[Sun Apr 29 13:48:03 2012] Detection parameters:
  Position = (341.3, 314.7) = 0 57 19.25 -26 16 9.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 153.1 +/- 19.1
  Background counts = 65.9
  Rate = 0.003 +/- 0.0004

[Sun Apr 29 13:48:04 2012] Off-axis axis estimate = 3.33'
[Sun Apr 29 18:28:24 2012] Using EEF radius (= 8.09 ")to estimate initial spatial extent for simple fitting
[Sun Apr 29 18:28:24 2012] Initial guess for spatial extent in simple fitting = 8.09"
[Sun Apr 29 18:28:24 2012] source mask rpix=1.9, npix_max = 22, mask sum = 24, frac = 1.077
[Sun Apr 29 18:28:24 2012] Giving source the simple spatial ID 14 for pass 0, mean size = 8.09"
[Sun Apr 29 20:40:49 2012] fullrun_mos2_xmm0504160101_pi300-10000_cl_pass0_src14.ximg exists
[Sun Apr 29 20:40:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504160101_pi300-10000_cl_pass0_src14.csv
[Sun Apr 29 20:40:49 2012] fullrun_mos2_xmm0504160101_pi300-10000_cl_pass0_src14_1.ximg exists
[Sun Apr 29 20:40:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504160101_pi300-10000_cl_pass0_src14.csv
[Sun Apr 29 20:40:49 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504160101_pi300-10000_cl_pass0_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504160101_pi300-10000_cl_pass0_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Apr 29 20:40:50 2012] fullrun_mos2_xmm0504160101_pi300-10000_cl_pass0_tfrozen_src14.ximg exists
[Sun Apr 29 20:40:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504160101_pi300-10000_cl_pass0_tfrozen_src14.csv
[Sun Apr 29 20:40:50 2012] fullrun_mos2_xmm0504160101_pi300-10000_cl_pass0_tfrozen_src14_1.ximg exists
[Sun Apr 29 20:40:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504160101_pi300-10000_cl_pass0_tfrozen_src14.csv
[Sun Apr 29 20:40:50 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504160101_pi300-10000_cl_pass0_tfrozen_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504160101_pi300-10000_cl_pass0_tfrozen_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Apr 29 20:41:26 2012] Warning, spatial fit 14 centroid is now closest to src. 4
[Sun Apr 29 20:41:26 2012] Vigneting correction estimate = 1.000000
[Sun Apr 29 20:41:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Apr 29 20:41:26 2012] Assessing source extent using major
[Sun Apr 29 20:41:26 2012] Source does appear to be extended
[Sun Apr 29 20:41:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Apr 29 20:41:26 2012] Source is confused with source 1
[Sun Apr 29 20:41:26 2012] Source is confused with source 31
[Mon Apr 30 00:46:32 2012] Using EEF radius (= 8.09 ")to estimate initial spatial extent for simple fitting
[Mon Apr 30 00:46:32 2012] Initial guess for spatial extent in simple fitting = 8.09"
[Mon Apr 30 00:46:32 2012] source mask rpix=1.9, npix_max = 22, mask sum = 24, frac = 1.077
[Mon Apr 30 00:46:32 2012] Giving source the simple spatial ID 13 for pass 1, mean size = 8.09"
[Mon Apr 30 02:29:10 2012] fullrun_mos2_xmm0504160101_pi300-10000_cl_pass1_src13.ximg exists
[Mon Apr 30 02:29:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504160101_pi300-10000_cl_pass1_src13.csv
[Mon Apr 30 02:29:10 2012] fullrun_mos2_xmm0504160101_pi300-10000_cl_pass1_src13_1.ximg exists
[Mon Apr 30 02:29:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504160101_pi300-10000_cl_pass1_src13.csv
[Mon Apr 30 02:29:10 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504160101_pi300-10000_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504160101_pi300-10000_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Apr 30 02:29:11 2012] fullrun_mos2_xmm0504160101_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Mon Apr 30 02:29:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504160101_pi300-10000_cl_pass1_tfrozen_src13.csv
[Mon Apr 30 02:29:11 2012] fullrun_mos2_xmm0504160101_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Mon Apr 30 02:29:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0504160101_pi300-10000_cl_pass1_tfrozen_src13.csv
[Mon Apr 30 02:29:11 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0504160101_pi300-10000_cl_pass1_tfrozen_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0504160101_pi300-10000_cl_pass1_tfrozen_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Apr 30 02:29:44 2012] Source 19 is offset by -1.830635 and -0.423195 pixels which is larger than
2 X fitted extent = 1.395333 x 1.395333, not incorporating fit results
[Mon Apr 30 02:29:44 2012] Warning, spatial fit 13 centroid is now closest to src. 31
[Mon Apr 30 02:29:44 2012] Vigneting correction estimate = 1.000000
[Mon Apr 30 02:29:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Apr 30 02:29:44 2012] Assessing source extent using major
[Mon Apr 30 02:29:44 2012] Source does appear to be extended
[Mon Apr 30 02:29:44 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Apr 30 06:34:51 2012] XMMSAS src. selection expression = ellipse(29647.386719, 27333.834015, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Apr 30 06:34:51 2012] Writing source region out to fullrun_mos2_xmm0504160101_pi300-10000_pass1_cl_src19_src.reg
[Mon Apr 30 06:34:51 2012] Extracting stamp from image fullrun_mos2_xmm0504160101_pi300-10000_cl_sm2.00.img.gz, (304, 277) - (379, 352)
[Mon Apr 30 06:34:51 2012] XMMSAS bgd. selection expression = annulus(29647.386719, 27333.834015, 1087.500000, 2175.000000, X, Y) && !ellipse(28914.472000, 26501.860000, 1971.312057, 1971.312057, 0.000000, X, Y) && !ellipse(29924.622223, 26235.055450, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28127.371826, 27726.287170, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27625.141174, 26054.627625, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27880.817841, 25166.716797, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29675.488000, 25029.732000, 1266.760036, 1266.760036, 0.000000, X, Y) && !ellipse(27350.969574, 25396.761810, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30144.448029, 27258.216125, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28522.588867, 25026.032104, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30544.717590, 27010.419586, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27857.160000, 28254.354000, 1219.088035, 1219.088035, 0.000000, X, Y) && !ellipse(30428.096000, 25839.852000, 1296.696037, 1296.696037, 0.000000, X, Y) && !ellipse(30239.612244, 25297.291138, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26729.844055, 24918.314911, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Apr 30 06:34:51 2012] Writing fullrun_mos2_xmm0504160101_pi300-10000_pass1_cl_src19.gif
[Mon Apr 30 06:47:17 2012] Mean detx,y = (-960.12, 1673.82) 
[Mon Apr 30 06:47:18 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Apr 30 06:47:27 2012] Binned source spectrum to 10 counts/bin
[Mon Apr 30 06:47:27 2012] Setting source spectrum file to fullrun_mos2_xmm0504160101_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Mon Apr 30 06:47:27 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0504160101_pi300-10000_pass1_cl_src19_bgd.pi.gz
[Mon Apr 30 08:27:42 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Apr 30 08:27:42 2012] rmf not generated due to insufficient counts
[Mon Apr 30 09:03:58 2012] Updating aperture counts using extracted products
[Mon Apr 30 09:03:58 2012] Error reading totcts from fullrun_mos2_xmm0504160101_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Mon Apr 30 09:04:00 2012] Calculating source flux in energy range 0.30-8.00
[Mon Apr 30 09:04:00 2012] Using photon index=1.80, rate=0.00313, arf fullrun_mos2_xmm0504160101_pi300-10000_pass1_cl_src19.arf
[Mon Apr 30 09:04:00 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Apr 30 09:04:00 2012] Updating source flux to 3.3e-14
[Mon Apr 30 09:05:12 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting