[Sun Apr 29 13:48:04 2012] Detection parameters:
  Position = (394.4, 202.2) = 0 57 2.04 -26 24 21.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 114.8 +/- 14.6
  Background counts = 23.5
  Rate = 0.003 +/- 0.0004

[Sun Apr 29 13:48:04 2012] Off-axis axis estimate = 9.86'
[Sun Apr 29 18:28:24 2012] Using EEF radius (= 11.36 ")to estimate initial spatial extent for simple fitting
[Sun Apr 29 18:28:24 2012] Initial guess for spatial extent in simple fitting = 11.36"
[Sun Apr 29 18:28:24 2012] source mask rpix=2.6, npix_max = 38, mask sum = 42, frac = 1.085
[Sun Apr 29 18:28:24 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 11.36"
[Sun Apr 29 20:40:49 2012] fullrun_mos2_xmm0504160101_pi300-10000_cl_pass0_src11.ximg exists
[Sun Apr 29 20:40:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504160101_pi300-10000_cl_pass0_src11.csv
[Sun Apr 29 20:40:49 2012] fullrun_mos2_xmm0504160101_pi300-10000_cl_pass0_src11_1.ximg exists
[Sun Apr 29 20:40:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504160101_pi300-10000_cl_pass0_src11.csv
[Sun Apr 29 20:40:49 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504160101_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504160101_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Apr 29 20:40:50 2012] fullrun_mos2_xmm0504160101_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Sun Apr 29 20:40:50 2012] fullrun_mos2_xmm0504160101_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Sun Apr 29 20:40:50 2012] Fit fullrun_mos2_xmm0504160101_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly
[Sun Apr 29 20:41:26 2012] Warning: source 11 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 26 at 12.180434 pixels away
[Sun Apr 29 20:41:26 2012] Vigneting correction estimate = 1.000000
[Sun Apr 29 20:41:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Apr 29 20:41:26 2012] Assessing source extent using major
[Sun Apr 29 20:41:26 2012] Source does appear to be extended
[Sun Apr 29 20:41:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Apr 30 00:46:32 2012] Using EEF radius (= 11.36 ")to estimate initial spatial extent for simple fitting
[Mon Apr 30 00:46:32 2012] Initial guess for spatial extent in simple fitting = 11.36"
[Mon Apr 30 00:46:32 2012] source mask rpix=2.6, npix_max = 38, mask sum = 42, frac = 1.085
[Mon Apr 30 00:46:32 2012] Giving source the simple spatial ID 10 for pass 1, mean size = 11.36"
[Mon Apr 30 02:29:10 2012] fullrun_mos2_xmm0504160101_pi300-10000_cl_pass1_src10.ximg exists
[Mon Apr 30 02:29:10 2012] fullrun_mos2_xmm0504160101_pi300-10000_cl_pass1_src10_1.ximg exists
[Mon Apr 30 02:29:10 2012] Fit fullrun_mos2_xmm0504160101_pi300-10000_cl_pass1_src10 appears to have run properly
[Mon Apr 30 02:29:11 2012] fullrun_mos2_xmm0504160101_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Mon Apr 30 02:29:11 2012] fullrun_mos2_xmm0504160101_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Mon Apr 30 02:29:11 2012] Fit fullrun_mos2_xmm0504160101_pi300-10000_cl_pass1_tfrozen_src10 appears to have run properly
[Mon Apr 30 02:29:44 2012] Warning: source 10 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 26 at 10.508937 pixels away
[Mon Apr 30 02:29:44 2012] Vigneting correction estimate = 1.000000
[Mon Apr 30 02:29:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Apr 30 02:29:44 2012] Assessing source extent using major
[Mon Apr 30 02:29:44 2012] Source does appear to be extended
[Mon Apr 30 02:29:44 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Apr 30 06:34:51 2012] XMMSAS src. selection expression = ellipse(34265.730530, 17538.853470, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Apr 30 06:34:51 2012] Writing source region out to fullrun_mos2_xmm0504160101_pi300-10000_pass1_cl_src26_src.reg
[Mon Apr 30 06:34:51 2012] Extracting stamp from image fullrun_mos2_xmm0504160101_pi300-10000_cl_sm2.00.img.gz, (357, 165) - (432, 240)
[Mon Apr 30 06:34:51 2012] XMMSAS bgd. selection expression = annulus(34265.730530, 17538.853470, 1087.500000, 2175.000000, X, Y) && !ellipse(34719.597168, 14983.351929, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Apr 30 06:34:51 2012] Writing fullrun_mos2_xmm0504160101_pi300-10000_pass1_cl_src26.gif
[Mon Apr 30 06:46:37 2012] Mean detx,y = (-10507.62, -3263.09) 
[Mon Apr 30 06:46:38 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Apr 30 06:46:46 2012] Binned source spectrum to 10 counts/bin
[Mon Apr 30 06:46:46 2012] Setting source spectrum file to fullrun_mos2_xmm0504160101_pi300-10000_pass1_cl_src26_src_b10.pi.gz
[Mon Apr 30 06:46:46 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0504160101_pi300-10000_pass1_cl_src26_bgd.pi.gz
[Mon Apr 30 08:27:25 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Apr 30 08:27:25 2012] rmf not generated due to insufficient counts
[Mon Apr 30 09:03:58 2012] Updating aperture counts using extracted products
[Mon Apr 30 09:03:58 2012] Error reading totcts from fullrun_mos2_xmm0504160101_pi300-10000_pass1_cl_src26_src_b10.pi.gz
[Mon Apr 30 09:04:00 2012] Calculating source flux in energy range 0.30-8.00
[Mon Apr 30 09:04:00 2012] Using photon index=1.80, rate=0.00347, arf fullrun_mos2_xmm0504160101_pi300-10000_pass1_cl_src26.arf
[Mon Apr 30 09:04:00 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Apr 30 09:04:00 2012] Updating source flux to 6e-14
[Mon Apr 30 09:05:12 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting