[Wed Jun 20 00:58:08 2012] Detection parameters:
  Position = (416.0, 262.6) = 12 42 6.26 14 13 50.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 89.1 +/- 15.0
  Background counts = 76.1
  Rate = 0.002 +/- 0.0003

[Wed Jun 20 00:58:08 2012] Off-axis axis estimate = 8.91'
[Wed Jun 20 02:07:30 2012] Using EEF radius (= 10.88 ")to estimate initial spatial extent for simple fitting
[Wed Jun 20 02:07:30 2012] Initial guess for spatial extent in simple fitting = 10.88"
[Wed Jun 20 02:07:30 2012] source mask rpix=2.5, npix_max = 36, mask sum = 35, frac = 0.971
[Wed Jun 20 02:07:30 2012] Giving source the simple spatial ID 7 for pass 0, mean size = 10.88"
[Wed Jun 20 02:36:25 2012] fullrun_mos1_xmm0504240101_pi300-10000_cl_pass0_src7.ximg exists
[Wed Jun 20 02:36:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504240101_pi300-10000_cl_pass0_src7.csv
[Wed Jun 20 02:36:25 2012] fullrun_mos1_xmm0504240101_pi300-10000_cl_pass0_src7_1.ximg exists
[Wed Jun 20 02:36:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504240101_pi300-10000_cl_pass0_src7.csv
[Wed Jun 20 02:36:25 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0504240101_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0504240101_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 20 02:36:25 2012] fullrun_mos1_xmm0504240101_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Wed Jun 20 02:36:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504240101_pi300-10000_cl_pass0_tfrozen_src7.csv
[Wed Jun 20 02:36:25 2012] fullrun_mos1_xmm0504240101_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Wed Jun 20 02:36:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504240101_pi300-10000_cl_pass0_tfrozen_src7.csv
[Wed Jun 20 02:36:25 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0504240101_pi300-10000_cl_pass0_tfrozen_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0504240101_pi300-10000_cl_pass0_tfrozen_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 20 03:16:27 2012] Warning: source 7 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 22 at 15.102950 pixels away
[Wed Jun 20 03:16:27 2012] Vigneting correction estimate = 1.000000
[Wed Jun 20 03:16:27 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 20 03:16:27 2012] Assessing source extent using major
[Wed Jun 20 03:16:27 2012] Source does appear to be extended
[Wed Jun 20 03:16:27 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 20 04:19:43 2012] Using EEF radius (= 10.88 ")to estimate initial spatial extent for simple fitting
[Wed Jun 20 04:19:43 2012] Initial guess for spatial extent in simple fitting = 10.88"
[Wed Jun 20 04:19:43 2012] source mask rpix=2.5, npix_max = 36, mask sum = 35, frac = 0.971
[Wed Jun 20 04:19:43 2012] Giving source the simple spatial ID 6 for pass 1, mean size = 10.88"
[Wed Jun 20 04:47:44 2012] fullrun_mos1_xmm0504240101_pi300-10000_cl_pass1_src6.ximg exists
[Wed Jun 20 04:47:44 2012] fullrun_mos1_xmm0504240101_pi300-10000_cl_pass1_src6_1.ximg exists
[Wed Jun 20 04:47:44 2012] Fit fullrun_mos1_xmm0504240101_pi300-10000_cl_pass1_src6 appears to have run properly
[Wed Jun 20 04:47:44 2012] fullrun_mos1_xmm0504240101_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Wed Jun 20 04:47:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504240101_pi300-10000_cl_pass1_tfrozen_src6.csv
[Wed Jun 20 04:47:44 2012] fullrun_mos1_xmm0504240101_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Wed Jun 20 04:47:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504240101_pi300-10000_cl_pass1_tfrozen_src6.csv
[Wed Jun 20 04:47:44 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0504240101_pi300-10000_cl_pass1_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0504240101_pi300-10000_cl_pass1_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 20 05:24:04 2012] Source 22 is offset by -0.983654 and 8.579362 pixels which is larger than
2 X fitted extent = 1.251113 x 1.251113, not incorporating fit results
[Wed Jun 20 05:24:04 2012] Vigneting correction estimate = 1.000000
[Wed Jun 20 05:24:04 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 20 05:24:04 2012] Assessing source extent using major
[Wed Jun 20 05:24:04 2012] Source does appear to be extended
[Wed Jun 20 05:24:04 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 20 07:00:41 2012] XMMSAS src. selection expression = ellipse(36144.827515, 22795.130463, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Jun 20 07:00:41 2012] Writing source region out to fullrun_mos1_xmm0504240101_pi300-10000_pass1_cl_src22_src.reg
[Wed Jun 20 07:00:41 2012] Extracting stamp from image fullrun_mos1_xmm0504240101_pi300-10000_cl_sm2.00.img.gz, (379, 225) - (454, 300)
[Wed Jun 20 07:00:41 2012] XMMSAS bgd. selection expression = annulus(36144.827515, 22795.130463, 1087.500000, 2175.000000, X, Y) && !ellipse(37079.541199, 25427.783173, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35627.564000, 26203.902000, 1702.872049, 1702.872049, 0.000000, X, Y)
[Wed Jun 20 07:00:41 2012] Writing fullrun_mos1_xmm0504240101_pi300-10000_pass1_cl_src22.gif
[Wed Jun 20 07:02:19 2012] Mean detx,y = (-8110.71, 7084.11) 
[Wed Jun 20 07:02:20 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jun 20 07:02:37 2012] Binned source spectrum to 10 counts/bin
[Wed Jun 20 07:02:37 2012] Setting source spectrum file to fullrun_mos1_xmm0504240101_pi300-10000_pass1_cl_src22_src_b10.pi.gz
[Wed Jun 20 07:02:37 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0504240101_pi300-10000_pass1_cl_src22_bgd.pi.gz
[Wed Jun 20 07:18:59 2012] Not generating rmf since there are only 89 counts
[Wed Jun 20 07:18:59 2012] rmf not generated due to insufficient counts
[Wed Jun 20 07:57:20 2012] Updating aperture counts using extracted products
[Wed Jun 20 07:57:20 2012] Error reading totcts from fullrun_mos1_xmm0504240101_pi300-10000_pass1_cl_src22_src_b10.pi.gz
[Wed Jun 20 07:57:21 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jun 20 07:57:21 2012] Using photon index=1.80, rate=0.00182, arf fullrun_mos1_xmm0504240101_pi300-10000_pass1_cl_src22.arf
[Wed Jun 20 07:57:21 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun 20 07:57:21 2012] Updating source flux to 3.2e-14
[Wed Jun 20 07:57:24 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting