[Tue May  8 09:25:54 2012] Detection parameters:
  Position = (303.0, 351.3) = 9 18 4.59 -12 3 41.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1429.0 +/- 69.9
  Background counts = 823.2
  Rate = 0.01 +/- 0.0007

[Tue May  8 09:26:07 2012] Off-axis axis estimate = 3.85'
[Tue May  8 23:48:26 2012] Using EEF radius (= 8.35 ")to estimate initial spatial extent for simple fitting
[Tue May  8 23:48:26 2012] Initial guess for spatial extent in simple fitting = 8.35"
[Tue May  8 23:48:26 2012] source mask rpix=1.9, npix_max = 23, mask sum = 17, frac = 0.726
[Tue May  8 23:48:26 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 8.35"
[Thu May 10 02:09:26 2012] fullrun_mos1_xmm0504260101_pi300-10000_cl_pass0_src5.ximg exists
[Thu May 10 02:09:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504260101_pi300-10000_cl_pass0_src5.csv
[Thu May 10 02:09:26 2012] fullrun_mos1_xmm0504260101_pi300-10000_cl_pass0_src5_1.ximg exists
[Thu May 10 02:09:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504260101_pi300-10000_cl_pass0_src5.csv
[Thu May 10 02:09:26 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0504260101_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0504260101_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 10 02:09:27 2012] fullrun_mos1_xmm0504260101_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Thu May 10 02:09:27 2012] fullrun_mos1_xmm0504260101_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Thu May 10 02:09:27 2012] Fit fullrun_mos1_xmm0504260101_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Thu May 10 09:29:24 2012] Source 20 is offset by 0.114190 and 6.999804 pixels which is larger than
2 X fitted extent = 3.029458 x 3.029458, not incorporating fit results
[Thu May 10 09:29:24 2012] Spatial fit model total counts = 11570.500000, observed total counts = 11359.000000
[Thu May 10 09:29:24 2012] Offset between fit and detection position for source 20 = 2.367048 pixels
[Thu May 10 09:29:24 2012] Warning, changing simple spatial fit ID from 5 to 12
[Thu May 10 09:29:24 2012] 10717.250000 total counts/ 10048.600000 bgd. counts: snr = 6.670311
Spatial fit parameters:
  Offset between fit and detection position for source 20 = 2.367048 pixels
  Position = (301.2, 352.8) = 9 18 5.14 -12 3 27.2
  Extent = 17.0 (17.0-34.1)", rotation angle = 0
  Source counts = 668.6 +/- 103.5
  Background counts = 10048.6
  Rate = 0.006 +/- 0.001
[Thu May 10 09:29:25 2012] Vigneting correction estimate = 1.000000
[Thu May 10 09:29:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 10 09:29:25 2012] Assessing source extent using major axis lower bound
[Thu May 10 09:29:25 2012] Source does appear to be extended
[Thu May 10 09:29:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 10 09:29:25 2012] Source is confused with source 18
[Thu May 10 09:29:25 2012] Source is confused with source 16
[Thu May 10 21:17:46 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu May 10 21:17:46 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu May 10 21:17:46 2012] Initial guess for spatial extent in simple fitting = 17.04"
[Thu May 10 21:17:46 2012] source mask rpix=3.9, npix_max = 78, mask sum = 73, frac = 0.935
[Thu May 10 21:17:46 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 17.04"
[Fri May 11 21:10:06 2012] fullrun_mos1_xmm0504260101_pi300-10000_cl_pass1_src5.ximg exists
[Fri May 11 21:10:06 2012] fullrun_mos1_xmm0504260101_pi300-10000_cl_pass1_src5_1.ximg exists
[Fri May 11 21:10:06 2012] Fit fullrun_mos1_xmm0504260101_pi300-10000_cl_pass1_src5 appears to have run properly
[Fri May 11 21:10:07 2012] fullrun_mos1_xmm0504260101_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Fri May 11 21:10:07 2012] fullrun_mos1_xmm0504260101_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Fri May 11 21:10:07 2012] Fit fullrun_mos1_xmm0504260101_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Sat May 12 02:47:30 2012] Warning, spatial fit 5 centroid is now closest to src. 26
[Sat May 12 02:47:30 2012] Spatial fit model total counts = 11621.200000, observed total counts = 11359.000000
[Sat May 12 02:47:30 2012] Offset between fit and detection position for source 20 = 1.553470 pixels
[Sat May 12 02:47:30 2012] Warning, changing simple spatial fit ID from 5 to 11
[Sat May 12 02:47:30 2012] 10178.595000 total counts/ 9547.330000 bgd. counts: snr = 6.460569
Spatial fit parameters:
  Offset between fit and detection position for source 20 = 1.553470 pixels
  Position = (300.3, 351.5) = 9 18 5.41 -12 3 32.7
  Extent = 14.8 (12.6-15.9)", rotation angle = 0
  Source counts = 631.3 +/- 100.9
  Background counts = 9547.3
  Rate = 0.006 +/- 0.001
[Sat May 12 02:47:30 2012] Vigneting correction estimate = 1.000000
[Sat May 12 02:47:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 12 02:47:30 2012] Assessing source extent using major axis lower bound
[Sat May 12 02:47:30 2012] Source does appear to be extended
[Sat May 12 02:47:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 14 23:33:40 2012] XMMSAS src. selection expression = ellipse(26073.462000, 30533.494000, 890.088026, 890.088026, 0.000000, X, Y)
[Mon May 14 23:33:40 2012] Writing source region out to fullrun_mos1_xmm0504260101_pi300-10000_pass1_cl_src20_src.reg
[Mon May 14 23:33:40 2012] Extracting stamp from image fullrun_mos1_xmm0504260101_pi300-10000_cl_sm2.00.img.gz, (249, 300) - (351, 403)
[Mon May 14 23:33:40 2012] XMMSAS bgd. selection expression = annulus(26073.462000, 30533.494000, 1483.480043, 2966.960085, X, Y) && !ellipse(25813.695800, 28052.363600, 3479.040100, 3479.040100, 0.000000, X, Y) && !ellipse(28407.114000, 29509.173400, 958.272028, 958.272028, 0.000000, X, Y) && !ellipse(25354.225586, 29823.826691, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24095.829315, 29020.863525, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28892.269836, 27907.978790, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24652.124329, 29531.269012, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26769.406647, 30861.828979, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27530.442000, 32680.150000, 2814.864081, 2814.864081, 0.000000, X, Y) && !ellipse(29749.013275, 28627.212952, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27184.003600, 31551.064000, 1344.104039, 1344.104039, 0.000000, X, Y) && !ellipse(29319.462000, 30012.530000, 2688.560077, 2688.560077, 0.000000, X, Y) && !ellipse(26071.481750, 30997.644348, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24567.274902, 31215.577118, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26746.193726, 31751.415131, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27325.516000, 31834.136000, 688.883220, 688.883220, 0.000000, X, Y) && !ellipse(23100.914000, 28483.100400, 1095.432032, 1095.432032, 0.000000, X, Y) && !ellipse(22736.133057, 27179.146698, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28442.642000, 30397.420000, 1424.816041, 1424.816041, 0.000000, X, Y) && !ellipse(23503.983459, 30131.268463, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22138.776000, 28504.352600, 2190.864063, 2190.864063, 0.000000, X, Y) && !ellipse(21918.020000, 29515.823400, 1341.912039, 1341.912039, 0.000000, X, Y) && !ellipse(26558.869400, 32564.308000, 1029.472030, 1029.472030, 0.000000, X, Y)
[Mon May 14 23:33:40 2012] Writing fullrun_mos1_xmm0504260101_pi300-10000_pass1_cl_src20.gif
[Mon May 14 23:49:27 2012] Mean detx,y = (2103.22, 1443.67) 
[Mon May 14 23:49:28 2012] Setting backscal keywords in source and bgd. spectrum
[Mon May 14 23:49:43 2012] Binned source spectrum to 10 counts/bin
[Mon May 14 23:49:44 2012] Setting source spectrum file to fullrun_mos1_xmm0504260101_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Mon May 14 23:49:44 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0504260101_pi300-10000_pass1_cl_src20_bgd.pi.gz
[Tue May 15 08:09:09 2012] Updating aperture counts using extracted products
[Tue May 15 08:09:09 2012] Error reading totcts from fullrun_mos1_xmm0504260101_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Tue May 15 08:09:11 2012] Calculating source flux in energy range 0.30-8.00
[Tue May 15 08:09:11 2012] Using photon index=1.80, rate=0.00598, arf fullrun_mos1_xmm0504260101_pi300-10000_pass1_cl_src20.arf
[Tue May 15 08:09:11 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 15 08:09:11 2012] Updating source flux to 5.7e-14
[Tue May 15 08:09:18 2012] Flag b found in src. 20 procflags, skipping spectral fitting
[Tue May 15 08:09:18 2012] Flag c found in src. 20 procflags, skipping spectral fitting