[Tue May  8 09:25:56 2012] Detection parameters:
  Position = (243.9, 336.6) = 9 18 22.13 -12 4 40.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 502.6 +/- 35.4
  Background counts = 472.4
  Rate = 0.006 +/- 0.0004

[Tue May  8 09:26:07 2012] Off-axis axis estimate = 4.83'
[Tue May  8 23:48:26 2012] Using EEF radius (= 8.84 ")to estimate initial spatial extent for simple fitting
[Tue May  8 23:48:26 2012] Initial guess for spatial extent in simple fitting = 8.84"
[Tue May  8 23:48:26 2012] source mask rpix=2.0, npix_max = 25, mask sum = 20, frac = 0.779
[Tue May  8 23:48:26 2012] Giving source the simple spatial ID 19 for pass 0, mean size = 8.84"
[Thu May 10 02:09:26 2012] fullrun_mos1_xmm0504260101_pi300-10000_cl_pass0_src19.ximg exists
[Thu May 10 02:09:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504260101_pi300-10000_cl_pass0_src19.csv
[Thu May 10 02:09:26 2012] fullrun_mos1_xmm0504260101_pi300-10000_cl_pass0_src19_1.ximg exists
[Thu May 10 02:09:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504260101_pi300-10000_cl_pass0_src19.csv
[Thu May 10 02:09:26 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0504260101_pi300-10000_cl_pass0_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0504260101_pi300-10000_cl_pass0_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 10 02:09:28 2012] fullrun_mos1_xmm0504260101_pi300-10000_cl_pass0_tfrozen_src19.ximg exists
[Thu May 10 02:09:28 2012] fullrun_mos1_xmm0504260101_pi300-10000_cl_pass0_tfrozen_src19_1.ximg exists
[Thu May 10 02:09:28 2012] Fit fullrun_mos1_xmm0504260101_pi300-10000_cl_pass0_tfrozen_src19 appears to have run properly
[Thu May 10 09:29:24 2012] Warning: source 19 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 28 at 10.268357 pixels away
[Thu May 10 09:29:25 2012] Spatial fit model total counts = 4885.380000, observed total counts = 4671.000000
[Thu May 10 09:29:25 2012] Offset between fit and detection position for source 28 = 0.708137 pixels
[Thu May 10 09:29:25 2012] Warning, changing simple spatial fit ID from 19 to 44
[Thu May 10 09:29:25 2012] 4941.717000 total counts/ 4798.580000 bgd. counts: snr = 2.066310
Spatial fit parameters:
  Offset between fit and detection position for source 28 = 0.708137 pixels
  Position = (243.2, 336.3) = 9 18 22.32 -12 4 39.0
  Extent = 3.4 (2.4-4.5)", rotation angle = 0
  Source counts = 143.1 +/- 70.3
  Background counts = 4798.6
  Rate = 0.001 +/- 0.0007
[Thu May 10 09:29:25 2012] Vigneting correction estimate = 1.000000
[Thu May 10 09:29:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 10 09:29:25 2012] Assessing source extent using major axis lower bound
[Thu May 10 09:29:25 2012] Source does appear to be extended
[Thu May 10 09:29:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 10 21:17:46 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu May 10 21:17:46 2012] Initial guess for spatial extent in simple fitting = 3.35"
[Thu May 10 21:17:46 2012] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.930
[Thu May 10 21:17:46 2012] Giving source the simple spatial ID 18 for pass 1, mean size = 3.35"
[Fri May 11 21:10:07 2012] fullrun_mos1_xmm0504260101_pi300-10000_cl_pass1_src18.ximg exists
[Fri May 11 21:10:07 2012] fullrun_mos1_xmm0504260101_pi300-10000_cl_pass1_src18_1.ximg exists
[Fri May 11 21:10:07 2012] Fit fullrun_mos1_xmm0504260101_pi300-10000_cl_pass1_src18 appears to have run properly
[Fri May 11 21:10:08 2012] fullrun_mos1_xmm0504260101_pi300-10000_cl_pass1_tfrozen_src18.ximg exists
[Fri May 11 21:10:08 2012] fullrun_mos1_xmm0504260101_pi300-10000_cl_pass1_tfrozen_src18_1.ximg exists
[Fri May 11 21:10:08 2012] Fit fullrun_mos1_xmm0504260101_pi300-10000_cl_pass1_tfrozen_src18 appears to have run properly
[Sat May 12 02:47:30 2012] Spatial fit model total counts = 3222.260000, observed total counts = 3050.000000
[Sat May 12 02:47:30 2012] Offset between fit and detection position for source 28 = 0.096949 pixels
[Sat May 12 02:47:30 2012] 3273.264000 total counts/ 3091.050000 bgd. counts: snr = 3.277395
Spatial fit parameters:
  Offset between fit and detection position for source 28 = 0.096949 pixels
  Position = (243.2, 336.2) = 9 18 22.34 -12 4 39.2
  Extent = 3.5 (2.8-4.1)", rotation angle = 0
  Source counts = 182.2 +/- 57.2
  Background counts = 3091.1
  Rate = 0.002 +/- 0.0005
[Sat May 12 02:47:30 2012] Vigneting correction estimate = 1.000000
[Sat May 12 02:47:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 12 02:47:30 2012] Assessing source extent using major axis lower bound
[Sat May 12 02:47:30 2012] Source does appear to be extended
[Sat May 12 02:47:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 12 02:47:30 2012] Source is confused with source 30
[Sat May 12 02:47:30 2012] Source is confused with source 27
[Mon May 14 23:33:41 2012] XMMSAS src. selection expression = ellipse(21106.464300, 29201.966000, 207.490806, 207.490806, 0.000000, X, Y)
[Mon May 14 23:33:41 2012] Writing source region out to fullrun_mos1_xmm0504260101_pi300-10000_pass1_cl_src28_src.reg
[Mon May 14 23:33:41 2012] Extracting stamp from image fullrun_mos1_xmm0504260101_pi300-10000_cl_sm2.00.img.gz, (231, 324) - (255, 348)
[Mon May 14 23:33:41 2012] XMMSAS bgd. selection expression = annulus(21106.464300, 29201.966000, 345.818010, 691.636020, X, Y) && !ellipse(22138.776000, 28504.352600, 2190.864063, 2190.864063, 0.000000, X, Y) && !ellipse(21918.020000, 29515.823400, 1341.912039, 1341.912039, 0.000000, X, Y)
[Mon May 14 23:33:41 2012] Writing fullrun_mos1_xmm0504260101_pi300-10000_pass1_cl_src28.gif
[Tue May 15 00:12:59 2012] Mean detx,y = (4088.08, -3297.50) 
[Tue May 15 00:13:00 2012] Setting backscal keywords in source and bgd. spectrum
[Tue May 15 00:13:09 2012] Binned source spectrum to 10 counts/bin
[Tue May 15 00:13:09 2012] Setting source spectrum file to fullrun_mos1_xmm0504260101_pi300-10000_pass1_cl_src28_src_b10.pi.gz
[Tue May 15 00:13:09 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0504260101_pi300-10000_pass1_cl_src28_bgd.pi.gz
[Tue May 15 08:09:10 2012] Updating aperture counts using extracted products
[Tue May 15 08:09:10 2012] Error reading totcts from fullrun_mos1_xmm0504260101_pi300-10000_pass1_cl_src28_src_b10.pi.gz
[Tue May 15 08:09:12 2012] Calculating source flux in energy range 0.30-8.00
[Tue May 15 08:09:12 2012] Using photon index=1.80, rate=0.00173, arf fullrun_mos1_xmm0504260101_pi300-10000_pass1_cl_src28.arf
[Tue May 15 08:09:12 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 15 08:09:12 2012] Updating source flux to 3.5e-14
[Tue May 15 08:09:18 2012] Flag c found in src. 28 procflags, skipping spectral fitting