[Sun Apr 29 13:47:57 2012] Detection parameters:
  Position = (330.0, 305.0) = 0 57 22.91 -26 16 53.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1701.6 +/- 56.7
  Background counts = 243.6
  Rate = 0.04 +/- 0.001

[Sun Apr 29 13:48:00 2012] Off-axis axis estimate = 2.34'
[Sun Apr 29 13:51:20 2012] Using EEF radius (= 7.60 ")to estimate initial spatial extent for simple fitting
[Sun Apr 29 13:51:20 2012] Initial guess for spatial extent in simple fitting = 7.60"
[Sun Apr 29 13:51:20 2012] source mask rpix=1.7, npix_max = 20, mask sum = 16, frac = 0.792
[Sun Apr 29 13:51:20 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.60"
[Sun Apr 29 16:28:13 2012] fullrun_pn_xmm0504160101_pi300-10000_cl_pass0_src1.ximg exists
[Sun Apr 29 16:28:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504160101_pi300-10000_cl_pass0_src1.csv
[Sun Apr 29 16:28:13 2012] fullrun_pn_xmm0504160101_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun Apr 29 16:28:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504160101_pi300-10000_cl_pass0_src1.csv
[Sun Apr 29 16:28:13 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0504160101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0504160101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Apr 29 16:28:14 2012] fullrun_pn_xmm0504160101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun Apr 29 16:28:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504160101_pi300-10000_cl_pass0_tfrozen_src1.csv
[Sun Apr 29 16:28:14 2012] fullrun_pn_xmm0504160101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Apr 29 16:28:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504160101_pi300-10000_cl_pass0_tfrozen_src1.csv
[Sun Apr 29 16:28:14 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0504160101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0504160101_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Apr 29 20:41:06 2012] Spatial fit model total counts = 8026.300000, observed total counts = 6678.000000
[Sun Apr 29 20:41:06 2012] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Apr 29 20:41:06 2012] Vigneting correction estimate = 1.000000
[Sun Apr 29 20:41:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Apr 29 20:41:06 2012] Assessing source extent using major
[Sun Apr 29 20:41:06 2012] Source does appear to be extended
[Sun Apr 29 20:41:06 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Apr 29 20:41:41 2012] Using EEF radius (= 7.60 ")to estimate initial spatial extent for simple fitting
[Sun Apr 29 20:41:41 2012] Initial guess for spatial extent in simple fitting = 7.60"
[Sun Apr 29 20:41:41 2012] source mask rpix=1.7, npix_max = 20, mask sum = 16, frac = 0.792
[Sun Apr 29 20:41:41 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 7.60"
[Sun Apr 29 23:18:29 2012] fullrun_pn_xmm0504160101_pi300-10000_cl_pass1_src1.ximg exists
[Sun Apr 29 23:18:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504160101_pi300-10000_cl_pass1_src1.csv
[Sun Apr 29 23:18:29 2012] fullrun_pn_xmm0504160101_pi300-10000_cl_pass1_src1_1.ximg exists
[Sun Apr 29 23:18:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504160101_pi300-10000_cl_pass1_src1.csv
[Sun Apr 29 23:18:29 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0504160101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0504160101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Apr 29 23:18:30 2012] fullrun_pn_xmm0504160101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sun Apr 29 23:18:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504160101_pi300-10000_cl_pass1_tfrozen_src1.csv
[Sun Apr 29 23:18:30 2012] fullrun_pn_xmm0504160101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Apr 29 23:18:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0504160101_pi300-10000_cl_pass1_tfrozen_src1.csv
[Sun Apr 29 23:18:30 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0504160101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0504160101_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Apr 30 02:29:27 2012] Warning, spatial fit 1 centroid is now closest to src. 17
[Mon Apr 30 02:29:27 2012] Spatial fit model total counts = 7354.830000, observed total counts = 5346.000000
[Mon Apr 30 02:29:27 2012] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Apr 30 02:29:28 2012] Vigneting correction estimate = 1.000000
[Mon Apr 30 02:29:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Apr 30 02:29:28 2012] Assessing source extent using major
[Mon Apr 30 02:29:28 2012] Source does appear to be extended
[Mon Apr 30 02:29:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Apr 30 02:29:59 2012] Counts = 1701.570557, rescaling region sizes by 2.000000
[Mon Apr 30 02:29:59 2012] XMMSAS src. selection expression = ellipse(28662.485016, 26489.024933, 1305.000000, 1305.000000, 0.000000, X, Y)
[Mon Apr 30 02:29:59 2012] Writing source region out to fullrun_pn_xmm0504160101_pi300-10000_pass1_cl_src1_src.reg
[Mon Apr 30 02:29:59 2012] Extracting stamp from image fullrun_pn_xmm0504160101_pi300-10000_cl_sm2.00.img.gz, (255, 230) - (405, 380)
[Mon Apr 30 02:29:59 2012] XMMSAS bgd. selection expression = annulus(28662.485016, 26489.024933, 4350.000000, 8700.000000, X, Y) && !ellipse(29562.242000, 26908.770000, 1184.912034, 1184.912034, 0.000000, X, Y) && !ellipse(24073.489800, 20765.696000, 446.815213, 446.815213, 0.000000, X, Y) && !ellipse(37305.590393, 35718.735138, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31596.756000, 34080.002000, 414.902412, 414.902412, 0.000000, X, Y) && !ellipse(23063.532684, 30726.072021, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28730.578000, 27774.776000, 1251.448036, 1251.448036, 0.000000, X, Y) && !ellipse(27451.398712, 27005.351135, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26991.879517, 26664.668396, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26478.224000, 25706.968000, 322.485609, 322.485609, 0.000000, X, Y) && !ellipse(32690.275970, 23625.944885, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36520.190247, 23016.504150, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31686.443008, 20762.683968, 416.630169, 394.034914, 90.028453, X, Y) && !ellipse(34254.874600, 17556.041000, 506.624015, 378.819211, 328.487807, X, Y) && !ellipse(30681.128440, 19452.491600, 483.029614, 483.029614, 0.000000, X, Y) && !ellipse(31925.250519, 34538.043610, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32677.744232, 30135.120911, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28263.396942, 28295.411285, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19566.215256, 27808.492188, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30239.848541, 27262.142914, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26141.500183, 27176.895233, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26478.181793, 26574.766449, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33410.626600, 26205.672520, 441.722413, 441.722413, 0.000000, X, Y) && !ellipse(28939.197479, 23447.099457, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20898.133270, 23154.953308, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25987.690000, 20784.861200, 432.956012, 432.956012, 0.000000, X, Y) && !ellipse(32327.684000, 35250.956000, 1729.256050, 1729.256050, 0.000000, X, Y) && !ellipse(31024.492820, 32513.388400, 497.967214, 497.967214, 0.000000, X, Y) && !ellipse(34630.502350, 31545.331757, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20760.888168, 30652.031219, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27731.953003, 28387.747894, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32027.768800, 28281.227800, 432.228812, 432.228812, 0.000000, X, Y) && !ellipse(20605.810600, 28063.145600, 364.152010, 364.152010, 0.000000, X, Y) && !ellipse(30207.807648, 27858.818268, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30699.989014, 27008.399109, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32232.270000, 26832.252000, 1483.576043, 1483.576043, 0.000000, X, Y) && !ellipse(25950.141602, 25382.225525, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24977.747742, 25346.478210, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26485.175140, 25012.908295, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33344.917760, 24740.231400, 357.090410, 357.090410, 0.000000, X, Y) && !ellipse(27497.351959, 25005.187469, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29793.862030, 16927.748032, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33022.903351, 22347.710236, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38063.853485, 21266.948700, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31941.815247, 20351.372467, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25062.167053, 18542.778458, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29455.224071, 18500.780027, 869.724327, 175.741412, 279.989056, X, Y) && !ellipse(33072.000400, 18121.466600, 738.276821, 370.192811, 81.989095, X, Y)
[Mon Apr 30 02:29:59 2012] Writing fullrun_pn_xmm0504160101_pi300-10000_pass1_cl_src1.gif
[Mon Apr 30 02:30:34 2012] Mean detx,y = (796.06, -538.17) 
[Mon Apr 30 02:30:43 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Apr 30 02:33:24 2012] Binned source spectrum to 10 counts/bin
[Mon Apr 30 02:33:24 2012] Setting source spectrum file to fullrun_pn_xmm0504160101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon Apr 30 02:33:24 2012] Setting bgd. spectrum file to fullrun_pn_xmm0504160101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Mon Apr 30 03:37:20 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Apr 30 03:37:20 2012] rmf not generated due to insufficient counts
[Mon Apr 30 09:03:44 2012] Updating aperture counts using extracted products
[Mon Apr 30 09:03:45 2012] Error reading totcts from fullrun_pn_xmm0504160101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon Apr 30 09:03:49 2012] Calculating source flux in energy range 0.30-8.00
[Mon Apr 30 09:03:49 2012] Using photon index=1.80, rate=0.0375, arf fullrun_pn_xmm0504160101_pi300-10000_pass1_cl_src1.arf
[Mon Apr 30 09:03:49 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Apr 30 09:03:50 2012] Updating source flux to 9e-14
[Mon Apr 30 09:06:36 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon Apr 30 09:10:02 2012] xmm0504160101/analysis//spectral/fullrun_pn_xmm0504160101_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete