[Sun Apr 29 13:47:59 2012] Detection parameters:
  Position = (301.0, 312.9) = 0 57 32.28 -26 16 16.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 220.1 +/- 27.1
  Background counts = 181.2
  Rate = 0.005 +/- 0.0006

[Sun Apr 29 13:48:00 2012] Off-axis axis estimate = 1.07'
[Sun Apr 29 13:51:20 2012] Using EEF radius (= 6.96 ")to estimate initial spatial extent for simple fitting
[Sun Apr 29 13:51:20 2012] Initial guess for spatial extent in simple fitting = 6.96"
[Sun Apr 29 13:51:20 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.907
[Sun Apr 29 13:51:20 2012] Giving source the simple spatial ID 43 for pass 0, mean size = 6.96"
[Sun Apr 29 16:28:14 2012] fullrun_pn_xmm0504160101_pi300-10000_cl_pass0_src43.ximg exists
[Sun Apr 29 16:28:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504160101_pi300-10000_cl_pass0_src43.csv
[Sun Apr 29 16:28:14 2012] fullrun_pn_xmm0504160101_pi300-10000_cl_pass0_src43_1.ximg exists
[Sun Apr 29 16:28:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504160101_pi300-10000_cl_pass0_src43.csv
[Sun Apr 29 16:28:14 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0504160101_pi300-10000_cl_pass0_src43_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0504160101_pi300-10000_cl_pass0_src43.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Apr 29 16:28:15 2012] fullrun_pn_xmm0504160101_pi300-10000_cl_pass0_tfrozen_src43.ximg exists
[Sun Apr 29 16:28:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504160101_pi300-10000_cl_pass0_tfrozen_src43.csv
[Sun Apr 29 16:28:15 2012] fullrun_pn_xmm0504160101_pi300-10000_cl_pass0_tfrozen_src43_1.ximg exists
[Sun Apr 29 16:28:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504160101_pi300-10000_cl_pass0_tfrozen_src43.csv
[Sun Apr 29 16:28:15 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0504160101_pi300-10000_cl_pass0_tfrozen_src43_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0504160101_pi300-10000_cl_pass0_tfrozen_src43.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Apr 29 20:41:06 2012] Spatial fit model total counts = 2584.380000, observed total counts = 2236.000000
[Sun Apr 29 20:41:06 2012] Poor agreement between spatial fit and data for source 43
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Apr 29 20:41:06 2012] Vigneting correction estimate = 1.000000
[Sun Apr 29 20:41:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Apr 29 20:41:06 2012] Assessing source extent using major
[Sun Apr 29 20:41:06 2012] Source does appear to be extended
[Sun Apr 29 20:41:06 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Apr 29 20:41:41 2012] Using EEF radius (= 6.96 ")to estimate initial spatial extent for simple fitting
[Sun Apr 29 20:41:41 2012] Initial guess for spatial extent in simple fitting = 6.96"
[Sun Apr 29 20:41:41 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.907
[Sun Apr 29 20:41:41 2012] Giving source the simple spatial ID 43 for pass 1, mean size = 6.96"
[Sun Apr 29 23:18:30 2012] fullrun_pn_xmm0504160101_pi300-10000_cl_pass1_src43.ximg exists
[Sun Apr 29 23:18:30 2012] fullrun_pn_xmm0504160101_pi300-10000_cl_pass1_src43_1.ximg exists
[Sun Apr 29 23:18:30 2012] Fit fullrun_pn_xmm0504160101_pi300-10000_cl_pass1_src43 appears to have run properly
[Sun Apr 29 23:18:31 2012] fullrun_pn_xmm0504160101_pi300-10000_cl_pass1_tfrozen_src43.ximg exists
[Sun Apr 29 23:18:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504160101_pi300-10000_cl_pass1_tfrozen_src43.csv
[Sun Apr 29 23:18:31 2012] fullrun_pn_xmm0504160101_pi300-10000_cl_pass1_tfrozen_src43_1.ximg exists
[Sun Apr 29 23:18:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504160101_pi300-10000_cl_pass1_tfrozen_src43.csv
[Sun Apr 29 23:18:31 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0504160101_pi300-10000_cl_pass1_tfrozen_src43_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0504160101_pi300-10000_cl_pass1_tfrozen_src43.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Apr 30 02:29:27 2012] Source 43 is offset by -6.058825 and -2.919004 pixels which is larger than
2 X fitted extent = 0.780428 x 0.780428, not incorporating fit results
[Mon Apr 30 02:29:28 2012] Vigneting correction estimate = 1.000000
[Mon Apr 30 02:29:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Apr 30 02:29:28 2012] Assessing source extent using major
[Mon Apr 30 02:29:28 2012] Source does appear to be extended
[Mon Apr 30 02:29:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Apr 30 02:30:00 2012] XMMSAS src. selection expression = ellipse(26141.500183, 27176.895233, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Apr 30 02:30:00 2012] Writing source region out to fullrun_pn_xmm0504160101_pi300-10000_pass1_cl_src43_src.reg
[Mon Apr 30 02:30:00 2012] Extracting stamp from image fullrun_pn_xmm0504160101_pi300-10000_cl_sm2.00.img.gz, (264, 275) - (339, 350)
[Mon Apr 30 02:30:00 2012] XMMSAS bgd. selection expression = annulus(26141.500183, 27176.895233, 1087.500000, 2175.000000, X, Y) && !ellipse(28662.485016, 26489.024933, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28730.578000, 27774.776000, 1251.448036, 1251.448036, 0.000000, X, Y) && !ellipse(27451.398712, 27005.351135, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26991.879517, 26664.668396, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26478.224000, 25706.968000, 322.485609, 322.485609, 0.000000, X, Y) && !ellipse(28263.396942, 28295.411285, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26478.181793, 26574.766449, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27731.953003, 28387.747894, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25950.141602, 25382.225525, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24977.747742, 25346.478210, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26485.175140, 25012.908295, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27497.351959, 25005.187469, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Apr 30 02:30:00 2012] Writing fullrun_pn_xmm0504160101_pi300-10000_pass1_cl_src43.gif
[Mon Apr 30 03:10:10 2012] Mean detx,y = (-1527.34, 323.31) 
[Mon Apr 30 03:10:15 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Apr 30 03:10:43 2012] Binned source spectrum to 10 counts/bin
[Mon Apr 30 03:10:43 2012] Setting source spectrum file to fullrun_pn_xmm0504160101_pi300-10000_pass1_cl_src43_src_b10.pi.gz
[Mon Apr 30 03:10:43 2012] Setting bgd. spectrum file to fullrun_pn_xmm0504160101_pi300-10000_pass1_cl_src43_bgd.pi.gz
[Mon Apr 30 05:23:00 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Apr 30 05:23:00 2012] rmf not generated due to insufficient counts
[Mon Apr 30 09:03:47 2012] Updating aperture counts using extracted products
[Mon Apr 30 09:03:47 2012] Error reading totcts from fullrun_pn_xmm0504160101_pi300-10000_pass1_cl_src43_src_b10.pi.gz
[Mon Apr 30 09:03:52 2012] Calculating source flux in energy range 0.30-8.00
[Mon Apr 30 09:03:52 2012] Using photon index=1.80, rate=0.00504, arf fullrun_pn_xmm0504160101_pi300-10000_pass1_cl_src43.arf
[Mon Apr 30 09:03:52 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Apr 30 09:03:52 2012] Updating source flux to 1.6e-14
[Mon Apr 30 09:06:36 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting