[Sun Apr 29 13:48:03 2012] Detection parameters:
  Position = (365.0, 392.7) = 0 57 11.62 -26 10 37.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 130.5 +/- 15.7
  Background counts = 17.8
  Rate = 0.002 +/- 0.0003

[Sun Apr 29 13:48:04 2012] Off-axis axis estimate = 8.36'
[Sun Apr 29 18:28:24 2012] Using EEF radius (= 10.61 ")to estimate initial spatial extent for simple fitting
[Sun Apr 29 18:28:24 2012] Initial guess for spatial extent in simple fitting = 10.61"
[Sun Apr 29 18:28:24 2012] source mask rpix=2.4, npix_max = 34, mask sum = 27, frac = 0.781
[Sun Apr 29 18:28:24 2012] Giving source the simple spatial ID 22 for pass 0, mean size = 10.61"
[Sun Apr 29 20:40:49 2012] fullrun_mos2_xmm0504160101_pi300-10000_cl_pass0_src22.ximg exists
[Sun Apr 29 20:40:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504160101_pi300-10000_cl_pass0_src22.csv
[Sun Apr 29 20:40:49 2012] fullrun_mos2_xmm0504160101_pi300-10000_cl_pass0_src22_1.ximg exists
[Sun Apr 29 20:40:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504160101_pi300-10000_cl_pass0_src22.csv
[Sun Apr 29 20:40:49 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504160101_pi300-10000_cl_pass0_src22_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504160101_pi300-10000_cl_pass0_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Apr 29 20:40:50 2012] fullrun_mos2_xmm0504160101_pi300-10000_cl_pass0_tfrozen_src22.ximg exists
[Sun Apr 29 20:40:50 2012] fullrun_mos2_xmm0504160101_pi300-10000_cl_pass0_tfrozen_src22_1.ximg exists
[Sun Apr 29 20:40:50 2012] Fit fullrun_mos2_xmm0504160101_pi300-10000_cl_pass0_tfrozen_src22 appears to have run properly
[Sun Apr 29 20:41:26 2012] Warning: source 22 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 9 at 14.739095 pixels away
[Sun Apr 29 20:41:26 2012] Vigneting correction estimate = 1.000000
[Sun Apr 29 20:41:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Apr 29 20:41:26 2012] Assessing source extent using major
[Sun Apr 29 20:41:26 2012] Source does appear to be extended
[Sun Apr 29 20:41:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Apr 30 00:46:32 2012] Using EEF radius (= 10.61 ")to estimate initial spatial extent for simple fitting
[Mon Apr 30 00:46:32 2012] Initial guess for spatial extent in simple fitting = 10.61"
[Mon Apr 30 00:46:32 2012] source mask rpix=2.4, npix_max = 34, mask sum = 27, frac = 0.781
[Mon Apr 30 00:46:32 2012] Giving source the simple spatial ID 20 for pass 1, mean size = 10.61"
[Mon Apr 30 02:29:11 2012] fullrun_mos2_xmm0504160101_pi300-10000_cl_pass1_src20.ximg exists
[Mon Apr 30 02:29:11 2012] fullrun_mos2_xmm0504160101_pi300-10000_cl_pass1_src20_1.ximg exists
[Mon Apr 30 02:29:11 2012] Fit fullrun_mos2_xmm0504160101_pi300-10000_cl_pass1_src20 appears to have run properly
[Mon Apr 30 02:29:11 2012] fullrun_mos2_xmm0504160101_pi300-10000_cl_pass1_tfrozen_src20.ximg exists
[Mon Apr 30 02:29:11 2012] fullrun_mos2_xmm0504160101_pi300-10000_cl_pass1_tfrozen_src20_1.ximg exists
[Mon Apr 30 02:29:11 2012] Fit fullrun_mos2_xmm0504160101_pi300-10000_cl_pass1_tfrozen_src20 appears to have run properly
[Mon Apr 30 02:29:44 2012] Warning: source 20 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 9 at 14.555268 pixels away
[Mon Apr 30 02:29:44 2012] Vigneting correction estimate = 1.000000
[Mon Apr 30 02:29:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Apr 30 02:29:44 2012] Assessing source extent using major
[Mon Apr 30 02:29:44 2012] Source does appear to be extended
[Mon Apr 30 02:29:44 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Apr 30 06:34:51 2012] XMMSAS src. selection expression = ellipse(31704.036133, 34115.060272, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Apr 30 06:34:51 2012] Writing source region out to fullrun_mos2_xmm0504160101_pi300-10000_pass1_cl_src9_src.reg
[Mon Apr 30 06:34:51 2012] Extracting stamp from image fullrun_mos2_xmm0504160101_pi300-10000_cl_sm2.00.img.gz, (327, 355) - (402, 430)
[Mon Apr 30 06:34:51 2012] XMMSAS bgd. selection expression = annulus(31704.036133, 34115.060272, 1087.500000, 2175.000000, X, Y) && !ellipse(29499.618408, 36072.491241, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Apr 30 06:34:51 2012] Writing fullrun_mos2_xmm0504160101_pi300-10000_pass1_cl_src9.gif
[Mon Apr 30 06:49:05 2012] Mean detx,y = (1556.05, 8414.21) 
[Mon Apr 30 06:49:06 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Apr 30 06:49:39 2012] Binned source spectrum to 10 counts/bin
[Mon Apr 30 06:49:39 2012] Setting source spectrum file to fullrun_mos2_xmm0504160101_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Mon Apr 30 06:49:39 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0504160101_pi300-10000_pass1_cl_src9_bgd.pi.gz
[Mon Apr 30 08:28:36 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Apr 30 08:28:36 2012] rmf not generated due to insufficient counts
[Mon Apr 30 09:03:59 2012] Updating aperture counts using extracted products
[Mon Apr 30 09:03:59 2012] Error reading totcts from fullrun_mos2_xmm0504160101_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Mon Apr 30 09:04:00 2012] Calculating source flux in energy range 0.30-8.00
[Mon Apr 30 09:04:00 2012] Using photon index=1.80, rate=0.00231, arf fullrun_mos2_xmm0504160101_pi300-10000_pass1_cl_src9.arf
[Mon Apr 30 09:04:00 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Apr 30 09:04:00 2012] Updating source flux to 4.4e-14
[Mon Apr 30 09:05:12 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting