[Fri Feb 17 02:27:14 2012] Detection parameters:
  Position = (354.6, 287.8) = 19 18 2.91 14 45 46.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 415.3 +/- 26.3
  Background counts = 62.3
  Rate = 0.02 +/- 0.001

[Fri Feb 17 02:27:14 2012] Off-axis axis estimate = 4.14'
[Fri Feb 17 02:38:59 2012] Using EEF radius (= 8.50 ")to estimate initial spatial extent for simple fitting
[Fri Feb 17 02:38:59 2012] Initial guess for spatial extent in simple fitting = 8.50"
[Fri Feb 17 02:38:59 2012] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.038
[Fri Feb 17 02:38:59 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 8.50"
[Fri Feb 17 02:45:07 2012] fullrun_mos1_xmm0504230201_pi300-10000_cl_pass0_src1.ximg exists
[Fri Feb 17 02:45:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504230201_pi300-10000_cl_pass0_src1.csv
[Fri Feb 17 02:45:07 2012] fullrun_mos1_xmm0504230201_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri Feb 17 02:45:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504230201_pi300-10000_cl_pass0_src1.csv
[Fri Feb 17 02:45:07 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0504230201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0504230201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 17 02:45:07 2012] fullrun_mos1_xmm0504230201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri Feb 17 02:45:07 2012] fullrun_mos1_xmm0504230201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Feb 17 02:45:07 2012] Fit fullrun_mos1_xmm0504230201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Feb 17 02:52:04 2012] Spatial fit model total counts = 471.044000, observed total counts = 472.000000
[Fri Feb 17 02:52:04 2012] Offset between fit and detection position for source 1 = 0.075220 pixels
[Fri Feb 17 02:52:04 2012] 457.042000 total counts/ 168.039000 bgd. counts: snr = 22.294478
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.075220 pixels
  Position = (354.5, 287.7) = 19 18 2.92 14 45 47.3
  Extent = 6.2 (5.4-6.9)", rotation angle = 0
  Source counts = 289.0 +/- 21.4
  Background counts = 168.0
  Rate = 0.01 +/- 0.001
[Fri Feb 17 02:52:04 2012] Vigneting correction estimate = 1.000000
[Fri Feb 17 02:52:04 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 17 02:52:04 2012] Assessing source extent using major axis lower bound
[Fri Feb 17 02:52:04 2012] Source does appear to be extended
[Fri Feb 17 02:52:04 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Feb 17 03:01:26 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Feb 17 03:01:26 2012] Initial guess for spatial extent in simple fitting = 6.17"
[Fri Feb 17 03:01:26 2012] source mask rpix=1.4, npix_max = 14, mask sum = 12, frac = 0.815
[Fri Feb 17 03:01:26 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 6.17"
[Fri Feb 17 03:08:03 2012] fullrun_mos1_xmm0504230201_pi300-10000_cl_pass1_src1.ximg exists
[Fri Feb 17 03:08:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504230201_pi300-10000_cl_pass1_src1.csv
[Fri Feb 17 03:08:03 2012] fullrun_mos1_xmm0504230201_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Feb 17 03:08:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0504230201_pi300-10000_cl_pass1_src1.csv
[Fri Feb 17 03:08:03 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0504230201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0504230201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 17 03:08:03 2012] fullrun_mos1_xmm0504230201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Feb 17 03:08:03 2012] fullrun_mos1_xmm0504230201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Feb 17 03:08:03 2012] Fit fullrun_mos1_xmm0504230201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Feb 17 03:12:45 2012] Spatial fit model total counts = 457.896000, observed total counts = 464.000000
[Fri Feb 17 03:12:45 2012] Offset between fit and detection position for source 1 = 0.026815 pixels
[Fri Feb 17 03:12:45 2012] 443.996000 total counts/ 159.316000 bgd. counts: snr = 22.554191
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.026815 pixels
  Position = (354.5, 287.7) = 19 18 2.92 14 45 47.2
  Extent = 6.2 (5.3-6.9)", rotation angle = 0
  Source counts = 284.7 +/- 21.1
  Background counts = 159.3
  Rate = 0.01 +/- 0.001
[Fri Feb 17 03:12:45 2012] Vigneting correction estimate = 1.000000
[Fri Feb 17 03:12:45 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 17 03:12:45 2012] Assessing source extent using major axis lower bound
[Fri Feb 17 03:12:45 2012] Source does appear to be extended
[Fri Feb 17 03:12:45 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Feb 17 03:26:12 2012] XMMSAS src. selection expression = ellipse(30795.795600, 24984.843600, 369.818039, 369.818039, 0.000000, X, Y)
[Fri Feb 17 03:26:12 2012] Writing source region out to fullrun_mos1_xmm0504230201_pi300-10000_pass1_cl_src1_src.reg
[Fri Feb 17 03:26:12 2012] Extracting stamp from image fullrun_mos1_xmm0504230201_pi300-10000_cl_sm2.00.img.gz, (333, 266) - (376, 309)
[Fri Feb 17 03:26:12 2012] XMMSAS bgd. selection expression = annulus(30795.795600, 24984.843600, 616.363399, 1232.726798, X, Y)
[Fri Feb 17 03:26:12 2012] Writing fullrun_mos1_xmm0504230201_pi300-10000_pass1_cl_src1.gif
[Fri Feb 17 03:26:14 2012] Mean detx,y = (-359.44, -6222.16) 
[Fri Feb 17 03:26:15 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Feb 17 03:26:32 2012] Binned source spectrum to 10 counts/bin
[Fri Feb 17 03:26:32 2012] Setting source spectrum file to fullrun_mos1_xmm0504230201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Feb 17 03:26:32 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0504230201_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Fri Feb 17 03:40:47 2012] Updating aperture counts using extracted products
[Fri Feb 17 03:40:47 2012] Error reading totcts from fullrun_mos1_xmm0504230201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Feb 17 03:40:47 2012] Calculating source flux in energy range 0.30-8.00
[Fri Feb 17 03:40:47 2012] Using photon index=1.80, rate=0.0133, arf fullrun_mos1_xmm0504230201_pi300-10000_pass1_cl_src1.arf
[Fri Feb 17 03:40:47 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Feb 17 03:40:47 2012] Updating source flux to 2e-13
[Fri Feb 17 03:40:58 2012] Reading fit data from xmm0504230201/analysis//spectral/fullrun_mos1_xmm0504230201_pi300-10000_pass1_cl_src1_pl.csv
[Fri Feb 17 03:40:58 2012] Spectral fit parameter nH value = 6.23916e+21
[Fri Feb 17 03:40:58 2012] Spectral fit parameter PhoIndex value = 6.6012
[Fri Feb 17 03:40:58 2012] Failed to get F(0.3-8.0) from xmm0504230201/analysis//spectral/fullrun_mos1_xmm0504230201_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Fri Feb 17 03:40:58 2012] Calculating source flux in energy range 0.30-8.00
[Fri Feb 17 03:40:58 2012] Using Nh = 6.2e+21, photon index=6.60, rate=0.0133, arf fullrun_mos1_xmm0504230201_pi300-10000_pass1_cl_src1.arf
[Fri Feb 17 03:40:58 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Feb 17 03:40:58 2012] Updating source flux to 1.2e-13