from 43 to 32
[Sat May 12 02:47:30 2012] 12617.550000 total counts/ 11485.700000 bgd. counts: snr = 10.561124
Spatial fit parameters:
  Offset between fit and detection position for source 30 = 7.038062 pixels
  Position = (255.0, 328.2) = 9 18 18.82 -12 5 14.1
  Extent = 27.4 (18.4-54.8)", rotation angle = 0
  Source counts = 1131.8 +/- 112.3
  Background counts = 11485.7
  Rate = 0.01 +/- 0.001
[Sat May 12 02:47:30 2012] Vigneting correction estimate = 1.000000
[Sat May 12 02:47:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 12 02:47:30 2012] Assessing source extent using major axis lower bound
[Sat May 12 02:47:30 2012] Source does appear to be extended
[Sat May 12 02:47:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 12 02:47:30 2012] Source is confused with source 28
[Mon May 14 23:33:41 2012] Counts = 1131.850000, rescaling region sizes by 2.000000
[Mon May 14 23:33:41 2012] XMMSAS src. selection expression = ellipse(22138.776000, 28504.352600, 3286.296095, 3286.296095, 0.000000, X, Y)
[Mon May 14 23:33:41 2012] Writing source region out to fullrun_mos1_xmm0504260101_pi300-10000_pass1_cl_src30_src.reg
[Mon May 14 23:33:41 2012] Extracting stamp from image fullrun_mos1_xmm0504260101_pi300-10000_cl_sm2.00.img.gz, (66, 139) - (444, 517)
[Mon May 14 23:33:42 2012] XMMSAS bgd. selection expression = annulus(22138.776000, 28504.352600, 10954.320315, 21908.640630, X, Y) && !ellipse(25813.695800, 28052.363600, 3479.040100, 3479.040100, 0.000000, X, Y) && !ellipse(28407.114000, 29509.173400, 958.272028, 958.272028, 0.000000, X, Y) && !ellipse(25354.225586, 29823.826691, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26073.462000, 30533.494000, 1186.784034, 1186.784034, 0.000000, X, Y) && !ellipse(25903.436981, 11761.565475, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25149.044000, 24965.102000, 1081.336031, 1081.336031, 0.000000, X, Y) && !ellipse(24095.829315, 29020.863525, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28892.269836, 27907.978790, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24652.124329, 29531.269012, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26769.406647, 30861.828979, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24167.568000, 25001.714000, 1133.344033, 1133.344033, 0.000000, X, Y) && !ellipse(27530.442000, 32680.150000, 2814.864081, 2814.864081, 0.000000, X, Y) && !ellipse(27282.934000, 25651.996000, 1739.360050, 1739.360050, 162.612864, X, Y) && !ellipse(29065.648000, 25877.406000, 1205.144035, 1205.144035, 0.000000, X, Y) && !ellipse(26372.057617, 24844.361725, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29749.013275, 28627.212952, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21106.464300, 29201.966000, 276.654408, 276.654408, 0.000000, X, Y) && !ellipse(27184.003600, 31551.064000, 1344.104039, 1344.104039, 0.000000, X, Y) && !ellipse(29319.462000, 30012.530000, 2688.560077, 2688.560077, 0.000000, X, Y) && !ellipse(26071.481750, 30997.644348, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24567.274902, 31215.577118, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23747.514000, 25536.212000, 1214.824035, 1214.824035, 0.000000, X, Y) && !ellipse(24233.750122, 39321.230225, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26746.193726, 31751.415131, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13546.162003, 28729.179352, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27325.516000, 31834.136000, 688.883220, 688.883220, 0.000000, X, Y) && !ellipse(21619.350739, 37953.412231, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31744.833200, 28938.059600, 388.615211, 388.615211, 0.000000, X, Y) && !ellipse(33314.696000, 33021.032000, 1703.552049, 1703.552049, 0.000000, X, Y) && !ellipse(17739.878400, 17148.467000, 406.825612, 406.825612, 0.000000, X, Y) && !ellipse(23100.914000, 28483.100400, 1095.432032, 1095.432032, 0.000000, X, Y) && !ellipse(22736.133057, 27179.146698, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28175.906000, 24331.414000, 1189.232034, 1189.232034, 0.000000, X, Y) && !ellipse(25871.249200, 23630.294000, 1150.936033, 1150.936033, 0.000000, X, Y) && !ellipse(33811.231995, 29646.938019, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(28442.642000, 30397.420000, 1424.816041, 1424.816041, 0.000000, X, Y) && !ellipse(33728.450836, 31594.221466, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(28051.644000, 25763.208000, 1211.728035, 1211.728035, 0.000000, X, Y) && !ellipse(22917.296000, 24500.550000, 1214.312035, 1214.312035, 0.000000, X, Y) && !ellipse(23503.983459, 30131.268463, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34245.550000, 31415.692400, 1714.232049, 1714.232049, 0.000000, X, Y) && !ellipse(17796.128464, 33972.448029, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(26815.763458, 23905.747803, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21918.020000, 29515.823400, 1341.912039, 1341.912039, 0.000000, X, Y) && !ellipse(26558.869400, 32564.308000, 1029.472030, 1029.472030, 0.000000, X, Y) && !ellipse(38083.216614, 34444.036987, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18249.822525, 14789.541428, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40964.956207, 30732.021942, 870.000000, 870.000000, 0.000000, X, Y)
[Mon May 14 23:33:42 2012] Writing fullrun_mos1_xmm0504260101_pi300-10000_pass1_cl_src30.gif
[Tue May 15 00:37:05 2012] Mean detx,y = (1755.06, -1858.73) 
[Tue May 15 00:37:09 2012] Setting backscal keywords in source and bgd. spectrum
[Tue May 15 00:48:18 2012] Binned source spectrum to 10 counts/bin
[Tue May 15 00:48:18 2012] Setting source spectrum file to fullrun_mos1_xmm0504260101_pi300-10000_pass1_cl_src30_src_b10.pi.gz
[Tue May 15 00:48:18 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0504260101_pi300-10000_pass1_cl_src30_bgd.pi.gz
[Tue May 15 08:09:11 2012] Updating aperture counts using extracted products
[Tue May 15 08:09:11 2012] Error reading totcts from fullrun_mos1_xmm0504260101_pi300-10000_pass1_cl_src30_src_b10.pi.gz
[Tue May 15 08:09:13 2012] Calculating source flux in energy range 0.30-8.00
[Tue May 15 08:09:13 2012] Using photon index=1.80, rate=0.0107, arf fullrun_mos1_xmm0504260101_pi300-10000_pass1_cl_src30.arf
[Tue May 15 08:09:13 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 15 08:09:13 2012] Updating source flux to 9.7e-14
[Tue May 15 08:09:18 2012] Flag c found in src. 30 procflags, skipping spectral fitting