[Sun Apr 29 13:47:59 2012] Detection parameters:
  Position = (353.4, 311.0) = 0 57 15.33 -26 16 27.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 147.4 +/- 25.6
  Background counts = 214.8
  Rate = 0.003 +/- 0.0006

[Sun Apr 29 13:48:00 2012] Off-axis axis estimate = 4.09'
[Sun Apr 29 13:51:20 2012] Using EEF radius (= 8.47 ")to estimate initial spatial extent for simple fitting
[Sun Apr 29 13:51:20 2012] Initial guess for spatial extent in simple fitting = 8.47"
[Sun Apr 29 13:51:20 2012] source mask rpix=1.9, npix_max = 23, mask sum = 20, frac = 0.834
[Sun Apr 29 13:51:20 2012] Giving source the simple spatial ID 60 for pass 0, mean size = 8.47"
[Sun Apr 29 16:28:14 2012] fullrun_pn_xmm0504160101_pi300-10000_cl_pass0_src60.ximg exists
[Sun Apr 29 16:28:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504160101_pi300-10000_cl_pass0_src60.csv
[Sun Apr 29 16:28:14 2012] fullrun_pn_xmm0504160101_pi300-10000_cl_pass0_src60_1.ximg exists
[Sun Apr 29 16:28:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504160101_pi300-10000_cl_pass0_src60.csv
[Sun Apr 29 16:28:14 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0504160101_pi300-10000_cl_pass0_src60_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0504160101_pi300-10000_cl_pass0_src60.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Apr 29 16:28:15 2012] fullrun_pn_xmm0504160101_pi300-10000_cl_pass0_tfrozen_src60.ximg exists
[Sun Apr 29 16:28:15 2012] fullrun_pn_xmm0504160101_pi300-10000_cl_pass0_tfrozen_src60_1.ximg exists
[Sun Apr 29 16:28:15 2012] Fit fullrun_pn_xmm0504160101_pi300-10000_cl_pass0_tfrozen_src60 appears to have run properly
[Sun Apr 29 20:41:06 2012] Source 60 is offset by -5.695988 and -4.420953 pixels which is larger than
2 X fitted extent = 3.512225 x 3.512225, not incorporating fit results
[Sun Apr 29 20:41:06 2012] Vigneting correction estimate = 1.000000
[Sun Apr 29 20:41:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Apr 29 20:41:06 2012] Assessing source extent using major
[Sun Apr 29 20:41:06 2012] Source does appear to be extended
[Sun Apr 29 20:41:06 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Apr 29 20:41:06 2012] Source is confused with source 42
[Sun Apr 29 20:41:41 2012] Using EEF radius (= 8.47 ")to estimate initial spatial extent for simple fitting
[Sun Apr 29 20:41:41 2012] Initial guess for spatial extent in simple fitting = 8.47"
[Sun Apr 29 20:41:41 2012] source mask rpix=1.9, npix_max = 23, mask sum = 20, frac = 0.834
[Sun Apr 29 20:41:41 2012] Giving source the simple spatial ID 59 for pass 1, mean size = 8.47"
[Sun Apr 29 23:18:30 2012] fullrun_pn_xmm0504160101_pi300-10000_cl_pass1_src59.ximg exists
[Sun Apr 29 23:18:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504160101_pi300-10000_cl_pass1_src59.csv
[Sun Apr 29 23:18:30 2012] fullrun_pn_xmm0504160101_pi300-10000_cl_pass1_src59_1.ximg exists
[Sun Apr 29 23:18:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504160101_pi300-10000_cl_pass1_src59.csv
[Sun Apr 29 23:18:30 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0504160101_pi300-10000_cl_pass1_src59_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0504160101_pi300-10000_cl_pass1_src59.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Apr 29 23:18:31 2012] fullrun_pn_xmm0504160101_pi300-10000_cl_pass1_tfrozen_src59.ximg exists
[Sun Apr 29 23:18:31 2012] fullrun_pn_xmm0504160101_pi300-10000_cl_pass1_tfrozen_src59_1.ximg exists
[Sun Apr 29 23:18:31 2012] Fit fullrun_pn_xmm0504160101_pi300-10000_cl_pass1_tfrozen_src59 appears to have run properly
[Mon Apr 30 02:29:27 2012] Source 60 is offset by -5.795023 and -4.436263 pixels which is larger than
2 X fitted extent = 3.748506 x 3.748506, not incorporating fit results
[Mon Apr 30 02:29:28 2012] Vigneting correction estimate = 1.000000
[Mon Apr 30 02:29:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Apr 30 02:29:28 2012] Assessing source extent using major
[Mon Apr 30 02:29:28 2012] Source does appear to be extended
[Mon Apr 30 02:29:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Apr 30 02:30:00 2012] XMMSAS src. selection expression = ellipse(30699.989014, 27008.399109, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Apr 30 02:30:00 2012] Writing source region out to fullrun_pn_xmm0504160101_pi300-10000_pass1_cl_src60_src.reg
[Mon Apr 30 02:30:00 2012] Extracting stamp from image fullrun_pn_xmm0504160101_pi300-10000_cl_sm2.00.img.gz, (316, 273) - (391, 348)
[Mon Apr 30 02:30:00 2012] XMMSAS bgd. selection expression = annulus(30699.989014, 27008.399109, 1087.500000, 2175.000000, X, Y) && !ellipse(28662.485016, 26489.024933, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29562.242000, 26908.770000, 1184.912034, 1184.912034, 0.000000, X, Y) && !ellipse(28730.578000, 27774.776000, 1251.448036, 1251.448036, 0.000000, X, Y) && !ellipse(28263.396942, 28295.411285, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30239.848541, 27262.142914, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27731.953003, 28387.747894, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32027.768800, 28281.227800, 432.228812, 432.228812, 0.000000, X, Y) && !ellipse(30207.807648, 27858.818268, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32232.270000, 26832.252000, 1483.576043, 1483.576043, 0.000000, X, Y)
[Mon Apr 30 02:30:00 2012] Writing fullrun_pn_xmm0504160101_pi300-10000_pass1_cl_src60.gif
[Mon Apr 30 03:24:04 2012] Mean detx,y = (2080.55, -2208.73) 
[Mon Apr 30 03:24:09 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Apr 30 03:24:32 2012] Binned source spectrum to 10 counts/bin
[Mon Apr 30 03:24:33 2012] Setting source spectrum file to fullrun_pn_xmm0504160101_pi300-10000_pass1_cl_src60_src_b10.pi.gz
[Mon Apr 30 03:24:33 2012] Setting bgd. spectrum file to fullrun_pn_xmm0504160101_pi300-10000_pass1_cl_src60_bgd.pi.gz
[Mon Apr 30 05:38:28 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Apr 30 05:38:28 2012] rmf not generated due to insufficient counts
[Mon Apr 30 09:03:48 2012] Updating aperture counts using extracted products
[Mon Apr 30 09:03:48 2012] Error reading totcts from fullrun_pn_xmm0504160101_pi300-10000_pass1_cl_src60_src_b10.pi.gz
[Mon Apr 30 09:03:53 2012] Calculating source flux in energy range 0.30-8.00
[Mon Apr 30 09:03:53 2012] Using photon index=1.80, rate=0.00334, arf fullrun_pn_xmm0504160101_pi300-10000_pass1_cl_src60.arf
[Mon Apr 30 09:03:53 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Apr 30 09:03:53 2012] Updating source flux to 1e-14
[Mon Apr 30 09:06:36 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting