[Sun Apr 29 13:47:57 2012] Detection parameters:
  Position = (336.6, 311.4) = 0 57 20.79 -26 16 26.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 706.9 +/- 36.3
  Background counts = 232.9
  Rate = 0.02 +/- 0.001

[Sun Apr 29 13:48:00 2012] Off-axis axis estimate = 2.92'
[Sun Apr 29 13:51:20 2012] Using EEF radius (= 7.89 ")to estimate initial spatial extent for simple fitting
[Sun Apr 29 13:51:20 2012] Initial guess for spatial extent in simple fitting = 7.89"
[Sun Apr 29 13:51:20 2012] source mask rpix=1.8, npix_max = 21, mask sum = 12, frac = 0.561
[Sun Apr 29 13:51:20 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 7.89"
[Sun Apr 29 16:28:13 2012] fullrun_pn_xmm0504160101_pi300-10000_cl_pass0_src5.ximg exists
[Sun Apr 29 16:28:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504160101_pi300-10000_cl_pass0_src5.csv
[Sun Apr 29 16:28:13 2012] fullrun_pn_xmm0504160101_pi300-10000_cl_pass0_src5_1.ximg exists
[Sun Apr 29 16:28:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504160101_pi300-10000_cl_pass0_src5.csv
[Sun Apr 29 16:28:13 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0504160101_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0504160101_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Apr 29 16:28:14 2012] fullrun_pn_xmm0504160101_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Sun Apr 29 16:28:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504160101_pi300-10000_cl_pass0_tfrozen_src5.csv
[Sun Apr 29 16:28:14 2012] fullrun_pn_xmm0504160101_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Sun Apr 29 16:28:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504160101_pi300-10000_cl_pass0_tfrozen_src5.csv
[Sun Apr 29 16:28:14 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0504160101_pi300-10000_cl_pass0_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0504160101_pi300-10000_cl_pass0_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Apr 29 20:41:06 2012] Warning, spatial fit 5 centroid is now closest to src. 59
[Sun Apr 29 20:41:06 2012] Spatial fit model total counts = 3251.680000, observed total counts = 3180.000000
[Sun Apr 29 20:41:06 2012] Offset between fit and detection position for source 5 = 4.072879 pixels
[Sun Apr 29 20:41:06 2012] Warning, changing simple spatial fit ID from 5 to 42
[Sun Apr 29 20:41:06 2012] 3162.651000 total counts/ 2958.110000 bgd. counts: snr = 3.760739
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 4.072879 pixels
  Position = (340.4, 310.0) = 0 57 19.56 -26 16 33.3
  Extent = 13.0 (8.5-16.6)", rotation angle = 0
  Source counts = 204.5 +/- 56.2
  Background counts = 2958.1
  Rate = 0.004 +/- 0.001
[Sun Apr 29 20:41:06 2012] Spatial fit model total counts = 2704.560000, observed total counts = 2385.000000
[Sun Apr 29 20:41:06 2012] Poor agreement between spatial fit and data for source 5
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Apr 29 20:41:06 2012] Vigneting correction estimate = 1.000000
[Sun Apr 29 20:41:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Apr 29 20:41:06 2012] Assessing source extent using major axis lower bound
[Sun Apr 29 20:41:06 2012] Source does appear to be extended
[Sun Apr 29 20:41:06 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Apr 29 20:41:06 2012] Source is confused with source 42
[Sun Apr 29 20:41:41 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Apr 29 20:41:41 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Apr 29 20:41:41 2012] Initial guess for spatial extent in simple fitting = 13.01"
[Sun Apr 29 20:41:41 2012] source mask rpix=3.0, npix_max = 48, mask sum = 37, frac = 0.759
[Sun Apr 29 20:41:41 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 13.01"
[Sun Apr 29 23:18:29 2012] fullrun_pn_xmm0504160101_pi300-10000_cl_pass1_src5.ximg exists
[Sun Apr 29 23:18:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504160101_pi300-10000_cl_pass1_src5.csv
[Sun Apr 29 23:18:29 2012] fullrun_pn_xmm0504160101_pi300-10000_cl_pass1_src5_1.ximg exists
[Sun Apr 29 23:18:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504160101_pi300-10000_cl_pass1_src5.csv
[Sun Apr 29 23:18:29 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0504160101_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0504160101_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Apr 29 23:18:30 2012] fullrun_pn_xmm0504160101_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Sun Apr 29 23:18:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504160101_pi300-10000_cl_pass1_tfrozen_src5.csv
[Sun Apr 29 23:18:30 2012] fullrun_pn_xmm0504160101_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Sun Apr 29 23:18:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504160101_pi300-10000_cl_pass1_tfrozen_src5.csv
[Sun Apr 29 23:18:30 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0504160101_pi300-10000_cl_pass1_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0504160101_pi300-10000_cl_pass1_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Apr 30 02:29:27 2012] Warning, spatial fit 5 centroid is now closest to src. 1
[Mon Apr 30 02:29:27 2012] Source 5 is offset by 3.916115 and -2.780299 pixels which is larger than
2 X fitted extent = 1.153614 x 1.153614, not incorporating fit results
[Mon Apr 30 02:29:27 2012] Spatial fit model total counts = 3240.570000, observed total counts = 3180.000000
[Mon Apr 30 02:29:27 2012] Offset between fit and detection position for source 5 = 0.107793 pixels
[Mon Apr 30 02:29:27 2012] Warning, changing simple spatial fit ID from 5 to 42
[Mon Apr 30 02:29:27 2012] 3153.434000 total counts/ 2924.170000 bgd. counts: snr = 4.239694
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.107793 pixels
  Position = (340.4, 309.9) = 0 57 19.56 -26 16 33.8
  Extent = 14.8 (11.2-16.6)", rotation angle = 0
  Source counts = 229.3 +/- 56.2
  Background counts = 2924.2
  Rate = 0.005 +/- 0.001
[Mon Apr 30 02:29:28 2012] Vigneting correction estimate = 1.000000
[Mon Apr 30 02:29:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Apr 30 02:29:28 2012] Assessing source extent using major axis lower bound
[Mon Apr 30 02:29:28 2012] Source does appear to be extended
[Mon Apr 30 02:29:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Apr 30 02:29:59 2012] XMMSAS src. selection expression = ellipse(29562.242000, 26908.770000, 888.684026, 888.684026, 0.000000, X, Y)
[Mon Apr 30 02:29:59 2012] Writing source region out to fullrun_pn_xmm0504160101_pi300-10000_pass1_cl_src5_src.reg
[Mon Apr 30 02:29:59 2012] Extracting stamp from image fullrun_pn_xmm0504160101_pi300-10000_cl_sm2.00.img.gz, (289, 259) - (391, 361)
[Mon Apr 30 02:29:59 2012] XMMSAS bgd. selection expression = annulus(29562.242000, 26908.770000, 1481.140043, 2962.280085, X, Y) && !ellipse(28662.485016, 26489.024933, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28730.578000, 27774.776000, 1251.448036, 1251.448036, 0.000000, X, Y) && !ellipse(27451.398712, 27005.351135, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26991.879517, 26664.668396, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26478.224000, 25706.968000, 322.485609, 322.485609, 0.000000, X, Y) && !ellipse(32690.275970, 23625.944885, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32677.744232, 30135.120911, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28263.396942, 28295.411285, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30239.848541, 27262.142914, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26141.500183, 27176.895233, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26478.181793, 26574.766449, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28939.197479, 23447.099457, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27731.953003, 28387.747894, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32027.768800, 28281.227800, 432.228812, 432.228812, 0.000000, X, Y) && !ellipse(30207.807648, 27858.818268, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30699.989014, 27008.399109, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32232.270000, 26832.252000, 1483.576043, 1483.576043, 0.000000, X, Y) && !ellipse(25950.141602, 25382.225525, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26485.175140, 25012.908295, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27497.351959, 25005.187469, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Apr 30 02:29:59 2012] Writing fullrun_pn_xmm0504160101_pi300-10000_pass1_cl_src5.gif
[Mon Apr 30 02:38:49 2012] Mean detx,y = (1280.73, -1419.07) 
[Mon Apr 30 02:38:54 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Apr 30 02:39:21 2012] Binned source spectrum to 10 counts/bin
[Mon Apr 30 02:39:21 2012] Setting source spectrum file to fullrun_pn_xmm0504160101_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Mon Apr 30 02:39:21 2012] Setting bgd. spectrum file to fullrun_pn_xmm0504160101_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Mon Apr 30 09:03:45 2012] Updating aperture counts using extracted products
[Mon Apr 30 09:03:45 2012] Error reading totcts from fullrun_pn_xmm0504160101_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Mon Apr 30 09:03:50 2012] Calculating source flux in energy range 0.30-8.00
[Mon Apr 30 09:03:50 2012] Using photon index=1.80, rate=0.00464, arf fullrun_pn_xmm0504160101_pi300-10000_pass1_cl_src5.arf
[Mon Apr 30 09:03:50 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Apr 30 09:03:50 2012] Updating source flux to 1.2e-14
[Mon Apr 30 09:06:36 2012] Flag b found in src. 5 procflags, skipping spectral fitting
[Mon Apr 30 09:06:36 2012] Flag p found in src. 5 procflags, skipping spectral fitting
[Mon Apr 30 09:06:36 2012] Flag c found in src. 5 procflags, skipping spectral fitting
[Mon Apr 30 09:10:02 2012] Reading fit data from xmm0504160101/analysis//spectral/fullrun_pn_xmm0504160101_pi300-10000_pass1_cl_src5_pl.csv
[Mon Apr 30 09:10:02 2012] Spectral fit parameter nH value = 7.4772e+20
[Mon Apr 30 09:10:02 2012] Spectral fit parameter PhoIndex value = 2.00403
[Mon Apr 30 09:10:02 2012] Failed to get F(0.3-8.0) from xmm0504160101/analysis//spectral/fullrun_pn_xmm0504160101_pi300-10000_pass1_cl_src5_pl.csv, possibly due to different flux energy range selected
[Mon Apr 30 09:10:02 2012] Calculating source flux in energy range 0.30-8.00
[Mon Apr 30 09:10:02 2012] Using Nh = 7.5e+20, photon index=2.00, rate=0.00464, arf fullrun_pn_xmm0504160101_pi300-10000_pass1_cl_src5.arf
[Mon Apr 30 09:10:02 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Apr 30 09:10:02 2012] Updating source flux to 1.3e-14