[Tue May  8 09:25:54 2012] Detection parameters:
  Position = (471.4, 353.8) = 9 17 14.65 -12 3 22.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 168.4 +/- 23.0
  Background counts = 188.5
  Rate = 0.001 +/- 0.0002

[Tue May  8 09:26:07 2012] Off-axis axis estimate = 13.17'
[Tue May  8 23:48:26 2012] Using EEF radius (= 13.01 ")to estimate initial spatial extent for simple fitting
[Tue May  8 23:48:26 2012] Initial guess for spatial extent in simple fitting = 13.01"
[Tue May  8 23:48:26 2012] source mask rpix=3.0, npix_max = 48, mask sum = 47, frac = 0.964
[Tue May  8 23:48:26 2012] Giving source the simple spatial ID 59 for pass 0, mean size = 13.01"
[Thu May 10 02:09:27 2012] fullrun_mos1_xmm0504260101_pi300-10000_cl_pass0_src59.ximg exists
[Thu May 10 02:09:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504260101_pi300-10000_cl_pass0_src59.csv
[Thu May 10 02:09:27 2012] fullrun_mos1_xmm0504260101_pi300-10000_cl_pass0_src59_1.ximg exists
[Thu May 10 02:09:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504260101_pi300-10000_cl_pass0_src59.csv
[Thu May 10 02:09:27 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0504260101_pi300-10000_cl_pass0_src59_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0504260101_pi300-10000_cl_pass0_src59.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 10 02:09:28 2012] fullrun_mos1_xmm0504260101_pi300-10000_cl_pass0_tfrozen_src59.ximg exists
[Thu May 10 02:09:28 2012] fullrun_mos1_xmm0504260101_pi300-10000_cl_pass0_tfrozen_src59_1.ximg exists
[Thu May 10 02:09:28 2012] Fit fullrun_mos1_xmm0504260101_pi300-10000_cl_pass0_tfrozen_src59 appears to have run properly
[Thu May 10 09:29:25 2012] Warning: source 59 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 19 at 12.264966 pixels away
[Thu May 10 09:29:25 2012] Vigneting correction estimate = 1.000000
[Thu May 10 09:29:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 10 09:29:25 2012] Assessing source extent using major
[Thu May 10 09:29:25 2012] Source does appear to be extended
[Thu May 10 09:29:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 10 21:17:46 2012] Using EEF radius (= 13.01 ")to estimate initial spatial extent for simple fitting
[Thu May 10 21:17:46 2012] Initial guess for spatial extent in simple fitting = 13.01"
[Thu May 10 21:17:46 2012] source mask rpix=3.0, npix_max = 48, mask sum = 47, frac = 0.964
[Thu May 10 21:17:46 2012] Giving source the simple spatial ID 52 for pass 1, mean size = 13.01"
[Fri May 11 21:10:07 2012] fullrun_mos1_xmm0504260101_pi300-10000_cl_pass1_src52.ximg exists
[Fri May 11 21:10:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504260101_pi300-10000_cl_pass1_src52.csv
[Fri May 11 21:10:07 2012] fullrun_mos1_xmm0504260101_pi300-10000_cl_pass1_src52_1.ximg exists
[Fri May 11 21:10:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504260101_pi300-10000_cl_pass1_src52.csv
[Fri May 11 21:10:07 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0504260101_pi300-10000_cl_pass1_src52_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0504260101_pi300-10000_cl_pass1_src52.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 11 21:10:09 2012] fullrun_mos1_xmm0504260101_pi300-10000_cl_pass1_tfrozen_src52.ximg exists
[Fri May 11 21:10:09 2012] fullrun_mos1_xmm0504260101_pi300-10000_cl_pass1_tfrozen_src52_1.ximg exists
[Fri May 11 21:10:09 2012] Fit fullrun_mos1_xmm0504260101_pi300-10000_cl_pass1_tfrozen_src52 appears to have run properly
[Sat May 12 02:47:30 2012] Warning: source 52 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 19 at 16.484159 pixels away
[Sat May 12 02:47:30 2012] Vigneting correction estimate = 1.000000
[Sat May 12 02:47:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 12 02:47:30 2012] Assessing source extent using major
[Sat May 12 02:47:30 2012] Source does appear to be extended
[Sat May 12 02:47:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 14 23:33:42 2012] XMMSAS src. selection expression = ellipse(40964.956207, 30732.021942, 652.500000, 652.500000, 0.000000, X, Y)
[Mon May 14 23:33:42 2012] Writing source region out to fullrun_mos1_xmm0504260101_pi300-10000_pass1_cl_src19_src.reg
[Mon May 14 23:33:42 2012] Extracting stamp from image fullrun_mos1_xmm0504260101_pi300-10000_cl_sm2.00.img.gz, (434, 316) - (509, 391)
[Mon May 14 23:33:42 2012] XMMSAS bgd. selection expression = annulus(40964.956207, 30732.021942, 1087.500000, 2175.000000, X, Y)
[Mon May 14 23:33:42 2012] Writing fullrun_mos1_xmm0504260101_pi300-10000_pass1_cl_src19.gif
[Tue May 15 00:53:33 2012] Mean detx,y = (-6437.09, 13565.11) 
[Tue May 15 00:53:34 2012] Setting backscal keywords in source and bgd. spectrum
[Tue May 15 00:53:53 2012] Binned source spectrum to 10 counts/bin
[Tue May 15 00:53:53 2012] Setting source spectrum file to fullrun_mos1_xmm0504260101_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Tue May 15 00:53:53 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0504260101_pi300-10000_pass1_cl_src19_bgd.pi.gz
[Tue May 15 04:38:21 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue May 15 04:38:21 2012] rmf not generated due to insufficient counts
[Tue May 15 08:09:11 2012] Updating aperture counts using extracted products
[Tue May 15 08:09:11 2012] Error reading totcts from fullrun_mos1_xmm0504260101_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Tue May 15 08:09:14 2012] Calculating source flux in energy range 0.30-8.00
[Tue May 15 08:09:14 2012] Using photon index=1.80, rate=0.00138, arf fullrun_mos1_xmm0504260101_pi300-10000_pass1_cl_src19.arf
[Tue May 15 08:09:14 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 15 08:09:14 2012] Updating source flux to 3.2e-14
[Tue May 15 08:09:18 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting