[Tue May  8 09:25:52 2012] Detection parameters:
  Position = (314.4, 366.7) = 9 18 1.21 -12 2 24.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 451.8 +/- 43.4
  Background counts = 643.8
  Rate = 0.004 +/- 0.0004

[Tue May  8 09:26:07 2012] Off-axis axis estimate = 5.08'
[Tue May  8 23:48:26 2012] Using EEF radius (= 8.97 ")to estimate initial spatial extent for simple fitting
[Tue May  8 23:48:26 2012] Initial guess for spatial extent in simple fitting = 8.97"
[Tue May  8 23:48:26 2012] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.952
[Tue May  8 23:48:26 2012] Giving source the simple spatial ID 28 for pass 0, mean size = 8.97"
[Thu May 10 02:09:26 2012] fullrun_mos1_xmm0504260101_pi300-10000_cl_pass0_src28.ximg exists
[Thu May 10 02:09:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504260101_pi300-10000_cl_pass0_src28.csv
[Thu May 10 02:09:26 2012] fullrun_mos1_xmm0504260101_pi300-10000_cl_pass0_src28_1.ximg exists
[Thu May 10 02:09:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504260101_pi300-10000_cl_pass0_src28.csv
[Thu May 10 02:09:26 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0504260101_pi300-10000_cl_pass0_src28_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0504260101_pi300-10000_cl_pass0_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 10 02:09:28 2012] fullrun_mos1_xmm0504260101_pi300-10000_cl_pass0_tfrozen_src28.ximg exists
[Thu May 10 02:09:28 2012] fullrun_mos1_xmm0504260101_pi300-10000_cl_pass0_tfrozen_src28_1.ximg exists
[Thu May 10 02:09:28 2012] Fit fullrun_mos1_xmm0504260101_pi300-10000_cl_pass0_tfrozen_src28 appears to have run properly
[Thu May 10 09:29:24 2012] Spatial fit model total counts = 4568.010000, observed total counts = 4484.000000
[Thu May 10 09:29:24 2012] Offset between fit and detection position for source 12 = 0.325308 pixels
[Thu May 10 09:29:24 2012] Warning, changing simple spatial fit ID from 28 to 14
[Thu May 10 09:29:24 2012] 4490.364000 total counts/ 4284.620000 bgd. counts: snr = 3.143193
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 0.325308 pixels
  Position = (314.6, 366.5) = 9 18 1.14 -12 2 27.7
  Extent = 8.6 (4.0-11.6)", rotation angle = 0
  Source counts = 205.7 +/- 67.0
  Background counts = 4284.6
  Rate = 0.002 +/- 0.0006
[Thu May 10 09:29:25 2012] Vigneting correction estimate = 1.000000
[Thu May 10 09:29:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 10 09:29:25 2012] Assessing source extent using major axis lower bound
[Thu May 10 09:29:25 2012] Source does appear to be extended
[Thu May 10 09:29:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 10 09:29:25 2012] Source is confused with source 14
[Thu May 10 21:17:46 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu May 10 21:17:46 2012] Initial guess for spatial extent in simple fitting = 8.61"
[Thu May 10 21:17:46 2012] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.017
[Thu May 10 21:17:46 2012] Giving source the simple spatial ID 27 for pass 1, mean size = 8.61"
[Fri May 11 21:10:07 2012] fullrun_mos1_xmm0504260101_pi300-10000_cl_pass1_src27.ximg exists
[Fri May 11 21:10:07 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0504260101_pi300-10000_cl_pass1_src27.csv
[Fri May 11 21:10:07 2012] fullrun_mos1_xmm0504260101_pi300-10000_cl_pass1_src27_1.ximg exists
[Fri May 11 21:10:07 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0504260101_pi300-10000_cl_pass1_src27.csv
[Fri May 11 21:10:07 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0504260101_pi300-10000_cl_pass1_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0504260101_pi300-10000_cl_pass1_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 11 21:10:08 2012] fullrun_mos1_xmm0504260101_pi300-10000_cl_pass1_tfrozen_src27.ximg exists
[Fri May 11 21:10:08 2012] fullrun_mos1_xmm0504260101_pi300-10000_cl_pass1_tfrozen_src27_1.ximg exists
[Fri May 11 21:10:08 2012] Fit fullrun_mos1_xmm0504260101_pi300-10000_cl_pass1_tfrozen_src27 appears to have run properly
[Sat May 12 02:47:30 2012] Warning, spatial fit 27 centroid is now closest to src. 14
[Sat May 12 02:47:30 2012] Vigneting correction estimate = 1.000000
[Sat May 12 02:47:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 12 02:47:30 2012] Assessing source extent using major axis lower bound
[Sat May 12 02:47:30 2012] Source does appear to be extended
[Sat May 12 02:47:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 14 23:33:41 2012] XMMSAS src. selection expression = ellipse(27325.516000, 31834.136000, 516.662415, 516.662415, 0.000000, X, Y)
[Mon May 14 23:33:41 2012] Writing source region out to fullrun_mos1_xmm0504260101_pi300-10000_pass1_cl_src12_src.reg
[Mon May 14 23:33:41 2012] Extracting stamp from image fullrun_mos1_xmm0504260101_pi300-10000_cl_sm2.00.img.gz, (285, 337) - (344, 396)
[Mon May 14 23:33:41 2012] XMMSAS bgd. selection expression = annulus(27325.516000, 31834.136000, 861.104025, 1722.208050, X, Y) && !ellipse(25813.695800, 28052.363600, 3479.040100, 3479.040100, 0.000000, X, Y) && !ellipse(28407.114000, 29509.173400, 958.272028, 958.272028, 0.000000, X, Y) && !ellipse(25354.225586, 29823.826691, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26073.462000, 30533.494000, 1186.784034, 1186.784034, 0.000000, X, Y) && !ellipse(26769.406647, 30861.828979, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27530.442000, 32680.150000, 2814.864081, 2814.864081, 0.000000, X, Y) && !ellipse(27184.003600, 31551.064000, 1344.104039, 1344.104039, 0.000000, X, Y) && !ellipse(29319.462000, 30012.530000, 2688.560077, 2688.560077, 0.000000, X, Y) && !ellipse(26071.481750, 30997.644348, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26746.193726, 31751.415131, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28442.642000, 30397.420000, 1424.816041, 1424.816041, 0.000000, X, Y) && !ellipse(26558.869400, 32564.308000, 1029.472030, 1029.472030, 0.000000, X, Y)
[Mon May 14 23:33:41 2012] Writing fullrun_mos1_xmm0504260101_pi300-10000_pass1_cl_src12.gif
[Tue May 15 00:28:04 2012] Mean detx,y = (2475.81, 3238.87) 
[Tue May 15 00:28:06 2012] Setting backscal keywords in source and bgd. spectrum
[Tue May 15 00:28:17 2012] Binned source spectrum to 10 counts/bin
[Tue May 15 00:28:17 2012] Setting source spectrum file to fullrun_mos1_xmm0504260101_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Tue May 15 00:28:17 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0504260101_pi300-10000_pass1_cl_src12_bgd.pi.gz
[Tue May 15 08:09:10 2012] Updating aperture counts using extracted products
[Tue May 15 08:09:10 2012] Error reading totcts from fullrun_mos1_xmm0504260101_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Tue May 15 08:09:12 2012] Calculating source flux in energy range 0.30-8.00
[Tue May 15 08:09:12 2012] Using photon index=1.80, rate=0.00195, arf fullrun_mos1_xmm0504260101_pi300-10000_pass1_cl_src12.arf
[Tue May 15 08:09:12 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 15 08:09:12 2012] Updating source flux to 2.2e-14
[Tue May 15 08:09:18 2012] Flag c found in src. 12 procflags, skipping spectral fitting