[Sun Apr 29 13:48:04 2012] Detection parameters:
  Position = (352.2, 292.6) = 0 57 15.73 -26 17 50.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 59.6 +/- 13.9
  Background counts = 51.8
  Rate = 0.001 +/- 0.0003

[Sun Apr 29 13:48:04 2012] Off-axis axis estimate = 3.92'
[Sun Apr 29 18:28:24 2012] Using EEF radius (= 8.39 ")to estimate initial spatial extent for simple fitting
[Sun Apr 29 18:28:24 2012] Initial guess for spatial extent in simple fitting = 8.39"
[Sun Apr 29 18:28:24 2012] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.060
[Sun Apr 29 18:28:24 2012] Giving source the simple spatial ID 45 for pass 0, mean size = 8.39"
[Sun Apr 29 20:40:49 2012] fullrun_mos2_xmm0504160101_pi300-10000_cl_pass0_src45.ximg exists
[Sun Apr 29 20:40:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504160101_pi300-10000_cl_pass0_src45.csv
[Sun Apr 29 20:40:49 2012] fullrun_mos2_xmm0504160101_pi300-10000_cl_pass0_src45_1.ximg exists
[Sun Apr 29 20:40:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504160101_pi300-10000_cl_pass0_src45.csv
[Sun Apr 29 20:40:49 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504160101_pi300-10000_cl_pass0_src45_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504160101_pi300-10000_cl_pass0_src45.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Apr 29 20:40:50 2012] fullrun_mos2_xmm0504160101_pi300-10000_cl_pass0_tfrozen_src45.ximg exists
[Sun Apr 29 20:40:50 2012] fullrun_mos2_xmm0504160101_pi300-10000_cl_pass0_tfrozen_src45_1.ximg exists
[Sun Apr 29 20:40:50 2012] Fit fullrun_mos2_xmm0504160101_pi300-10000_cl_pass0_tfrozen_src45 appears to have run properly
[Sun Apr 29 20:41:26 2012] Source 40 is offset by -1.961260 and 0.034596 pixels which is larger than
2 X fitted extent = 0.964230 x 0.964230, not incorporating fit results
[Sun Apr 29 20:41:26 2012] Vigneting correction estimate = 1.000000
[Sun Apr 29 20:41:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Apr 29 20:41:26 2012] Assessing source extent using major
[Sun Apr 29 20:41:26 2012] Source does appear to be extended
[Sun Apr 29 20:41:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Apr 29 20:41:26 2012] Source is confused with source 41
[Mon Apr 30 00:46:32 2012] Using EEF radius (= 8.39 ")to estimate initial spatial extent for simple fitting
[Mon Apr 30 00:46:32 2012] Initial guess for spatial extent in simple fitting = 8.39"
[Mon Apr 30 00:46:32 2012] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.060
[Mon Apr 30 00:46:32 2012] Giving source the simple spatial ID 42 for pass 1, mean size = 8.39"
[Mon Apr 30 02:29:11 2012] fullrun_mos2_xmm0504160101_pi300-10000_cl_pass1_src42.ximg exists
[Mon Apr 30 02:29:11 2012] fullrun_mos2_xmm0504160101_pi300-10000_cl_pass1_src42_1.ximg exists
[Mon Apr 30 02:29:11 2012] Fit fullrun_mos2_xmm0504160101_pi300-10000_cl_pass1_src42 appears to have run properly
[Mon Apr 30 02:29:12 2012] fullrun_mos2_xmm0504160101_pi300-10000_cl_pass1_tfrozen_src42.ximg exists
[Mon Apr 30 02:29:12 2012] fullrun_mos2_xmm0504160101_pi300-10000_cl_pass1_tfrozen_src42_1.ximg exists
[Mon Apr 30 02:29:12 2012] Fit fullrun_mos2_xmm0504160101_pi300-10000_cl_pass1_tfrozen_src42 appears to have run properly
[Mon Apr 30 02:29:44 2012] Spatial fit model total counts = 1780.810000, observed total counts = 1780.000000
[Mon Apr 30 02:29:44 2012] Offset between fit and detection position for source 40 = 5.336563 pixels
[Mon Apr 30 02:29:44 2012] Warning, changing simple spatial fit ID from 42 to 11
[Mon Apr 30 02:29:44 2012] 1720.824000 total counts/ 1614.230000 bgd. counts: snr = 2.653078
Spatial fit parameters:
  Offset between fit and detection position for source 40 = 5.336563 pixels
  Position = (350.3, 297.6) = 0 57 16.34 -26 17 27.2
  Extent = 16.2 (16.2-32.4)", rotation angle = 0
  Source counts = 106.6 +/- 41.5
  Background counts = 1614.2
  Rate = 0.002 +/- 0.0007
[Mon Apr 30 02:29:44 2012] Vigneting correction estimate = 1.000000
[Mon Apr 30 02:29:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Apr 30 02:29:44 2012] Assessing source extent using major axis lower bound
[Mon Apr 30 02:29:44 2012] Source does appear to be extended
[Mon Apr 30 02:29:44 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Apr 30 06:34:51 2012] XMMSAS src. selection expression = ellipse(30428.096000, 25839.852000, 972.522028, 972.522028, 0.000000, X, Y)
[Mon Apr 30 06:34:51 2012] Writing source region out to fullrun_mos2_xmm0504160101_pi300-10000_pass1_cl_src40_src.reg
[Mon Apr 30 06:34:51 2012] Extracting stamp from image fullrun_mos2_xmm0504160101_pi300-10000_cl_sm2.00.img.gz, (294, 242) - (406, 353)
[Mon Apr 30 06:34:51 2012] XMMSAS bgd. selection expression = annulus(30428.096000, 25839.852000, 1620.870047, 3241.740093, X, Y) && !ellipse(28914.472000, 26501.860000, 1971.312057, 1971.312057, 0.000000, X, Y) && !ellipse(32689.450256, 23628.358307, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29924.622223, 26235.055450, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29647.386719, 27333.834015, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28127.371826, 27726.287170, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27625.141174, 26054.627625, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27880.817841, 25166.716797, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29675.488000, 25029.732000, 1266.760036, 1266.760036, 0.000000, X, Y) && !ellipse(26600.376862, 27520.535675, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26481.402344, 26586.761871, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27350.969574, 25396.761810, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30144.448029, 27258.216125, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28522.588867, 25026.032104, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34132.304688, 21951.533401, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30544.717590, 27010.419586, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27857.160000, 28254.354000, 1219.088035, 1219.088035, 0.000000, X, Y) && !ellipse(30239.612244, 25297.291138, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26729.844055, 24918.314911, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Apr 30 06:34:51 2012] Writing fullrun_mos2_xmm0504160101_pi300-10000_pass1_cl_src40.gif
[Mon Apr 30 06:55:10 2012] Mean detx,y = (-2289.76, 1013.14) 
[Mon Apr 30 06:55:11 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Apr 30 06:55:23 2012] Binned source spectrum to 10 counts/bin
[Mon Apr 30 06:55:23 2012] Setting source spectrum file to fullrun_mos2_xmm0504160101_pi300-10000_pass1_cl_src40_src_b10.pi.gz
[Mon Apr 30 06:55:23 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0504160101_pi300-10000_pass1_cl_src40_bgd.pi.gz
[Mon Apr 30 09:04:00 2012] Updating aperture counts using extracted products
[Mon Apr 30 09:04:00 2012] Error reading totcts from fullrun_mos2_xmm0504160101_pi300-10000_pass1_cl_src40_src_b10.pi.gz
[Mon Apr 30 09:04:01 2012] Calculating source flux in energy range 0.30-8.00
[Mon Apr 30 09:04:01 2012] Using photon index=1.80, rate=0.00188, arf fullrun_mos2_xmm0504160101_pi300-10000_pass1_cl_src40.arf
[Mon Apr 30 09:04:01 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Apr 30 09:04:01 2012] Updating source flux to 1.8e-14
[Mon Apr 30 09:05:12 2012] Flag b found in src. 40 procflags, skipping spectral fitting
[Mon Apr 30 09:05:12 2012] Flag c found in src. 40 procflags, skipping spectral fitting