[Sun Apr 29 13:47:59 2012] Detection parameters:
  Position = (239.2, 352.9) = 0 57 52.27 -26 13 24.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 105.1 +/- 18.1
  Background counts = 102.0
  Rate = 0.004 +/- 0.0006

[Sun Apr 29 13:48:00 2012] Off-axis axis estimate = 5.83'
[Sun Apr 29 13:51:20 2012] Using EEF radius (= 9.35 ")to estimate initial spatial extent for simple fitting
[Sun Apr 29 13:51:20 2012] Initial guess for spatial extent in simple fitting = 9.35"
[Sun Apr 29 13:51:20 2012] source mask rpix=2.1, npix_max = 28, mask sum = 29, frac = 1.034
[Sun Apr 29 13:51:20 2012] Giving source the simple spatial ID 55 for pass 0, mean size = 9.35"
[Sun Apr 29 16:28:14 2012] fullrun_pn_xmm0504160101_pi300-10000_cl_pass0_src55.ximg exists
[Sun Apr 29 16:28:14 2012] fullrun_pn_xmm0504160101_pi300-10000_cl_pass0_src55_1.ximg exists
[Sun Apr 29 16:28:14 2012] Fit fullrun_pn_xmm0504160101_pi300-10000_cl_pass0_src55 appears to have run properly
[Sun Apr 29 16:28:15 2012] fullrun_pn_xmm0504160101_pi300-10000_cl_pass0_tfrozen_src55.ximg exists
[Sun Apr 29 16:28:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504160101_pi300-10000_cl_pass0_tfrozen_src55.csv
[Sun Apr 29 16:28:15 2012] fullrun_pn_xmm0504160101_pi300-10000_cl_pass0_tfrozen_src55_1.ximg exists
[Sun Apr 29 16:28:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504160101_pi300-10000_cl_pass0_tfrozen_src55.csv
[Sun Apr 29 16:28:15 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0504160101_pi300-10000_cl_pass0_tfrozen_src55_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0504160101_pi300-10000_cl_pass0_tfrozen_src55.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Apr 29 20:41:06 2012] Source 55 is offset by 6.376094 and -5.999917 pixels which is larger than
2 X fitted extent = 1.124713 x 1.124713, not incorporating fit results
[Sun Apr 29 20:41:06 2012] Vigneting correction estimate = 1.000000
[Sun Apr 29 20:41:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Apr 29 20:41:06 2012] Assessing source extent using major
[Sun Apr 29 20:41:06 2012] Source does appear to be extended
[Sun Apr 29 20:41:06 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Apr 29 20:41:41 2012] Using EEF radius (= 9.35 ")to estimate initial spatial extent for simple fitting
[Sun Apr 29 20:41:41 2012] Initial guess for spatial extent in simple fitting = 9.35"
[Sun Apr 29 20:41:41 2012] source mask rpix=2.1, npix_max = 28, mask sum = 29, frac = 1.034
[Sun Apr 29 20:41:41 2012] Giving source the simple spatial ID 54 for pass 1, mean size = 9.35"
[Sun Apr 29 23:18:30 2012] fullrun_pn_xmm0504160101_pi300-10000_cl_pass1_src54.ximg exists
[Sun Apr 29 23:18:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504160101_pi300-10000_cl_pass1_src54.csv
[Sun Apr 29 23:18:30 2012] fullrun_pn_xmm0504160101_pi300-10000_cl_pass1_src54_1.ximg exists
[Sun Apr 29 23:18:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504160101_pi300-10000_cl_pass1_src54.csv
[Sun Apr 29 23:18:30 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0504160101_pi300-10000_cl_pass1_src54_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0504160101_pi300-10000_cl_pass1_src54.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Apr 29 23:18:31 2012] fullrun_pn_xmm0504160101_pi300-10000_cl_pass1_tfrozen_src54.ximg exists
[Sun Apr 29 23:18:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504160101_pi300-10000_cl_pass1_tfrozen_src54.csv
[Sun Apr 29 23:18:31 2012] fullrun_pn_xmm0504160101_pi300-10000_cl_pass1_tfrozen_src54_1.ximg exists
[Sun Apr 29 23:18:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504160101_pi300-10000_cl_pass1_tfrozen_src54.csv
[Sun Apr 29 23:18:31 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0504160101_pi300-10000_cl_pass1_tfrozen_src54_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0504160101_pi300-10000_cl_pass1_tfrozen_src54.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Apr 30 02:29:27 2012] Warning: source 54 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 55 at 11.246903 pixels away
[Mon Apr 30 02:29:28 2012] Vigneting correction estimate = 1.000000
[Mon Apr 30 02:29:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Apr 30 02:29:28 2012] Assessing source extent using major
[Mon Apr 30 02:29:28 2012] Source does appear to be extended
[Mon Apr 30 02:29:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Apr 30 02:30:00 2012] XMMSAS src. selection expression = ellipse(20760.888168, 30652.031219, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Apr 30 02:30:00 2012] Writing source region out to fullrun_pn_xmm0504160101_pi300-10000_pass1_cl_src55_src.reg
[Mon Apr 30 02:30:00 2012] Extracting stamp from image fullrun_pn_xmm0504160101_pi300-10000_cl_sm2.00.img.gz, (202, 315) - (277, 390)
[Mon Apr 30 02:30:00 2012] XMMSAS bgd. selection expression = annulus(20760.888168, 30652.031219, 1087.500000, 2175.000000, X, Y) && !ellipse(23063.532684, 30726.072021, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18532.763687, 32979.416626, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19566.215256, 27808.492188, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Apr 30 02:30:00 2012] Writing fullrun_pn_xmm0504160101_pi300-10000_pass1_cl_src55.gif
[Mon Apr 30 03:19:51 2012] Mean detx,y = (-8086.16, 760.85) 
[Mon Apr 30 03:19:57 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Apr 30 03:20:34 2012] Binned source spectrum to 10 counts/bin
[Mon Apr 30 03:20:35 2012] Setting source spectrum file to fullrun_pn_xmm0504160101_pi300-10000_pass1_cl_src55_src_b10.pi.gz
[Mon Apr 30 03:20:35 2012] Setting bgd. spectrum file to fullrun_pn_xmm0504160101_pi300-10000_pass1_cl_src55_bgd.pi.gz
[Mon Apr 30 05:37:13 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Apr 30 05:37:13 2012] rmf not generated due to insufficient counts
[Mon Apr 30 09:03:47 2012] Updating aperture counts using extracted products
[Mon Apr 30 09:03:47 2012] Error reading totcts from fullrun_pn_xmm0504160101_pi300-10000_pass1_cl_src55_src_b10.pi.gz
[Mon Apr 30 09:03:52 2012] Calculating source flux in energy range 0.30-8.00
[Mon Apr 30 09:03:52 2012] Using photon index=1.80, rate=0.00364, arf fullrun_pn_xmm0504160101_pi300-10000_pass1_cl_src55.arf
[Mon Apr 30 09:03:52 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Apr 30 09:03:52 2012] Updating source flux to 1.7e-14
[Mon Apr 30 09:06:36 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting