[Tue May  8 09:25:52 2012] Detection parameters:
  Position = (319.5, 374.2) = 9 17 59.69 -12 1 40.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 670.2 +/- 97.0
  Background counts = 542.5
  Rate = 0.008 +/- 0.001

[Tue May  8 09:26:07 2012] Off-axis axis estimate = 5.70'
[Tue May  8 23:48:26 2012] Using EEF radius (= 9.28 ")to estimate initial spatial extent for simple fitting
[Tue May  8 23:48:26 2012] Initial guess for spatial extent in simple fitting = 9.28"
[Tue May  8 23:48:26 2012] source mask rpix=2.1, npix_max = 27, mask sum = 19, frac = 0.685
[Tue May  8 23:48:26 2012] Giving source the simple spatial ID 14 for pass 0, mean size = 9.28"
[Thu May 10 02:09:26 2012] fullrun_mos1_xmm0504260101_pi300-10000_cl_pass0_src14.ximg exists
[Thu May 10 02:09:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504260101_pi300-10000_cl_pass0_src14.csv
[Thu May 10 02:09:26 2012] fullrun_mos1_xmm0504260101_pi300-10000_cl_pass0_src14_1.ximg exists
[Thu May 10 02:09:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504260101_pi300-10000_cl_pass0_src14.csv
[Thu May 10 02:09:26 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0504260101_pi300-10000_cl_pass0_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0504260101_pi300-10000_cl_pass0_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 10 02:09:27 2012] fullrun_mos1_xmm0504260101_pi300-10000_cl_pass0_tfrozen_src14.ximg exists
[Thu May 10 02:09:27 2012] fullrun_mos1_xmm0504260101_pi300-10000_cl_pass0_tfrozen_src14_1.ximg exists
[Thu May 10 02:09:27 2012] Fit fullrun_mos1_xmm0504260101_pi300-10000_cl_pass0_tfrozen_src14 appears to have run properly
[Thu May 10 09:29:24 2012] Warning, spatial fit 14 centroid is now closest to src. 12
[Thu May 10 09:29:25 2012] Vigneting correction estimate = 1.000000
[Thu May 10 09:29:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 10 09:29:25 2012] Assessing source extent using major
[Thu May 10 09:29:25 2012] Source does appear to be extended
[Thu May 10 09:29:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 10 21:17:46 2012] Using EEF radius (= 9.28 ")to estimate initial spatial extent for simple fitting
[Thu May 10 21:17:46 2012] Initial guess for spatial extent in simple fitting = 9.28"
[Thu May 10 21:17:46 2012] source mask rpix=2.1, npix_max = 27, mask sum = 19, frac = 0.685
[Thu May 10 21:17:46 2012] Giving source the simple spatial ID 13 for pass 1, mean size = 9.28"
[Fri May 11 21:10:06 2012] fullrun_mos1_xmm0504260101_pi300-10000_cl_pass1_src13.ximg exists
[Fri May 11 21:10:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504260101_pi300-10000_cl_pass1_src13.csv
[Fri May 11 21:10:07 2012] fullrun_mos1_xmm0504260101_pi300-10000_cl_pass1_src13_1.ximg exists
[Fri May 11 21:10:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504260101_pi300-10000_cl_pass1_src13.csv
[Fri May 11 21:10:07 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0504260101_pi300-10000_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0504260101_pi300-10000_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 11 21:10:08 2012] fullrun_mos1_xmm0504260101_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Fri May 11 21:10:08 2012] fullrun_mos1_xmm0504260101_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Fri May 11 21:10:08 2012] Fit fullrun_mos1_xmm0504260101_pi300-10000_cl_pass1_tfrozen_src13 appears to have run properly
[Sat May 12 02:47:30 2012] Source 10 is offset by 0.445713 and -9.312053 pixels which is larger than
2 X fitted extent = 8.532920 x 8.532920, not incorporating fit results
[Sat May 12 02:47:30 2012] Spatial fit model total counts = 19009.000000, observed total counts = 18521.000000
[Sat May 12 02:47:30 2012] Offset between fit and detection position for source 10 = 3.226772 pixels
[Sat May 12 02:47:30 2012] Warning, changing simple spatial fit ID from 13 to 19
[Sat May 12 02:47:30 2012] 18082.260000 total counts/ 16300.100000 bgd. counts: snr = 13.958912
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 3.226772 pixels
  Position = (317.0, 376.2) = 9 18 0.45 -12 1 45.4
  Extent = 35.2 (35.1-70.4)", rotation angle = 0
  Source counts = 1782.2 +/- 134.5
  Background counts = 16300.1
  Rate = 0.02 +/- 0.001
[Sat May 12 02:47:30 2012] Vigneting correction estimate = 1.000000
[Sat May 12 02:47:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 12 02:47:30 2012] Assessing source extent using major axis lower bound
[Sat May 12 02:47:30 2012] Source does appear to be extended
[Sat May 12 02:47:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 12 02:47:30 2012] Source is confused with source 18
[Sat May 12 02:47:30 2012] Source is confused with source 14
[Sat May 12 02:47:30 2012] Source is confused with source 13
[Sat May 12 02:47:30 2012] Source is confused with source 12
[Sat May 12 02:47:30 2012] Source is confused with source 11
[Mon May 14 23:33:40 2012] Counts = 1782.160000, rescaling region sizes by 2.000000
[Mon May 14 23:33:40 2012] XMMSAS src. selection expression = ellipse(27530.442000, 32680.150000, 4222.296121, 4222.296121, 0.000000, X, Y)
[Mon May 14 23:33:40 2012] Writing source region out to fullrun_mos1_xmm0504260101_pi300-10000_pass1_cl_src10_src.reg
[Mon May 14 23:33:40 2012] Extracting stamp from image fullrun_mos1_xmm0504260101_pi300-10000_cl_sm2.00.img.gz, (74, 134) - (560, 595)
[Mon May 14 23:33:40 2012] XMMSAS bgd. selection expression = annulus(27530.442000, 32680.150000, 14074.320405, 28148.640810, X, Y) && !ellipse(25813.695800, 28052.363600, 3479.040100, 3479.040100, 0.000000, X, Y) && !ellipse(28407.114000, 29509.173400, 958.272028, 958.272028, 0.000000, X, Y) && !ellipse(25354.225586, 29823.826691, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26073.462000, 30533.494000, 1186.784034, 1186.784034, 0.000000, X, Y) && !ellipse(25903.436981, 11761.565475, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25149.044000, 24965.102000, 1081.336031, 1081.336031, 0.000000, X, Y) && !ellipse(24095.829315, 29020.863525, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28892.269836, 27907.978790, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24652.124329, 29531.269012, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26769.406647, 30861.828979, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24167.568000, 25001.714000, 1133.344033, 1133.344033, 0.000000, X, Y) && !ellipse(27282.934000, 25651.996000, 1739.360050, 1739.360050, 162.612864, X, Y) && !ellipse(29065.648000, 25877.406000, 1205.144035, 1205.144035, 0.000000, X, Y) && !ellipse(26372.057617, 24844.361725, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29749.013275, 28627.212952, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21106.464300, 29201.966000, 276.654408, 276.654408, 0.000000, X, Y) && !ellipse(27184.003600, 31551.064000, 1344.104039, 1344.104039, 0.000000, X, Y) && !ellipse(29319.462000, 30012.530000, 2688.560077, 2688.560077, 0.000000, X, Y) && !ellipse(26071.481750, 30997.644348, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24567.274902, 31215.577118, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23747.514000, 25536.212000, 1214.824035, 1214.824035, 0.000000, X, Y) && !ellipse(24233.750122, 39321.230225, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26746.193726, 31751.415131, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13546.162003, 28729.179352, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27325.516000, 31834.136000, 688.883220, 688.883220, 0.000000, X, Y) && !ellipse(21619.350739, 37953.412231, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31744.833200, 28938.059600, 388.615211, 388.615211, 0.000000, X, Y) && !ellipse(33314.696000, 33021.032000, 1703.552049, 1703.552049, 0.000000, X, Y) && !ellipse(17739.878400, 17148.467000, 406.825612, 406.825612, 0.000000, X, Y) && !ellipse(23100.914000, 28483.100400, 1095.432032, 1095.432032, 0.000000, X, Y) && !ellipse(22736.133057, 27179.146698, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28175.906000, 24331.414000, 1189.232034, 1189.232034, 0.000000, X, Y) && !ellipse(25871.249200, 23630.294000, 1150.936033, 1150.936033, 0.000000, X, Y) && !ellipse(33811.231995, 29646.938019, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(28442.642000, 30397.420000, 1424.816041, 1424.816041, 0.000000, X, Y) && !ellipse(33728.450836, 31594.221466, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(28051.644000, 25763.208000, 1211.728035, 1211.728035, 0.000000, X, Y) && !ellipse(22917.296000, 24500.550000, 1214.312035, 1214.312035, 0.000000, X, Y) && !ellipse(23503.983459, 30131.268463, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22138.776000, 28504.352600, 2190.864063, 2190.864063, 0.000000, X, Y) && !ellipse(34245.550000, 31415.692400, 1714.232049, 1714.232049, 0.000000, X, Y) && !ellipse(17796.128464, 33972.448029, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(26815.763458, 23905.747803, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21918.020000, 29515.823400, 1341.912039, 1341.912039, 0.000000, X, Y) && !ellipse(26558.869400, 32564.308000, 1029.472030, 1029.472030, 0.000000, X, Y) && !ellipse(38083.216614, 34444.036987, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18249.822525, 14789.541428, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40964.956207, 30732.021942, 870.000000, 870.000000, 0.000000, X, Y)
[Mon May 14 23:33:40 2012] Writing fullrun_mos1_xmm0504260101_pi300-10000_pass1_cl_src10.gif
[Tue May 15 00:00:29 2012] Mean detx,y = (1776.33, 2356.69) 
[Tue May 15 00:00:33 2012] Setting backscal keywords in source and bgd. spectrum
[Tue May 15 00:10:56 2012] Binned source spectrum to 10 counts/bin
[Tue May 15 00:10:57 2012] Setting source spectrum file to fullrun_mos1_xmm0504260101_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Tue May 15 00:10:57 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0504260101_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Tue May 15 08:09:10 2012] Updating aperture counts using extracted products
[Tue May 15 08:09:10 2012] Error reading totcts from fullrun_mos1_xmm0504260101_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Tue May 15 08:09:12 2012] Calculating source flux in energy range 0.30-8.00
[Tue May 15 08:09:12 2012] Using photon index=1.80, rate=0.0169, arf fullrun_mos1_xmm0504260101_pi300-10000_pass1_cl_src10.arf
[Tue May 15 08:09:12 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 15 08:09:12 2012] Updating source flux to 1.6e-13
[Tue May 15 08:09:18 2012] Flag b found in src. 10 procflags, skipping spectral fitting
[Tue May 15 08:09:18 2012] Flag c found in src. 10 procflags, skipping spectral fitting